







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose Cover Construction
Rowan Construction Group Homestead provides independent Cover construction service in Homestead, FL – cabinet installation, refacing, and quartz or granite countertops on Cover frameless cabinetry – with a flat written price before any work starts. What makes our Cover work different is that we work on it every week without being tied to the manufacturer, so we can tell you honestly whether your Cover cabinet run is worth refacing or should be pulled entirely. We’re not Cover dealers and we’re not authorized by Cover; we’re an independent Cover service provider. Call (844) 834-4248 for a free estimate on any Cover cabinet or millwork project.
Why Trust Rowan Construction Group Homestead for Your Cover Construction?

Our technicians have up to 19 years of experience, and a good share of that has been spent inside Cover frameless boxes – squaring them, re-anchoring them, and replacing the soft-close hinges and slides that fail on doors used every day. That familiarity matters because Cover’s full-overlay door styles and frameless construction have specific tolerances: an eighth of an inch of rack in the box shows up as a door that rubs the stile, and a hinge plate mounted a few millimeters off kills the dampening on the door. We know where those tolerances live.
We use OEM-compatible and quality aftermarket parts rather than insisting on Cover-branded hardware, because for commodity frameless cabinets the hardware almost always fits and often outlasts the original. And we work warranty-safe: we re-hinge and rehang without disturbing the cabinet finish warranty, and we document everything we touch with a photo record on every visit, so you have evidence if a finish issue ever comes up. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool. That’s the whole point. Call (844) 834-4248 to schedule a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in Homestead
Homestead’s subtropical humidity and hurricane-season swings hammer cabinet boxes in ways inland Florida rarely sees. Here are the Cover failure modes we fix most often.
- Racked frameless boxes and sagging doors. Cover’s frameless full-overlay cabinet lines rely on doweled and screwed box joints, and after years of humidity cycling those joints loosen. The box racks slightly, the doors no longer hang square, and full-overlay fronts start to rub at the stile. Re-squaring and re-anchoring to the wall studs usually fixes it.
- Door and drawer fronts de-laminating at the edges. Cover’s full-overlay shaker and slab fronts are finished over an MDF core, and where that finish meets the edge the humidity finds a way in. You’ll see the laminate lift or the paint line crack along the door perimeter, especially on doors facing the most sun and moisture.
- Soft-close hardware losing dampening. Cover’s soft-close hinges and slides are the first thing to go on doors that get daily use. The dampener fails, the door slams, and the hinge armoges loosen from the repeated impact.
- Water swelling at the toe kick and sink base. Under-cabinet leaks go unnoticed until the particleboard box swells and the toe kick bulges. Once the substrate has swollen and won’t compress back, that box is beyond refacing.
- Cover refacing kits not seating flush. When a refacing door and panel kit was installed over a box that had already racked, the new fronts rub and gap. The kit is fine; the box underneath needed squaring first.
Cover Parts & Our Repair-vs-Replace Approach

Cover cabinets are generally commodity box construction, which changes the parts conversation. Matching Cover-branded hinges and slides isn’t essential – quality aftermarket soft-close hardware from recognized makers usually fits the existing hinge plates and outlasts the original. We source the right hardware for each job; we don’t claim to stock it locally, because we don’t. What we do claim is a written price and a written scope before anyone touches the cabinets.
The honest repair-vs-replace line is this: reface and re-hinge when the boxes are square and dry, replace when the substrate has swelled or the boxes have racked beyond what anchoring will hold. A typical Cover kitchen call starts with doors rubbing the frame and drawers that no longer glide; pulling a door shows the frameless box has racked slightly and the original soft-close hinges have lost their dampening. The usual fix is to re-square and re-anchor the boxes to the wall studs, swap the hinges and slides, and rehang the doors – assuming the panels haven’t swelled. If the sink base or toe kick shows moisture swelling, a qualified pro will recommend replacing those boxes rather than refacing over them. Call (844) 834-4248 and we’ll tell you which side of that line your cabinets are on.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We open the doors, check the box for rack with a square, test the hinge and slide dampening, and probe the toe kick and sink base for swelling. You see what we found in plain terms, not a sales pitch.
- 2
Written price and scope. Before any work starts, you get a flat written price with the scope spelled out and a written warranty – refacing, re-hinge, or full replacement of specific boxes. No work proceeds on a change until the change order is signed.
- 3
Repair or install. We re-square and re-anchor the boxes, install quality soft-close hardware, and rehang doors – or set new Cover cabinets and top them with quartz or granite. Every crew member is background-checked and uniformed.
- 4
Test. Every door and drawer gets cycled, checked for rub and gap, and adjusted. The photo record documents what we found and what we did.
- 5
Warranty. You leave with the written warranty and the photo record, backed by the 365-Day Done Right Promise: if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterCover Products We Service & Install in Homestead
We work on Cover’s frameless full-overlay kitchen cabinet lines in shaker and slab door styles, Cover bath vanity cabinet lines, Cover cabinet refacing door and panel kits, and Cover pantry and tall cabinet units. On top of the boxes we install quartz and granite countertops – Cambria and Silestone among the brands we source – plus backsplashes and kitchen islands. Whether it’s a single row of pantry cabinets or a full kitchen run, the scope is written down and the price is written down before we start. Call (844) 834-4248 for a free estimate.
We Also Service These Brands
Rowan Construction Group Homestead isn’t a single-brand shop. Alongside Cover we service and install KraftMaid, Cambria, Silestone, and Kohler cabinetry, countertops, and fixtures, so your written quote reflects real material choices rather than whatever one manufacturer pushes. If we find a better match for your cabinets or countertop, we’ll say so – that’s the benefit of staying independent. Call (844) 834-4248 to talk through your options.
FAQs – Cover Construction Service in Homestead

Is Rowan Construction Group Homestead authorized by Cover? No. We’re an independent Cover service provider – not Cover dealers and not authorized by the manufacturer. That independence is the point: we can tell you honestly whether a Cover cabinet run is worth refacing or should be pulled entirely, without a sales quota behind the answer. Call (844) 834-4248 for a free estimate.
Do you use genuine Cover/OEM parts? Not always, and that’s usually to your benefit. Cover cabinets are commodity box construction, so quality aftermarket soft-close hinges and slides from recognized makers typically fit and outlast the originals. We use OEM-compatible hardware where it makes sense and tell you which we’re using and why.
How long does Cover service take in Homestead? A re-hinge and door rehang is usually a single visit; a refacing job typically runs one to three days depending on the number of fronts; a full cabinet replacement runs longer because countertops and backsplash follow. You get the timeline in writing with the price before work starts.
What Cover models/series do you cover? Cover’s frameless full-overlay kitchen cabinet lines in shaker and slab styles, bath vanity cabinet lines, cabinet refacing door and panel kits, and pantry and tall cabinet units. If you’re unsure which line you have, we’ll identify it during the free estimate.
Will service void my Cover warranty? Re-hinging and rehanging with quality aftermarket hardware doesn’t void the cabinet finish warranty, and we work warranty-safe by design. We document every step with a photo record so you have evidence of what we touched if a finish issue ever comes up. Call (844) 834-4248 with questions about your specific warranty.
How much does Cover construction cost in Homestead? Cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, kitchen island installation $3,000 – $10,000, and a small kitchen remodel $9,000 – $20,000. Call (844) 834-4248 for an exact quote – estimates are free.
Book Your Cover Service in Homestead, FL
Whether your Cover cabinet doors are rubbing, your soft-close hardware has quit, or you’re ready to reface a dry, square run instead of replacing it, Rowan Construction Group Homestead will put the number in writing before anyone picks up a tool. Call (844) 834-4248 for a free estimate and a free second opinion on any written quote you already have.
Written by the team at Rowan Construction Group Homestead.












