







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Homestead Owner’s Guide
We handle Dvele kitchen remodeling in Homestead with a written price before anything is ordered or cut: kitchen remodels generally run $14,000 – $45,000 installed, with smaller scope work in the $9,000 – $20,000 range. Because these are planned builds, not emergency calls, we schedule a free estimate within days rather than promising same-day work. Most Homestead owners start noticing trouble with a Dvele kitchen the same way: a cabinet face that no longer sits flush, a drawer that catches halfway, a countertop seam that has gone dark, or a soft spot in the subfloor near the sink that shows up months after the last coat of paint looked fine.
Call (844) 834-4248 to schedule your free estimate. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Dvele.
Key Takeaways
- A Dvele kitchen remodel in Homestead typically prices at $14,000 – $45,000 installed, quoted flat and in writing before work starts.
- Dvele cabinetry is factory-built and modular, so replacement parts and panel sizes must be matched to the model plate, not guessed from a photo.
- Homestead’s humidity and salt-laden coastal air accelerate the failures that matter most here: moisture-swollen box edges, failed caulk lines, and drawer hardware that corrodes before it wears out.
- You get a documented photo record of what we found on every visit, and no change proceeds without a signed change order.
Which Dvele Models This Applies To

Dvele builds modular and panelized homes around a fixed fabrication system, which is the good news and the tricky part at once. The kitchen casework that ships with a Dvele home is built to a consistent set of box dimensions and finish standards, but those specs vary by model line and by the year the modules were fabricated. Before we quote a single part, we locate the model identification plate, usually inside a base cabinet or on the inside of a cabinet door, and read the cabinet width, depth, and door finish code off it. A measuring tape alone won’t settle it, because a 24-inch box from one Dvele series doesn’t share hinge boring or drawer-slide pattern with a 24-inch box from another.
On the OEM-versus-aftermarket question, we’re direct: for doors, drawer fronts, and finished end panels, matching the original Dvele finish and profile is almost always the right call, since a mixed finish reads as a repair rather than a remodel. For hinges, slides, and shelf hardware, a quality aftermarket equivalent from a known maker performs to the same standard and often outlasts the original. We also work with KraftMaid, Cambria, and Silestone when the right move is replacing a whole run rather than a single part. Under Clause 1 of the Haven Standard, the price is written before anyone starts, so you’ll see the OEM and aftermarket options side by side, with the numbers, before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
These are the failures we actually find in Homestead kitchens, and what’s behind each one.
- A drawer or door that no longer closes flush. Usually a slide that has lost its alignment or a hinge plate pulled loose from the box. In humid months, particleboard box edges swell and the screw holes enlarge, which is why tightening the same screw only holds for a few weeks.
- Dark or lifting countertop seams. The seam adhesive has failed and moisture is getting under the edge. In Homestead’s climate that dark line is often the first visible sign, and it spreads along the seam within a season.
- Soft or springy floor near the sink or dishwasher. Water has reached the subfloor, most often from a slow supply-line weep or a failed caulk joint. This one matters because the cabinet box above it is usually compromised too.
- Caulk lines gone black or peeling at the backsplash. Standard kitchen caulk breaks down fast in high humidity and coastal air. It’s a small fix if caught early and a mold problem behind the backsplash if it isn’t.
- Corrosion on drawer slides and hinges. Salt in the air along the Homestead corridor eats cheap-steel hardware well before its rated cycle life. Look for a chalky white bloom or a gritty feel when the drawer moves.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the work prices in Homestead, by line item. Every one of these is a written flat price with a written scope before work begins.
| Work | Installed range |
|---|---|
| Full kitchen remodel (Dvele-compatible) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: whether we’re matching a single Dvele door finish or replacing a full run of casework, countertop material and edge profile, whether the subfloor needs repair, and whether the existing layout stays put. We price parts and labor as separate lines so you can see exactly what the hardware costs against what the install costs. A written warranty covers the work, and the 365-Day Done Right Promise means if it isn’t done right, we make it right. Bring a competitor’s estimate and we’ll review it line by line at no charge.
DIY or Call Us?
Some checks are safe and sensible for any owner to do. Open a few drawers and doors and note where they rub or sag. Look along the countertop seam for a dark line. Press the floor near the sink for softness. Take a photo of the model plate inside the cabinet. Those four things tell you a lot and cost nothing.
Where DIY goes wrong with Dvele kitchens is the part that needs a trained hand: swapping a cabinet box, resetting a countertop seam, or pulling a run of casework usually means disconnecting plumbing and sometimes dealing with wiring for a dishwasher or disposal. That’s electrical and water work behind finished surfaces, and getting it wrong damages the cabinet you’re trying to save. Our technicians have up to 19 years of experience, are background-checked and uniformed, and every visit includes a documented photo record. Call (844) 834-4248 to schedule your free estimate.
FAQs

Cabinet hardware typically lasts 8 – 12 years in coastal Florida air before corrosion forces replacement, while a properly installed countertop and backsplash last 15 years or more. The short-lived parts are the caulk lines and the slides, not the cabinet box itself. Call (844) 834-4248 for an exact quote; estimates are free.
Often yes, if the cabinet box and finish are intact. Loose hinges, misaligned slides, failed caulk, and a lifting countertop seam can usually be repaired rather than replaced, which keeps the cost down. We’ll tell you plainly when a repair will hold and when it won’t. Call (844) 834-4248 for a free second opinion on the options.
A single-door or drawer-front replacement is typically a short, one-visit job, while a full cabinet run with countertop runs one to three weeks. The schedule depends on whether parts must be ordered to match the model’s finish. We give you a written timeline with the price. Call (844) 834-4248 to schedule your free estimate.
By reading the model identification plate and matching the exact cabinet dimensions, hinge boring pattern, and finish code rather than guessing from a photo. For hardware, we use a quality aftermarket equivalent when it performs to the same standard; for finished panels and doors, we match the original Dvele finish and profile. Call (844) 834-4248 for an exact quote; estimates are free.
Whether you’re facing a single sagging drawer or planning a full Dvele-compatible kitchen remodel, the first step is the same: a written price you can hold us to. Call (844) 834-4248 to schedule your free estimate in Homestead. We’ll show you the documented photo record from the visit, put the parts and labor in writing, and get a live person on the line whenever you call.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












