







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose Therma-Tru Construction
Rowan Construction Group Homestead provides independent Therma-Tru construction, repair, and installation service across Homestead, FL – we’re a local contractor who works on Therma-Tru door systems regularly, not a Therma-Tru dealer or factory-authorized shop. What separates our Therma-Tru work is diagnosis: we identify why a Fiber-Classic slab cracked, why a Smooth-Star entry sticks in July, or why a Classic-Craft finish is peeling, and we fix the cause instead of selling a replacement door that will fail the same way. Therma-Tru builds strong fiberglass and steel entry systems, and in Homestead’s sun, salt air, and storm-driven rain they age in predictable ways. Call (844) 834-4248 and we’ll put a written price in front of you before any work starts.
Why Trust Rowan Construction Group Homestead for Your Therma-Tru Construction?

Our technicians have up to 19 years of experience, and that time shows up in how they read a door. They know the difference between a Fiber-Classic skin crack that’s cosmetic and one that has reached the composite core. They can tell a Smooth-Star slab that’s binding on a swollen jamb from one that has actually warped. That matters in Homestead, where the wrong call costs you a door you didn’t need to replace.
We source OEM-compatible Therma-Tru parts – hinges, adjustable sills, sweeps, weatherstrip kits – because the seal on a Therma-Tru door is an engineered system, and generic hardware flattens the performance the door was built for. On warranty: Therma-Tru’s coverage protects against manufacturer defects, and improper installation or aftermarket parts can complicate a claim. We work in ways that keep your existing coverage intact and tell you plainly when a repair would put it at risk.
Every visit includes a documented photo record of what we found and what we did. Every quote is a flat written price with a written scope. Under Clause 1 of The Haven Standard, no work starts until the price is written and agreed – and no change proceeds without a signed change order. If you have a competitor’s estimate, bring it in. Our Free Second Opinion reviews it line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Homestead
Homestead sits in one of the harshest exterior environments in the continental U.S. Intense UV, high humidity, salt-laden air from Biscayne Bay minutes away, and a June-to-November storm season that drives rain sideways into every threshold. Therma-Tru doors handle that well when they’re sound, but the failures below are the ones we see most on Homestead entries.
- Hairline cracks and “star” fractures around hinges and locksets on Fiber-Classic and Smooth-Star slabs. These come from repeated slam impact plus thermal movement – the door expands in afternoon heat and contracts at night, and over years the stress concentrates at the fastener points. A single crack near a hinge is often repairable; a cluster radiating from a lockset usually means the slab is done.
- Warping at the top and bottom rails on west- and south-facing entries. When the factory edge seal is compromised, humid air enters the composite core. West- and south-facing doors in Homestead take the worst of the afternoon sun, and a bowed top rail lets in daylight and water. It’s one of the most common Therma-Tru failures we correct on this side of Miami-Dade.
- Chalking and peeling factory paint or stain on sun-exposed faces. Darker-colored Classic-Craft doors absorb more heat, and their finishes break down faster in Homestead’s UV load than lighter doors on the same elevation. It’s not a defect. It’s a maintenance reality that most manufacturer pages don’t spell out.
- Flattened and torn weatherstrip and sweep seals. A failed sweep lets wind-driven rain past the threshold, and in a Homestead summer storm that shows up as a wet foyer within minutes. On Pulse door systems, the adjustable sill can also seize from grit and salt, or lose its seal altogether, letting water track under the door.
- Corroded hinges and fasteners from salt air. Biscayne Bay is close enough that coastal corrosion reaches exterior hardware on most Homestead entries. When a hinge fails, the door drops, binds, and starts damaging the frame.
Therma-Tru Parts & Our Repair-vs-Replace Approach

OEM Therma-Tru replacement hinges, sills, sweeps, and weatherstrip kits cost a little more than generic hardware, and they’re worth it whenever the slab and frame are sound. They restore the seal the door was engineered for and keep your warranty picture clean. We source parts per job rather than carrying local stock, and we tell you what we’re ordering and why before we order it.
The repair-or-replace call comes down to the slab. If it’s warped, cracked through, or delaminated, replacing the slab in the existing frame is usually more honest than patching a door that will fail again next summer. Full replacement only makes sense when the frame or rough opening has failed too.
Call (844) 834-4248 for a written price before any work starts – estimates are free, and so is a second opinion on a competitor’s quote.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab for warp and skin cracks, test the hinges and lockset alignment, inspect the sweep, weatherstrip, and sill, and photograph everything. We tell you what we found in plain terms.
- 2
Written scope and price. You get a flat written price and scope before a tool is picked up. Any change gets a signed change order first.
- 3
Repair or install. OEM-compatible Therma-Tru parts, slab re-hang or replacement in-frame, finish work matched to the existing door. On installation, we set the door square and seal the rough opening properly for Homestead wind-driven rain.
- 4
Test. We confirm the door closes squarely, the sweep and weatherstrip seal, the lockset engages cleanly, and there’s no daylight or water path. You get a documented photo record of the finished job.
- 5
Warranty. You leave with a written workmanship warranty and the 365-Day Done Right Promise behind it.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Homestead
We work on entry and patio door systems across the Therma-Tru line: the Fiber-Classic collection, Smooth-Star fiberglass doors, the Classic-Craft series, and Pulse door systems. That covers slabs, frames, sills, sweeps, weatherstrip, hinges, and finish work. We also handle the adjacent trades that often come up around a door replacement – Window Replacement, Full Bathroom Remodeling, and Roof Repair among them. Whether your Therma-Tru door needs a new sweep or a full system replacement, we’ll tell you which it is.
We Also Service These Brands
Therma-Tru is one of the brands we know well, but it isn’t the only one we work with. We also install and service KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures, among other vetted product lines. That multi-brand depth means honest recommendations based on your home, not a single-manufacturer agenda.
FAQs – Therma-Tru Construction Service in Homestead

Is Rowan Construction Group Homestead authorized by Therma-Tru? No. We are an independent Therma-Tru service provider, not a Therma-Tru dealer, distributor, or factory-authorized shop, and we’re not affiliated with the manufacturer. We service and install Therma-Tru doors as a local contractor, and all manufacturer warranty questions go to Therma-Tru directly.
Do you use genuine Therma-Tru or OEM parts? Yes, we use genuine Therma-Tru or OEM-compatible replacement parts whenever they’re available and the door calls for them – hinges, sills, sweeps, weatherstrip kits. We’ll tell you when an aftermarket option is acceptable and when it isn’t, and we won’t put a generic part on a door that needs the engineered one.
How long does Therma-Tru service take? A weatherstrip, sweep, or sill replacement is typically a half-day job. Re-hanging or replacing a slab in the existing frame usually takes a full day once the parts arrive. Full door-system replacement depends on the rough opening and any rot or water intrusion we find. Call (844) 834-4248 and we’ll give you a realistic timeline with your written price.
What Therma-Tru models and series do you cover? Fiber-Classic collection entry doors, Smooth-Star fiberglass doors, the Classic-Craft series, and Pulse door systems. If you’re unsure which series you have, send us a photo of the door edge and the hinge side – the sill and sweep geometry usually makes it clear.
Will service void my Therma-Tru warranty? Therma-Tru’s warranty covers manufacturer defects, and improper installation or unapproved parts can affect a claim. We work in warranty-safe ways and tell you honestly when a proposed repair would put your coverage at risk. Call (844) 834-4248 if you’d like us to review your warranty situation before we start.
How much does Therma-Tru construction cost in Homestead? Door service and related exterior work in Homestead typically runs in the ranges below. Call (844) 834-4248 for an exact quote – estimates are free, and your written price comes before any work starts.
| Service | Typical Range in Homestead |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
Book Your Therma-Tru Service in Homestead, FL
If your Therma-Tru entry is letting in daylight, sticking, or showing cracks, don’t guess at the cause. Call (844) 834-4248 for a free estimate and a written price before any work starts. We’ll tell you what we found, what it will cost, and whether the door needs a repair or a replacement – and you’ll have the photo record to prove it.
Written by the team at Rowan Construction Group Homestead.












