







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Homestead Owner’s Guide
We handle Oldcastle-compatible kitchen remodeling in Homestead, and the installed price typically lands between $14,000 and $45,000 depending on scope. Small kitchens run $9,000 – $20,000. We don’t promise same-day remodels – a kitchen takes weeks, not hours – but we do put the full written price in front of you before anyone picks up a tool.
Most Homestead homeowners don’t wake up planning a remodel. Something fails first. A cabinet door in a 2016 build sags off its hinge because the particleboard carcass swelled through a wet season. Or a countertop edge chips and the seam underneath turns out to be butted, not bonded. Or a backsplash tile pops loose and the thinset behind it is powdery – a sign the substrate was never primed. Oldcastle kitchen lines show up in a lot of Homestead homes, and when a component reaches the end of its service life, the question becomes: replace the part, or rebuild the room around it? That depends on what failed and how far the damage spread.
Which Oldcastle Models This Applies To

Oldcastle is a large building-products group, and its kitchen lines reach Homestead through several channels – cabinet programs sold to production builders, countertop and surfacing products, and window and door components that show up in kitchen walls and pass-throughs. The label inside a cabinet door, on the back of a drawer box, or on the underside of a countertop overhang is how you identify what you’re actually working with. Grab a photo of that label before you call anyone. The model prefix and series code are what we match against, not a guess from a catalog photo.
Here’s the compatibility gotcha worth knowing: Oldcastle cabinet series that look identical from the front can have different box depths and hinge-bore patterns underneath. A 12-inch-deep wall cabinet from one series won’t accept the door from another, and the hinge cup spacing (typically 35mm in euro-style boxes) varies by line. If you’re replacing a single door or drawer front rather than the whole run, measure the bore center to the door edge to the millimeter. On the OEM-versus-aftermarket decision, we source through more than fifty vetted brands – KraftMaid and Wellborn for cabinets, Cambria and Silestone for counters – and we’ll tell you plainly when an aftermarket equivalent beats chasing a discontinued Oldcastle part and when it doesn’t. Rowan Construction Group Homestead is an independent service provider and is not affiliated with Oldcastle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Doors that won’t stay adjusted. The hinge screws keep backing out no matter how many times you tighten them, which means the screw holes in the carcass have stripped – usually from particleboard that took on moisture. Replacing the hinge won’t fix it; the mounting surface is the problem.
- Swollen or soft cabinet boxes. Press a thumbnail into the bottom panel of a base cabinet near the sink. If it dents easily, the board has absorbed water. In Homestead’s humidity, this happens faster than most owners expect, and a swollen box distorts every door and drawer mounted to it.
- Countertop seams that have opened. A visible hairline at the joint between two slabs means the seam adhesive has failed or the substrate has shifted. Left alone, water works into the gap and the edge chips follow within a season.
- Loose or hollow-sounding backsplash tile. Tap along the wall. A hollow ring means the thinset has debonded from the substrate, often because the drywall or cement board behind it wasn’t primed or was installed over moisture.
- Drawers that rack and bind. The drawer slides are worn, or the box is out of square because the cabinet has settled. If a drawer binds on one side only, the cabinet frame has moved, not the slide.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Every number below is the installed range for Homestead – labor, materials, and disposal included, with a written line-item quote before work begins.
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: whether the cabinet boxes are sound enough to keep, whether the countertop substrate needs replacing, and whether the layout changes (which triggers plumbing and electrical work). Under Clause 1 of the Haven Standard, the price is written before anyone starts – a flat number with a written scope and written warranty. No work proceeds on a change until the change order is signed. The 365-Day Done Right Promise covers the work: if it isn’t done right, we make it right. And every visit includes a documented photo record as a standard deliverable, so you see what we found behind the wall.
DIY or Call Us?
You can safely check a few things yourself. Photograph the cabinet labels. Measure hinge-bore spacing. Tap the backsplash for hollow spots. Note where the counter seam sits. That information saves time on the phone and helps us quote accurately.
Where DIY goes wrong: cabinet replacement and countertop installation look like assembly work but aren’t. A base cabinet that isn’t shimmed and leveled to the floor turns every door and drawer into a problem, and a stone counter set on an uneven box will crack within months. If the kitchen involves moving a gas line for a range or running new electrical for a dishwasher or disposal, stop – those are jobs for a licensed trade, and getting them wrong is a genuine hazard, not a frustrating afternoon. We pull the permits and pass the inspections. Call (844) 834-4248 to schedule your free estimate, and bring a competitor’s quote if you have one – our Free Second Opinion reviews it line by line at no charge.
FAQs

How long do Oldcastle kitchen components last in Homestead? Cabinet boxes in a well-ventilated kitchen typically hold up 15 to 20 years, but in Homestead’s humidity and with a sink or dishwasher nearby, moisture-related failures show up closer to 8 to 12 years. Countertop seams and backsplash adhesion are the first things we see go.
Can the part be repaired instead of replaced? Sometimes. A single hinge or drawer slide is repairable if the cabinet box behind it is solid. Once the board has swollen or the thinset has debonded from the substrate, repair is a patch over a failing surface, and it won’t hold through another wet season. We’ll tell you which one you have after we look.
How long does the work take? A single cabinet replacement or countertop swap runs a day or two. A full kitchen remodel in Homestead runs several weeks, and we give you the schedule in writing with the quote so there’s no guessing. Call (844) 834-4248 for an exact timeline and price – estimates are free.
How do you source the part? We match your Oldcastle label and measurements against our vetted supplier network, which covers more than fifty brands including KraftMaid, Cambria, and Silestone for compatible replacements. If an OEM part is discontinued, we tell you upfront and present the aftermarket equivalent with its spec sheet before you commit. Nobody touches a thing until the change order is signed.
Call (844) 834-4248 for a free estimate. We’ll give you a written price before any work starts, a scope you can read, and a photo record when the crew leaves. That’s the whole offer – a number in writing, and a Homestead kitchen that holds up.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












