







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose ViewLux Construction
We provide independent ViewLux construction service in Homestead, focused on the cabinet and millwork work this brand actually needs: door and drawer replacement, box repair, hardware upgrades, refacing, and full kitchen rebuilds around ViewLux boxes. What sets our ViewLux work apart is that we treat the cabinet carcass and the countertop load path as the real job, not the finish. Rowan Construction Group Homestead is an independent service provider and is not affiliated with, authorized by, or endorsed by ViewLux. We work on the brand every week and know where it holds up and where it doesn’t. Call (844) 834-4248 for a free written estimate.
Why Trust Rowan Construction Group Homestead for Your ViewLux Construction?

Our technicians have up to 19 years of experience, and a good share of that time has been spent inside ViewLux cabinets rather than reading about them. We know the all-plywood Shaker base and wall line with its MDF door fronts, the raised-panel oak line, the Ready-to-Assemble series, and the bathroom vanity cabinets by how they behave after two or three Miami-Dade summers. That matters more than any spec sheet.
We read the ViewLux installation specs before a single cabinet comes off the wall, and we plan hardware and trim compatibility from the start so replacements match the existing run. Where the finish and dimensions have to line up exactly, we source ViewLux-compatible OEM doors, drawer fronts, and hinges. Where the original hardware is the weak link, we move to quality aftermarket soft-close hinges and full-extension glides and say so plainly.
Every visit comes with a documented photo record, and every project starts with a flat written price and written scope before work begins. No change proceeds without a signed change order. That is the discipline behind our 365-Day Done Right Promise: if it isn’t done right, we make it right. Homestead homeowners get the number in writing first, then the crew.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in Homestead
- MDF door and drawer faces swelling at the edges. ViewLux’s MDF-core cabinet lines take on humidity fast, especially in Florida kitchens and garages. The face swells at the bottom edge and the thermofoil or painted finish starts to delaminate, usually worst near the dishwasher and sink where steam and splashes land.
- RTA particleboard and MDF boxes sagging under stone. ViewLux Ready-to-Assemble units will bow under a slab of granite or quartz if the box isn’t shimmed and blocked correctly along its full depth. The sag shows up as a countertop that rocks and doors that drag at the top corner.
- Worn hinges and drawer glides. The standard hardware on ViewLux lines loses adjustment within a few years. Doors rub against the frame, drawers pull crooked, and self-closing stops working. It reads like a cabinet failure but it’s a hardware failure, and it’s fixable without replacing the box.
- Racked back panels on wall cabinets. The back panels on ViewLux wall cabinets are thin and twist out of square when hung on an out-of-plumb Homestead block wall without proper furring. Once the back racks, the whole cabinet follows and the doors never sit flush again.
- Raised-panel oak finish checking. The ViewLux raised-panel oak line handles humidity better than MDF, but the panel joints can open and the finish can check where sun hits a south-facing run. That’s a refinish and re-seal job, not a replacement, if you catch it early.
Most ViewLux calls start the same way: kitchen doors that no longer close flush and drawer fronts that rub. Nine times out of ten it traces back to a sagging particleboard or MDF box and worn original hinges, not to the doors themselves.
ViewLux Parts & Our Repair-vs-Replace Approach

Parts are sourced per job, matched to the specific ViewLux line and finish you have. We don’t claim local stock, because we don’t keep it. What we do is order the right OEM-compatible door, drawer front, or hinge when the finish and dimensions have to match, and spec quality aftermarket soft-close hinges and full-extension glides when the OEM hardware is the part that keeps failing.
The repair-or-replace call is honest. If a ViewLux box has swollen MDF or a sagging particleboard carcass, patching it is money spent to postpone the same problem. Replacing that cabinet is the more durable answer. If the box is sound and only the doors and hardware are tired, refacing or a door swap is the smarter spend. We tell you which one you’re looking at in writing, with the price attached, before anything gets ordered. Call (844) 834-4248 and we’ll walk you through it.
Our ViewLux Service Process – Step by Step
- 1
Diagnosis. We check the ViewLux wall for plumb and the boxes for sag before we touch the doors. The photo record captures what we found, whether the culprit is MDF swelling, a racked back panel, or worn hinges, so you can see it too.
- 2
Repair or install. Failing boxes come out and get replaced. Where cabinets go back or new ones go in, we fur and block the boxes before setting countertops, and re-hang doors with adjustable soft-close hardware. No change proceeds without a signed change order.
- 3
Test. Every door and drawer gets cycled through a full open and close, checked for flush alignment and rub. Countertops get checked for level and load before the job closes out.
- 4
Warranty. You get a written warranty on the work and the photo record of the finished install. The 365-Day Done Right Promise backs it: if it isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Homestead
We service and install across the ViewLux cabinet and millwork lineup: the Shaker-style all-plywood base and wall cabinets with MDF door fronts, the raised-panel oak kitchen cabinet line, the Ready-to-Assemble series, and the bathroom vanity cabinet line. We handle door and drawer face replacement, hinge and glide upgrades, box repair and replacement, refacing, and full kitchen builds around ViewLux boxes. We don’t stock these lines, so lead times depend on the specific part and finish you need. That’s true whether you’re in an older Homestead ranch home or a newer block-and-stucco subdivision.
We Also Service These Brands
Rowan Construction Group Homestead is a multi-brand shop, not tied to ViewLux. We also work on KraftMaid, Cambria, Silestone, and Kohler cabinetry, countertops, and fixtures, among others. That means the recommendation you get is based on what matches your kitchen and your budget, not on what we’re pushing. If a competing brand fits the job better, we’ll say so.
FAQs – ViewLux Construction Service in Homestead

Can you replace just the doors and drawer fronts on my existing ViewLux cabinets? Yes. If the boxes are sound, door and drawer front replacement is the right move and the most cost-effective one. We match the ViewLux line and finish so the new faces sit flush with what’s there.
My ViewLux cabinet doors are swelling at the bottom near the dishwasher – what causes that? MDF-core cabinet faces absorb humidity and steam from the dishwasher and swell at the bottom edge, then the finish delaminates. That’s a common ViewLux issue in Florida kitchens. The fix is usually replacing the affected doors and checking the sink cabinet for the same thing.
Will you install quartz or granite on top of ViewLux RTA cabinets? Only after we confirm the box is blocked and shimmed to carry the load. ViewLux Ready-to-Assemble cabinets will sag under stone if they aren’t blocked correctly. We check the sub-structure and load path before any slab goes on. Call (844) 834-4248 for a written estimate that includes that check.
Do you use ViewLux OEM parts or aftermarket hardware? Both, depending on the job. We use ViewLux-compatible OEM doors, drawer fronts, and hinges where the finish and dimensions have to match. We use quality aftermarket soft-close hinges and full-extension glides when the original hardware is the weak point.
How do you handle ViewLux cabinets on out-of-plumb block walls in Homestead? We fur and block first. ViewLux wall cabinets rack out of square when hung on a wall that’s out of plumb without proper furring, and the thin back panels twist. Fixing the furring before the cabinets go up is what keeps the doors flush.
How much does ViewLux construction cost in Homestead? A kitchen remodel runs $14000 – $45000, cabinet installation $4000 – $13000, countertop installation $2000 – $6500, backsplash $800 – $2500, and kitchen island installation $3000 – $10000. Call (844) 834-4248 for an exact quote. Estimates are free.
Book Your ViewLux Service in Homestead, FL
Bring us your ViewLux doors that won’t close, your RTA boxes that sag, or your full kitchen plan. You’ll get a flat written price and written scope, a documented photo record, and the 365-Day Done Right Promise on the work. Call (844) 834-4248 to schedule your free estimate anywhere in Homestead.
Written by the team at Rowan Construction Group Homestead.












