







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Bathroom Remodeling: The Homestead Owner’s Guide
We install Oldcastle-compatible bathroom remodeling in Homestead, and a full bathroom remodel here typically runs $9,000 to $28,000 installed, with a written flat price before any work starts. Smaller bathrooms land between $5,000 and $12,000. Oldcastle products show up most often as masonry and hardscape elements around the bath footprint – block piers, sill and threshold stock, and the structural masonry behind a tile shower – so when an Oldcastle element is involved, we’re usually dealing with the substrate under the finish, not a bolt-on part you can swap at the vanity.
Owners in Homestead usually discover the problem the same way: a hairline crack spiders across the threshold, grout keeps failing at the base of the shower pan, or a remodel quote stalls because the existing wall assembly doesn’t meet Florida’s wind-load requirements and needs masonry work before tile goes back on. We’re an independent contractor, not affiliated with Oldcastle, and we quote the repair or the full remodel with the masonry scope written out line by line.
Key Takeaways
- Oldcastle bathroom elements in Homestead are typically masonry and hardscape components, not replaceable fixtures.
- Full bathroom remodel: $9,000-$28,000 installed; small bathroom remodel: $5,000-$12,000.
- Walk-in shower installation runs $4,500-$12,000; tub-to-shower conversion $3,500-$10,000.
- Every quote is a flat written price with a written scope before work begins.
- No change proceeds without a signed change order, which is how projects finish within a few percent of the agreed number.
Which Oldcastle Models This Applies To

“Oldcastle” isn’t a single product line – it’s a family of masonry, hardscape and structural products, and the bathroom-relevant pieces show up in a few recognizable places. The most common in Homestead are the concrete block and structural masonry used behind tile in older showers and around tub alcoves, the precast sill and threshold stock at exterior bathroom doors, and hardscape pavers or step units at a bathroom’s exterior entry or pool-bath connection.
To identify what you have, look for the block’s nominal dimensions stamped or cast on the unit (8x8x16 is the standard concrete masonry unit in our area), the paver thickness, and any manufacturer marking on the underside of a threshold or sill. Photos of the exposed fault and a tape measure across the joint tell us more than any model number you can dig up.
The OEM-versus-aftermarket decision works differently here than it does for a door hinge. Oldcastle block and masonry are commodity dimensions – a 8x8x16 unit is a 8x8x16 unit – so an equivalent masonry product from another reputable supplier performs the same, provided the compressive strength and the Florida Product Approval documentation match what the wall assembly needs. Where we don’t substitute is structural: if the original assembly was engineered and permitted to a specific product, we document that and match it rather than swap to save a few dollars. What we never do is claim to be a stocking Oldcastle dealer or to carry Oldcastle parts on a truck. We source what the job needs, and the written quote tells you exactly what’s going in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Bathroom Remodeling Is Failing
The failure modes for Oldcastle masonry elements in a Homestead bathroom are specific and predictable. Here’s what to look for and what each symptom actually means.
- Repeating hairline cracks in tile or grout at the shower base or threshold. The masonry substrate underneath is moving, usually because it wasn’t tied or grouted to spec, or water has been infiltrating and softening the bed. Tile cracks are a symptom; the block joint is the cause.
- Efflorescence – a white, chalky bloom on block, grout or paver faces. That’s mineral salt pushed to the surface as moisture moves through the masonry. In Homestead’s humidity and afternoon rain, it points to a water path that needs finding, not just cleaning.
- Rust stains at anchor points or door thresholds. Embedded steel or fastener heads are corroding because they’re wetted and not isolated from the masonry. It shortens the life of the surrounding block and the finish above it.
- Spalling – the face of a block or paver flaking or popping off. Freeze-thaw isn’t our problem here; salt air and driven rain are. Spalling means the surface is saturated and the unit’s integrity is compromised.
- Soft or hollow-sounding grout joints and a spongy floor near the shower. This is the one that matters most: a soft substrate means water has been getting in for a while, and the fix is a moisture-path inspection, not a cosmetic regrout.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For this category in Homestead, the installed price ranges below are what we write on the quote. These are flat prices with the scope spelled out – not hourly, not “call for a price.”
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: what the substrate looks like once we open it up, whether the wall assembly needs to meet current wind-load requirements, the tile and fixture selections, and whether structural masonry has to be rebuilt. Masonry scope can swing a job by several thousand dollars, and we tell you that up front rather than after the demolition. The written quote itemizes labor and materials so you can see where the money goes, and it carries a written warranty backed by the 365-Day Done Right Promise – if it isn’t done right, we make it right.
DIY or Call Us?
You can safely check things that don’t require opening a wall or touching structural masonry: photograph the crack, note where water appears after a storm, check the caulk and grout lines with a fingernail, and measure the damaged area. That information helps us scope the job accurately.
What you should not do yourself is rebuild a masonry substrate, re-anchor a shower assembly, or redo a waterproofing assembly behind tile. Setting block, tying it to an existing wall, and getting the waterproofing right so it holds in Homestead’s rain and humidity is where DIY jobs fail – and a failed waterproofing layer behind finished tile means tearing out the tile to fix it. The cost of the call is nothing; the cost of a failed redo is the whole finished wall.
Call (844) 834-4248 to schedule a free estimate. We’ll come out, document what we find with photos, and put a flat written price in front of you before anyone picks up a tool.
FAQs

Properly installed concrete block and quality pavers last decades, but in Homestead’s salt air and driven-rain climate the waterproofing and flashing that protect the masonry matter more than the unit itself. Failures we see are almost always water-management failures, not product failures. Call (844) 834-4248 for a moisture-path inspection – estimates are free.
Sometimes yes, and we’ll tell you honestly when a repair is the right call. Cracked grout or localized spalling can often be repaired; a soft substrate or a failed waterproofing layer usually means replacement. Our free second opinion on any written estimate lets you bring another quote and compare line by line. Call (844) 834-4248.
A targeted masonry or shower-assembly repair often takes one to three days, while a full bathroom remodel runs one to three weeks depending on tile and fixture lead times. We give you the timeline in the written scope so you know what to plan around. Call (844) 834-4248 for an exact schedule and quote.
We source to the specification the job requires – matching dimensions, compressive strength and the Florida Product Approval documentation the assembly needs – from reputable suppliers, and the written quote names what’s going in. We don’t claim to stock Oldcastle parts or carry them on a truck. We also handle KraftMaid, Cambria and Silestone selections when those come into a bathroom remodel. Call (844) 834-4248 for your free estimate.
When an Oldcastle element in your Homestead bathroom is failing, the useful next step is knowing exactly what’s behind it and what it costs to fix. We put the number in writing before anyone starts, document the condition with photos so you can see what we found, and stand behind the work with the 365-Day Done Right Promise and a written warranty. Call (844) 834-4248 to schedule your free estimate with Rowan Construction Group Homestead.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












