







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Homestead Owner’s Guide
We install and service Unilock-compatible windows and doors for Homestead homeowners. Most full window replacement here runs $4,500 – $15,000, and impact-rated whole-home packages run $8,000 – $25,000. We don’t promise same-day installs on planned window work, but we do give you a written, flat price before anything is ordered. First, tell us what you’re seeing.
Unilock windows tend to fail quietly in South Florida. Owners usually notice a symptom before they notice the part: a whistling sound at a corner during a summer squall, condensation trapped between panes that won’t clear after a dry week, a door that drags against the threshold by mid-July, or a latch that no longer grabs without a shoulder into it. Someone in Homestead calls us after the third time a storm rattled a bedroom window and they finally felt the air come through. Others find the failure in the hardware: a multipoint lock that stopped engaging, a hinge that sagged, or a seal that cracked in the UV sun off the southern exposure.
Rowan Construction Group Homestead is an independent service provider. We’re not affiliated with Unilock. When you call us, you get an honest diagnosis of the failed component and a written scope before anyone touches the opening.
Which Unilock Models This Applies To

Unilock sells window and door lines across several categories. Knowing which one you have keeps a replacement from landing on the wrong part.
The easiest identification step is the etched label on the glass corner or the manufacturer’s sticker on the frame. Every ordered window has a production tag. If the label is gone, photograph the frame profile, note the rough opening dimensions in fractions of an inch, and measure the glass thickness. Unilock’s sliding and single-hung lines use profiles that differ by series, so a match depends on those measurements, not on the name you remember from paperwork.
Be careful about what “Unilock-compatible” means. It does not mean the part came out of the Unilock factory. It means the replacement part fits the existing opening and meets the same air, water, and structural spec the original was sold under. For windows and doors, we match on rough opening, sill profile, nailing flange depth, glass package (single-pane versus laminated impact), and hardware mounting pattern. Two windows can look identical from the street and still not swap a single component.
For a failed weatherstrip, screen frame, or hardware set, a quality aftermarket part is honest and cheaper. For a failed insulated glass unit (sealed pane with a fogged look between the two sheets), the soundest path is a full sash or window replacement rather than a glass-only fix, because resealing a laminated impact pane in the field loses the Florida product approval that originally passed the impact test. We’ll say so plainly when we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Fogging between panes. That’s a failed seal in the insulated glass unit, not surface moisture. Once the desiccant inside is saturated, the fog never clears and the window has lost its insulating value.
- Whistling or draft at the frame. Usually a worn weatherstrip, a cracked glazing bead, or a frame that has shifted against the rough opening in Homestead’s high-humidity cycle of expansion and contraction.
- A door that sticks or drags. A sagged hinge, a swollen wood slab, or a threshold that has lost its seal. On an impact door, dragging can also mean the frame tolerance has been lost, which weakens the assembly’s rated performance.
- Water staining on the interior sill. Water is entering above the sill at the head or jamb, or from a failed perimeter seal behind the nailing flange. Left alone, this wets the wall cavity, not just the drywall.
- Latch or multipoint lock stops engaging. A misaligned strike, a worn gearbox, or a warp in the panel. A door that won’t latch is a security problem, so this one gets handled promptly, not saved for the spring.
Each of those symptoms points to a specific part. A weatherstrip is a cheap fix. Fogging is a sealed-unit replacement. Sill water is often a wall-and-seal issue, not the window itself. Naming the actual cause is what makes the quote honest.
Replacement Cost & What’s Included

Here are installed ranges we write for Homestead jobs. The price is the all-in number a homeowner can compare, not a line-item estimate with a footnote.
| Scope | Installed Price Range (Homestead) |
|---|---|
| Single window replacement | $500 – $1,600 each |
| Whole-home window replacement | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Door replacement (entry, patio, or slider) | $1,200 – $3,800 each |
| Sealed unit (fogged pane) swap | Quoted per opening |
| Weatherstrip or hardware repair | $150 – $450 |
What drives the range: window count and size, impact-rated versus standard glazing, the state of the rough opening and framing, and whether the existing trim and sill can be reused. When we quote, the price includes the part, removal and disposal, installation, sealing and flashing at the opening, and the warranty on the work. Under Clause 1 of The Haven Standard, that number is written and signed before we order a single pane, and no change proceeds without a signed change order. Rowan’s 365-Day Done Right Promise covers the installation: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a lot of what’s going on. Run a hand along the frame during a storm to find the draft. Open and shut every window on a dry day and listen for the latch. Wipe condensation off both sides of the glass and see if the fog comes back within an hour. Take a photo of the manufacturer’s label if you can find it. Those checks cost nothing and make a diagnosis faster.
What we don’t recommend is a DIY glass swap on a laminated impact window. Those panes are heavy, they can shatter under their own weight if the frame is unclamped, and a resealed pane loses the product approval that Homestead’s wind-load requirements depend on. Same goes for cutting a rough opening wider to fit a part that isn’t right. A window that fits the hole and doesn’t match the wall’s rated resistance is a bigger problem than the one you started with.
When you’re ready for a written price, call (844) 834-4248. We’ll bring the measurements, show you what we found, and install it with a documented photo record on every visit.
FAQs

In Homestead’s sun and salt air, a quality impact-rated window can hold up 20 to 25 years with reasonable care, while a standard non-impact window should be inspected more often. UV exposure on the coastal side and the expansion cycle from afternoon thunderstorms are the two things that age the seals and hardware fastest. Homeowners in the area often see the first weatherstrip failure around year 10 to 12. Call (844) 834-4248 and we’ll inspect your openings and tell you what’s left in them.
Yes, if only the sealed glass unit has failed, the sealed unit can often be swapped without disturbing the frame. That can save money over a full window replacement. It can’t be repaired in a field reseal once a laminated impact pane is involved, because the reseal voids the product approval. Our team will tell you which of those you’re looking at before any work starts.
A single window or door replacement typically takes one day; a whole-home window package can run two to four days, depending on count and how much trim needs to be reset. Weather and the condition of the surrounding framing are the two things that can extend it. We confirm the schedule in the written scope, so you know when the crew is arriving. Call (844) 834-4248 to get your date on the calendar.
We identify the original series from the label or the measured profile, then source the matching component from a vetted supplier. Rowan works across more than fifty brands, including KraftMaid, Cambria, and Silestone, and our window and door sourcing follows the same plain standard: match the spec first, then the price. You get a written quote naming the part, the price, and the warranty, and the documented photo record is yours to keep.
Get a Written Price on Your Unilock Window or Door
If you’re in Homestead and a window, door, or hardware set has failed, we’ll come measure, identify the part, and hand you a written flat price. Rowan Construction Group has done 4,000-plus projects since 2007, and every one started with a written scope before anyone picked up a tool. The 365-Day Done Right Promise, no-hassle upfront pricing, a Free Second Opinion on any written estimate, and documented photo records are standard offers. Call (844) 834-4248 to schedule your free estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












