







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Homestead Owner’s Guide
We install Mighty Buildings-compatible driveway and paver assemblies across Homestead, and typical installed pricing runs $7,000 – $18,000 for a full paver driveway, or $4,500 – $12,000 for concrete. A single failed panel or settled apron repair is usually far less. Small scoped paver work we can often complete in one visit; full replacements get a written estimate and a scheduled start date, never a same-day promise. Rowan Construction Group Homestead is an independent installer and is not affiliated with Mighty Buildings.
Most Homestead owners don’t find out something failed until it announces itself. A paver lifts at the garage transition after a wet season. A control joint walks apart an inch and a half. Efflorescence blooms white across the surface and won’t rinse off. The driveway is the one part of a prefab home that takes every bit of South Florida’s rain, sun and root pressure, and it fails on its own schedule, not your renovation timeline.
Which Mighty Buildings Models This Applies To

Mighty Buildings builds panelized, factory-finished units, and the driveway and hardscape scope attached to those homes follows the site plan, not a single universal part number. That’s the first compatibility gotcha: the paver or slab spec is set by the site plan and the local frost-line and drainage requirement, not stamped on a box. Two homes from the same series can carry different paver thicknesses because one sits on higher finished grade.
To identify what you actually have, check three things before ordering anything:
- The site plan / hardscape drawing in your closing packet – it names the paver type (typically 60mm or 80mm structural pavers), the base depth and the drainage direction.
- A pulled paver and a tape measure – measure length, width and thickness in millimeters; a 60mm unit against an 80mm base is where replacements go wrong.
- The joint sand and edge restraint – polymeric vs. standard sand and the restraint profile determine whether a spot repair holds.
On the OEM-vs-aftermarket decision: for structural pavers, a quality aftermarket equivalent from a vetted line (we source Belgard and Techo-Bloc, and for interior-adjacent specs KraftMaid, Cambria and Silestone on the cabinetry and countertop side) will match or beat the OEM unit on freeze-thaw and abrasion ratings. For color-matched or proprietary profiles, source the OEM to avoid a visible patch. Bring us the site plan and we’ll tell you which path the numbers favor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Pavers lifting or rocking at the apron. Water is getting under the base at the garage transition; a settled sub-base or a failed edge restraint lets each rain event pump the soil out from beneath.
- Widening control joints or slab cracks over 1/8 inch. The concrete is moving because the base wasn’t compacted to spec or tree roots are heaving it; crack width tells you which.
- White efflorescence that won’t rinse away. Soluble salts are wicking up through the slab or paver base, which means moisture is trapped underneath.
- Standing water for more than 24 hours after rain. The drainage slope has fallen below the 1% minimum, pooling water that slowly undermines the base.
- Sunken or heaving sections near palms and ficus. South Florida root systems spread wide and lift hardscape; this is a base-and-root problem, not a surface one.
Each of these is a symptom, not the diagnosis. We measure the base, check the slope and photograph the condition so you’re deciding on evidence, not a guess.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the Homestead installed ranges, kept consistent with our published numbers so you can screenshot and compare:
| Scope | Installed Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What moves the number: square footage, base depth (a failed base costs more than a failed surface), paver thickness and line, edge restraint, and drainage correction. Every Rowan quote is a flat written price with a written scope, delivered before any work starts. If a hidden base problem surfaces once we open the driveway, no work proceeds on the change until you sign a change order – which is why our projects finish within a few percent of the agreed price. The work carries our 365-Day Done Right Promise and a written workmanship warranty.
DIY or Call Us?
An owner can safely check a few things: photograph the failing area, measure the crack or lift height, confirm the drainage direction, and pull one loose paver to measure thickness. That’s diagnostics, and it helps.
What goes wrong with DIY on hardscape is the base and the slope. Laying pavers on a hand-tamped base looks fine for a season, then the first heavy Homestead rain reveals it. Resetting a slab without correcting drainage just moves the pooling. And lifting settled concrete or cutting out a root-heaved section is heavy, unforgiving work with real injury risk – a slab section weighs far more than it looks. If the surface is failing, we’d rather run the numbers with you than have you redo it twice. Call (844) 834-4248 and we’ll set up a free estimate.
FAQs

A properly based paver driveway typically holds 20 – 30 years and a concrete slab 25 – 30 years in South Florida conditions. Homestead’s heavy summer rain and high water table shorten that when drainage is off or the base wasn’t compacted to spec – moisture under the surface is the real enemy, not sun.
Often yes. A localized failed section, a settled apron or a single lifted paver run can be repaired by matching the paver and rebuilding the base under that area. We tell you honestly when a repair will hold and when the whole surface has failed – a repair on a bad base just moves the problem.
A spot repair or apron rebuild is usually one visit. A full paver driveway replacement typically runs three to six working days depending on square footage, base correction and weather, and we give you the schedule in writing. We don’t promise same-day on a full replacement – that would be a false claim on work of this scope.
We start from your site plan and a measured sample: paver dimensions in millimeters, thickness, joint sand and edge restraint. Then we match to a vetted line (Belgard or Techo-Bloc for pavers) or source the OEM where color-match matters. You get the spec and the flat price in writing before anything is ordered or lifted.
Call (844) 834-4248 for an exact quote – estimates are free, and a live person answers around the clock.
Ready to stop guessing and get a written number? Call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate. We’ll bring the site plan questions, measure the base, photograph what we find, and hand you a flat written price before any work starts – backed by our 365-Day Done Right Promise and a Free Second Opinion on any written estimate you already have. Our technicians bring up to 19 years of experience, and every crew is background-checked, uniformed and documented on every visit.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












