







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Windows & Doors: The Homestead Owner’s Guide
We install and service Belgard-compatible windows and doors across Homestead, and a typical installed project lands between $4,500 and $15,000 for window replacement or $8,000 to $25,000 for full impact glazing. That price is a written flat number handed to you before anyone picks up a tool, with a scope and a warranty attached to it. Belgard builds to the same opening dimensions as the major Florida lines, so replacing a failed unit usually means a direct swap rather than cutting a new rough opening.
Most Homestead owners find out something is wrong the same way: a window in a 2018-built home starts fogging between the panes after a wet season, or a sliding door gets hard to lock once the humidity climbs. Others spot it after a storm when a single pane in a multi-panel unit cracks while the rest hold. We are an independent service provider and not affiliated with Belgard, so our job is matching the correct replacement to your unit and showing you the photo record of what we found.
Which Belgard Models This Applies To

Belgard window and door products show up across Homestead subdivisions built between roughly 2014 and 2024, and the same model line has changed spec more than once in that window. The fastest way to identify what you have is the manufacturer label etched or stickered on the upper corner of the glass or the interior frame: it carries a model number, a series code, and a date stamp. If the label has faded, we pull the dimensions of the opening (width, height, and jamb depth), which is what actually determines fit.
The OEM-versus-aftermarket decision matters more here than with most brands. Belgard uses proprietary hardware on some of its impact-rated sliders: the lock and roller assemblies are not interchangeable with the older domestic lines, and a generic replacement latch can leave the unit unable to pass an impact inspection. For glass, a quality aftermarket insulated unit matched to the same thickness and rating performs identically and costs less. For the frame hardware, we source to the Belgard spec first. Bring us the label or let us measure and we’ll say which path makes sense for your Homestead home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Windows & Doors Is Failing
- Fogging or condensation between the panes. The sealed insulated unit has lost its seal, and Florida humidity has worked its way into the gap. You can’t wipe it clear because it’s inside the glass sandwich.
- A door that sticks, drags, or won’t lock. Expansion and contraction from heat, plus settling in the slab, throw the frame out of square. Ignored, the deadbolt stops catching the strike plate.
- A single pane cracked while the rest are intact. That’s impact damage from flying debris, and it points to a unit that met its rated limit. Leaving it in place on a Homestead window weakens the whole assembly.
- Water on the interior sill after rain. The weatherstripping has flattened or the weep holes in the frame are clogged. This is the leading cause of rotted interior trim and drywall staining we see.
- Drafts or heat coming through a closed window. The gaskets have compressed and no longer seal the frame to the sash. You’ll notice it first on a south- or west-facing window in the afternoon.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A single-unit window replacement in Homestead runs $450 to $1,200 installed for a standard-builder-grade unit, and a full-home window replacement sits in the $4,500 to $15,000 range from our published pricing. Full impact-rated window installation is $8,000 to $25,000. The range is driven by four things: size and configuration, impact rating, tempered versus standard glass, and whether the old frame comes out cleanly or needs repair. A sliding glass door costs more than a fixed picture window of the same size.
Every quote we write is a flat price with a written scope and a written warranty, and the price you see is the price you agreed to – no change proceeds without a signed change order. The work is covered by our 365-Day Done Right Promise: if it isn’t done right, we make it right. That promise is backed by terms, not an asterisk.
| Project | Installed Price Range |
|---|---|
| Single standard window replacement | $450 – $1,200 |
| Full-home window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
DIY or Call Us?
A homeowner can safely check a few things: look for the glass label and read the model number, wipe the weep holes clear of dirt, and test whether a door’s deadbolt still lines up with its strike plate. Hand tools only.
Where it turns dangerous or wasteful: removing an insulated glass unit from an impact-rated frame, resetting a jammed sliding door with the rollers under tension, and re-glazing a second-story window all involve weight, glass, or working at height. Dropping a pane of tempered glass is how people get badly cut. Impact-rated glass and hardware are heavy, and a badly seated unit leaks the first time it rains on a Homestead afternoon.
If the label is gone and you’re not sure of the model, or the failure is at the frame rather than the glass, call us at (844) 834-4248 and we’ll send out a technician to measure and match.
FAQs

Most Belgard windows in Homestead last 20 to 25 years for the frame, but the sealed glass unit often fails first, usually between 10 and 15 years under South Florida heat and humidity. Builders whose units were installed in the mid-2010s are now at the front end of that window. Call (844) 834-4248 for a free estimate on a replacement unit.
Often yes – a failed lock, roller, or weatherstripping can be replaced while the frame and glass stay. A fogged insulated glass unit is a glass-only replacement rather than a whole window, which keeps the cost down. Once the frame itself is warped or rotted, replacement makes more sense. Call (844) 834-4248 and we’ll tell you which path we recommend.
A single window or door replacement on a Belgard opening is usually a half day to a full day, and a full-home window replacement is typically one to three days depending on the count. We don’t schedule this for same-day because a proper install needs measurement, sourcing, and a weather window. Call (844) 834-4248 to schedule your free estimate.
We source through a network of fifty-plus vetted material brands and match the Belgard spec from your label or opening measurements, so the part coming in fits the frame going out. We don’t carry stock or parts on a truck – the replacement is ordered to your unit. We also work with KraftMaid, Cambria, and Silestone where a project calls for them. Call (844) 834-4248 and we’ll walk you through it.
Matching the right Belgard-compatible window or door to your Homestead home comes down to a label, a measurement, and a written price before anyone starts. Call (844) 834-4248 to schedule your free estimate. We’ll bring the photo record, the flat price, and the warranty terms in writing.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












