







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose Mr-Glass Construction
Rowan Construction Group Homestead provides independent service, repair, and installation for Mr-Glass windows, sliding glass doors, and frameless shower enclosures throughout Homestead. We’re not affiliated with or authorized by Mr-Glass, and we don’t pretend to be. What we do bring is a crew that knows these systems well, a written flat price before any work starts, and a documented photo record of every visit.
Mr-Glass itself is a South Florida brand, engineered around the wind-load and salt-air demands of Miami-Dade and Broward. That matters here. Homestead sits in the part of Miami-Dade where post-Hurricane Andrew building code rewrote how every window and door gets anchored, sealed, and rated for wind. The installs that hold up are the ones detailed for this market, not the ones pulled off a template from somewhere else. Call (844) 834-4248 and we’ll give you a written scope before anything gets touched.
Why Trust Rowan Construction Group Homestead for Your Mr-Glass Construction?

Our technicians have up to 19 years of experience, and the ones who work on Mr-Glass units spend that time on the specifics: the Series 5000 impact sliding door, the Estate series single-hung, the frameless enclosure systems, and the laminated impact picture and awning units. These are systems with particular frame profiles and anchoring requirements, and the crews who work on them regularly are faster and more accurate than the ones meeting them for the first time.
We’re committed to using OEM-compatible parts wherever the unit’s series still supports them. That means replacing rollers, weatherstripping, screens, and glazing with parts matched to the original spec rather than whatever fits the opening loosely. When OEM parts aren’t available, we specify equal-or-better laminated impact glass with a matching wind-load rating. It’s a standard we hold because the alternative, mixing ratings across a home’s openings, can quietly undercut the wind mitigation insurance credits so many Homestead homes rely on.
Everything we do is warranty-safe. We don’t do anything that voids a manufacturer’s warranty, and we document every step of the work so you have a record. That’s the Haven Standard, the internal system we operate under: a written flat price before work begins, a signed change order for any scope change, and a 365-Day Done Right Promise. If it’s not done right, we make it right. Under Clause 1, the price is on paper first, every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Homestead
Homestead’s subtropical sun, salt-laden air, and June-through-November storm season put real stress on these systems. Here’s what we see most often:
- Failed perimeter sealant at the frame-to-wall joint. Years of UV and salt air break down silicone, and the first sign is water intrusion during driving rain. The seal, not the glass, is usually the culprit. A UV-rated sealant rated for the coastal exposure fixes most of these.
- Worn rollers and tracks on impact sliding glass doors. A Series 5000 or similar unit that once glided now tracks hard, sags, or jumps screens off the rail. Rollers are a wear item, and after a decade or more of use they’re the honest explanation for most of it.
- Discoloration, bubbling, or edge delamination on older laminated impact units. Prolonged sun exposure degrades the interlayer on Estate series and older laminated glazing. Once the edge delaminates, the pane’s integrity is compromised and a patch won’t restore it.
- Corroded or loose anchor fasteners and oxidized frames. Coastal fasteners corrode, and frames oxidize. That leads to panels that rattle and, more seriously, to compromised wind-load attachment. In a Homestead wind zone, this is the one that needs professional eyes first.
- Weatherstripping that’s dried and flattened. Seals that once blocked wind-driven rain let it in. Replacing the gaskets and weatherstripping is a small, real fix, provided the frame and interlayer still hold.
A typical Mr-Glass call starts with water staining at an interior sill or a sliding door that no longer glides after a decade of sun. The usual cause is a dried-out sealant joint and worn rollers, not a failed pane. A qualified local pro pulls the panel, inspects the interlayer and frame anchors, replaces the rollers and gaskets with OEM-spec parts, and re-seals with UV-rated sealant. If the laminated glass shows edge delamination or the frame no longer holds its fasteners, the recommendation shifts to replacement rather than another patch.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We use Mr-Glass OEM replacement rollers, weatherstripping, screens, and glazing wherever a unit’s series is still supported, and specify equal-or-better laminated impact glass with matching wind-load ratings when OEM is unavailable. We don’t stock parts locally. Each job is scoped and sourced to the specific unit and series.
The repair-or-replace call comes down to what’s actually failing. Sealant and hardware failures are almost always a repair. Delaminated interlayers, cracked laminated panes, or corroded frames that no longer hold anchors usually justify full unit replacement. We tell you which side of that line your unit falls on and why, in plain terms, before any money is spent.
If you’ve gathered a written estimate from someone else, we’ll review it line by line at no charge. That’s a standing offer, and it’s free. Call (844) 834-4248 and we’ll schedule it.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the interlayer, frame anchors, sealant joints, and rollers on the specific Mr-Glass unit, then write down what we found. Not what we felt about it.
- 2
Written scope and price. Before any work starts, you get a flat written price and a written scope. If anything changes, no work proceeds until the change order is signed.
- 3
Repair or install. OEM-spec parts, sealants rated for the exposure, and anchoring detailed for Homestead’s wind zone. We pull permits for window replacement where required.
- 4
Test. We check glide, seal, and anchorage, and confirm the assembly meets the wind-load rating it was specified for.
- 5
Warranty and record. You get a written warranty and a documented photo record of what was found and what was done. Every visit, as standard. That’s the 365-Day Done Right Promise behind it.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Homestead
We work on the Mr-Glass product families that come up most in this market: the Series 5000 impact sliding glass door, the Estate series impact single-hung window, laminated impact picture and awning window units, and the brand’s frameless glass shower enclosure systems. We handle service and repair on existing units as well as new installation and window replacement. Impact window installation is one of our core sub-services, along with frameless shower enclosures, both of which get the same written scope and documented photo record every job gets.
We Also Service These Brands
We’re a multi-brand operation, not single-brand dependent. Alongside Mr-Glass work we handle KraftMaid and other cabinetry lines, Cambria and Silestone countertops, and Kohler fixtures across our seven residential trades. If your project touches several of these, one written scope can cover the whole thing rather than a chain of separate contractors and separate numbers.
FAQs – Mr-Glass Construction Service in Homestead

No. We are an independent service provider and are not authorized, sponsored, or warranty-endorsed by Mr-Glass. We work on Mr-Glass products as an independent contractor and scope every job around what the product actually requires.
Yes, wherever the unit’s series is still supported we use OEM replacement rollers, weatherstripping, screens, and glazing. When OEM parts aren’t available, we specify equal-or-better laminated impact glass with matching wind-load ratings and tell you exactly what we’re using.
Sealant and roller repairs are usually done in a single visit. Window and door replacement takes longer and depends on the number of openings and permit timelines. We give you the expected timeline in the written scope before work starts. Call (844) 834-4248 to schedule your free estimate.
We service the Series 5000 impact sliding glass door, the Estate series impact single-hung window, laminated impact picture and awning units, and frameless glass shower enclosure systems.
Not when the work is done correctly. We follow warranty-safe practices and use matched parts so the manufacturer’s warranty stays intact, and we document the work so you have a record. Call (844) 834-4248 for a free estimate.
Impact window installation runs $8000 – $25000, window replacement $4500 – $15000, walk-in shower installation $4500 – $12000, and shower replacement $3000 – $8500. Call (844) 834-4248 for an exact quote. Estimates are free and written before any work begins.
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
Book Your Mr-Glass Service in Homestead, FL
Whether it’s a Series 5000 door that won’t glide, an Estate window leaking at the sill, or a frameless enclosure you want installed, we’ll give you a written price and scope before any work starts. Call (844) 834-4248 today for your free estimate. Calls are answered by a live person around the clock.
Written by the team at Rowan Construction Group Homestead.












