







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Homestead Owner’s Guide
Tremron is a Florida-based paver manufacturer, and its products are everywhere in Homestead – from the older subdivisions off Krome Avenue to the newer builds out near the Speedway. If you’re reading this page, you likely have a Tremron paver driveway, walkway, or patio that’s cracking, settling, or draining wrong. We install, repair, and replace Tremron paver systems across Homestead, with typical installed paver driveway pricing running $7,000 to $18,000 depending on square footage and base prep. We are an independent contractor and are not affiliated with Tremron.
Most Homestead owners discover a paver problem the same way: a low spot holds water after a summer storm, a paver near the driveway apron rocks underfoot, or a hairline crack spreads across a few units after a cold snap. Limestone-rich soil and heavy seasonal rain put real stress on any paver base here.
Key Takeaways
- Tremron pavers themselves are durable; failures usually trace to base prep, edge restraint, or drainage, not the paver.
- Installed paver driveway pricing in Homestead: $7,000-$18,000. Paver patio: $3,500-$11,000.
- Small repairs (reseating a few units, re-sanding joints) are often a few hundred dollars. Full replacement is a base-up job.
- We write the price before work starts and don’t proceed on any change without your signed change order.
Which Tremron Models This Applies To

Tremron makes several paver lines, and the one on your property matters for matching. The most common in South Florida residential driveways are Tremron’s Olde Towne, Plaza, and Mega Oldenburg styles – each with a different face profile and dimensional tolerance. The Olde Towne and Olde Boston lines are a tumbled, antiqued look with softer edges; Plaza is a more uniform, flat-top style; Mega Oldenburg is a larger-format slab used on modern driveways and pool decks. Face dimensions run roughly 4×8, 6×9, and up to 12×12 inches depending on the line, and thickness is typically 60mm for pedestrian and light-vehicle use, 80mm for driveways.
To identify what you have, lift a loose paver if you can, or look at an exposed edge at the driveway apron or a step riser. Most Tremron pavers carry an embossed mark or molded pattern on the underside. Dimensions plus profile plus underside mark will match you to the right line. Because the OEM replacements are proprietary to those lines, aftermarket equivalents often don’t match the face texture or color series exactly – which matters if you’re patching a visible area. For matching color and profile, we source through Tremron’s authorized distribution, not a generic stone yard. We also work with Belgard and Techo-Bloc when a homeowner wants a compatible look on a new section.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Ponding water after rain. Water sitting in a low spot for hours points to a settled base or a lost slope. In Homestead’s flat lots, a 1-2% slope toward the street or a drain is what moves water off; when it’s gone, the pavers hold it.
- Paver movement or rocking. A paver that shifts underfoot has lost its bedding sand or the base beneath it has failed. This often starts at the driveway apron where tire loads are heaviest.
- Joint sand washing out. Heavy seasonal rain scours sand from the joints, and once joints open, water gets under the pavers and the base erodes. Re-sanding is routine; chronic washout means the drainage is wrong.
- Edge restraint failure. The concrete or plastic edge that locks the field in place cracks or pulls away, and the outer course starts spreading. This is a common failure on older Homestead installs where the edge wasn’t pinned into the base.
- Cracks or spalling in individual units. A crack across one or two pavers is often a point load or a void underneath. Spalling (surface flaking) can follow freeze events, which do happen here in winter, or a paver set on a poorly compacted base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Homestead, using our market rates:
| Work | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000-$18,000 |
| Paver patio installation | $3,500-$11,000 |
| Driveway replacement (remove & reinstall) | $5,000-$14,000 |
| Driveway sealing | $250-$700 |
What drives the range: driveway square footage, whether existing pavers and base are removed, the base depth and compaction needed over Homestead’s soil, drainage corrections, and edge restraint. Parts and labor are listed separately on the written quote – you see the paver cost per square foot, the base material, the sand, the edge, and the labor. Sealing is quoted separately as a maintenance item, not bundled in to pad the number. Every paver install carries our 365-Day Done Right Promise: if it isn’t right, we make it right, backed by the terms page, not an asterisk.
DIY or Call Us?
You can safely check a few things yourself: note where water ponds after a storm, look for rocking pavers and open joints, and inspect the edge restraint along the driveway perimeter. Lifting a loose paver to read the underside mark is fine. What goes wrong on DIY for a paver system is the base – a proper base is excavated, compacted in lifts, and graded to drain. Skipping that step, or patching a settled area without fixing the slope underneath, means the same failure returns after the next rainy season. This isn’t high-voltage work, but a paver driveway is a structural surface under vehicle load, and base mistakes show up fast. For anything beyond re-sanding joints or reseating a couple of units, call us at (844) 834-4248 for a free estimate.
FAQs

Properly installed Tremron pavers typically last 25 to 30 years or more, and the paver itself is rarely what fails first – the base and edge restraint are. In Homestead’s rainy, soil-heavy conditions, re-sanding joints every few years and addressing drainage early gets you to that lifespan. Call (844) 834-4248 for a free estimate on repair or replacement.
Usually yes. A localized area of settled or rocking pavers can be lifted, the base re-compacted and re-graded, and the same pavers reset – often a few hundred dollars rather than a full replacement. Full replacement makes sense when failures are widespread or the base is compromised across the whole drive. Call (844) 834-4248 and we’ll tell you which you’re looking at.
A small repair is typically a day. A full driveway removal and reinstall is usually several days to a week, depending on square footage, base depth, and weather. You’ll get the schedule in writing with the price before anything starts. Call (844) 834-4248 to schedule your free estimate.
We source through Tremron’s authorized distribution so the color series and face profile match what’s already on your property. Because Tremron lines like Olde Towne and Plaza have proprietary textures, a generic stone-yard match often looks off in a patch. We confirm the match before ordering. Call (844) 834-4248 for a free estimate.
If you also need work on other finishes while we’re out, we handle KraftMaid and Cambria and Silestone installations through our kitchen and bath trades, all quoted with a written price before work starts.
Whether your Tremron driveway needs a couple of pavers reset or a full base-up replacement, the number gets written before anyone picks up a tool. Call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate – we’ll walk the surface, tell you what we found in plain terms, and put the price in writing. Background-checked, uniformed technicians; a live person answers calls 24/7; and every visit includes a documented photo record as standard.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












