







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Bathroom Remodeling: The Homestead Owner’s Guide
Cambridge Pavers bathroom remodeling in Homestead runs $9,000 to $28,000 installed, with small bathrooms landing at $5,000 to $12,000 and full gut renovations reaching the top of the range. A typical project takes two to four weeks depending on scope. We install Cambridge Pavers-compatible systems throughout Homestead, and we’re an independent contractor, not affiliated with Cambridge Pavers.
Owners in Homestead usually discover the failure the same way. The grout joint between the floor pavers and the curb starts crumbling. Water wicks under the tile and the thinset softens. Or the shower pan liner, which Cambridge systems typically specify at a 40-mil PVC membrane under a mortar bed, cracks after ten to fifteen years of South Florida’s humidity swing and a hairline gap opens at the drain flange. You see a soft spot underfoot before you see a leak, and by then the substrate is already holding moisture.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers makes its name on interlocking concrete paver systems, and the same engineering runs through its bathroom paver and shower tile lines. The brands you’ll encounter most in Homestead bathrooms are the Cambridge Pavingstones with ArmorTec face and the Cambridge Wallstone series used for shower niches and curb wraps. Tile formats run 4×8-inch to 12×24-inch pavers, with matching bullnose pieces for the shower curb and outside corners.
Finding the right match starts with the original job documentation. Check the invoice or the renovation file from the previous owner for the Cambridge series name and the color/finish code. If that’s gone, measure a full paver on the long and short edges in millimeters; Cambridge’s standard modular series run in 60mm, 80mm, and 2¼-inch profile thicknesses for floor applications. Photograph the surface and the edge profile. Send both to the supplier and they can match it.
The OEM-versus-aftermarket call for Cambridge is about color and face profile match. A cheap aftermarket paver with a similar gray will sit visibly different under Florida sun once it weathers. Cambridge’s ArmorTec finish has a specific surface texture and color coherence. For a visible paver in a shower or on a bathroom floor, the OEM or a certified Cambridge-matching block is worth the small premium. For a hidden part like the drain flange or the liner, a quality equivalent from a manufacturer like Schluter or Oatey is standard practice and honestly what most installers use.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Bathroom Remodeling Is Failing
- Cracked or missing grout in the shower base. Water gets behind the tile and under the paver, softening the thinset. The underlying cause is usually flex from a subfloor that wasn’t properly backer-boarded.
- Soft spots in the floor when you step in. That’s moisture trapped between the paver and the substrate, and in Homestead it’s the leading cause of substrate rot in bathrooms over ten years old.
- Lifted or hollow-sounding pavers. Tap with a plastic tool handle. A hollow sound means the bond broke. In a wet area, that’s the first silent step before a leak appears at the curb.
- Mildew along the curb and in the floor-to-wall joint. A failing waterproofing membrane behind the paver is feeding moisture to the surface, and the mold returns no matter how often you clean.
- Water staining on the ceiling below the bathroom. That’s a pan liner failure or a compromised drain flange. In Homestead’s slab-on-grade homes, this often appears at the nearest drywall seam in a nearby closet or hallway.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the range for Cambridge Pavers bathroom remodeling in Homestead, broken out by scope:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives the range: square footage, whether the subfloor needs replacement, the paver pattern (herringbone costs more in labor than straight-set), and whether the plumbing is being relocated. We write a flat price with a written scope and a written warranty before any work starts. Every visit includes a documented photo record. Our crew has up to 19 years of experience. The 365-Day Done Right Promise covers the workmanship; if it’s not right, we come back and make it right.
DIY or Call Us?
What you can safely check yourself: tap the pavers for hollow sounds, look for cracked grout lines, and photograph the drain flange area from inside the shower. What you should not tackle: resetting pavers in a wet area, replacing the shower pan liner, or re-sealing a drain flange. Those are plumbing-adjacent, waterproofing-critical jobs. A bad reinstallation of a Cambridge paver over a compromised liner means water trapped behind the wall and rot in the framing. South Florida’s moisture load gives you less margin than most of the country, and a 40-mil liner that’s been stretched or nicked during DIY will pass inspection and fail in two summers. Call us at (844) 834-4248 and we’ll look at it for free.
FAQs

Twelve to twenty years for the tile and paver surface itself, if the underlying membrane holds. The limiting factor is the shower pan liner, not the paver. In Homestead, the high humidity and average summer dew point of 74°F accelerate moisture cycling, and liners above ten years old are the first to fail. Call (844) 834-4248 for a free estimate.
Sometimes yes, if the failure is limited to a few cracked tiles or a section of grout. If the pan liner or drain flange is compromised, spot repair won’t last and full replacement is the honest answer. We’ll tell you which it is after a free evaluation. Call (844) 834-4248.
A shower-only replacement runs 5 to 10 working days. A full bathroom remodel in Homestead runs 2 to 4 weeks, depending on plumbing relocations and substrate conditions. You’ll have a written schedule before we start. Call (844) 834-4248 to schedule.
We work from the original series name and color code, or match by photograph and edge measurement if it’s gone. We carry access to over fifty vetted brands including KraftMaid, Cambria, and Silestone, and Cambridge is part of our standard sourcing. Lead times on discontinued Cambridge colors run 2 to 3 weeks. Call (844) 834-4248 to confirm availability for your color.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












