







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Cutler Bay, FL
Rowan Construction Group Homestead provides independent CGI window, impact door, and shutter service across Cutler Bay, FL. We’re not authorized, sponsored, or endorsed by CGI – we’re a contractor that works on these systems every week, which means our advice comes from South Florida field experience rather than a brand program. What makes our CGI work in Cutler Bay different: the 1990s housing stock in ZIP 33189 often doesn’t match its original permit drawings, so a simple impact window swap can turn into a permitting conversation before anyone touches a sill. Call (844) 834-4248 for a free estimate.
Why Cutler Bay Residents Choose Us for CGI Service

CGI systems are common in Cutler Bay’s planned subdivisions off Old Cutler Road and US-1. That familiarity matters when a slider starts dragging or a shutter track misaligns, because we know where these assemblies typically fail first. Our technicians have up to 19 years of experience with impact-rated aluminum windows, sliding glass doors, and accordion and roll-down shutter systems.
Parts matter as much as labor. We use CGI OEM replacement rollers, glazing gaskets, locks, and shutter hardware where the frame and glass are still serviceable, and turn to quality aftermarket impact glazing or hardware only when OEM parts are discontinued. Every project starts with a flat written price and written scope under Clause 1 of The Haven Standard, and every visit leaves you with a documented photo record as a standard deliverable. Our CGI service covers the full range of CGI assemblies found in Cutler Bay homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Cutler Bay
- Roller and track wear on CGI sliding impact doors. Grit and salt-laden air pit the tracks and flat-spot the rollers, so panels drag and stop seating against the weather seal. Cutler Bay’s proximity to the coast accelerates this far faster than an inland address.
- Glazing seal and interlayer breakdown on older CGI impact units. Years of intense summer sun cloud or delaminate the laminated glass. A unit can look intact and no longer carry its original impact rating, which is a safety problem, not a cosmetic one.
- Water intrusion at perimeter flashing and sill pans. Common where original builder-grade openings in 1990s Cutler Bay homes were never re-detailed to current HVHZ uplift and drainage requirements. Heavy rainy-season downpours find those gaps quickly.
- Corrosion and fastener fatigue on CGI aluminum frames and shutter hardware. High humidity and storm exposure show up as sticking latches, stripped anchors, and misaligned shutter tracks, often found during pre-season checks.
- Mismatched openings on former-farmland lots. Original permit drawings frequently don’t reflect what was actually built, so a CGI impact window replacement in Cutler Bay can require verifying the existing opening before a compliant new unit is ordered.
CGI Service in Cutler Bay: What Local Conditions Mean for Your Equipment
Much of ZIP 33189 was built on former Redland farmland during the 1990s boom, and that history still shapes the work today. Window and door openings frequently do not match original permit drawings. A straightforward CGI impact window swap can require Miami-Dade tree-preservation or floodplain review before the permit clears, especially on lots that still carry mature trees from the agricultural era. In a typical Cutler Bay impact-window or sliding-door job, a homeowner notices a CGI slider that drags, leaks at the sill during rainy-season downpours, or has visibly clouded glass after years of subtropical sun. A qualified local contractor pulls the original 1990s-era permit and product approval, checks the opening for corroded flashing and uplift-rated anchorage, and then either rebuilds the track and re-glazes with compliant components or replaces the unit with a current HVHZ-rated assembly that satisfies Miami-Dade inspection. That permit history is why CGI work in Cutler Bay takes a little more verification than in newer subdivisions. Every quote we write comes as a flat price with a written scope, and no change proceeds without your signed change order. Serving Cutler Bay means working within those rules, not around them – our Cutler Bay service area work covers window, door, roof, and kitchen projects across 33189.
CGI Models & Products We Service in Cutler Bay
We service the CGI lines most common in Miami-Dade subdivisions built from the 1990s through the 2000s: impact-rated aluminum single-hung and horizontal slider windows, vinyl impact sliding glass doors used for lanai and pool-enclosure openings, accordion and roll-down hurricane shutter systems, and aluminum-framed impact glass door systems for patio and entry openings. Parts are sourced per job based on the actual condition of the frame, glass, and hardware – we don’t claim local stock. When OEM parts are discontinued, we tell you and explain the aftermarket alternative in the same sentence. If the frame is corroded or the laminated glass has failed, honest advice is usually replacement rather than chasing parts. Our roofing and Cutler Bay service area kitchen work runs on the same written-price discipline.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Cutler Bay

Below are the ranges we work from for the CGI-related and related construction services most requested in Cutler Bay. Actual cost depends on unit count, opening size, condition of the existing frame, and whether permit review adds scope.
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
A free estimate includes a written line-item quote, a written scope, and a written warranty. Bring a competitor’s quote and we’ll review it line by line at no charge – that’s our Free Second Opinion offer. Call (844) 834-4248 for an exact quote; estimates are free.
Serving Cutler Bay, FL – Our Local Coverage Area
We serve Cutler Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Cutler Bay
Does CGI make impact windows that meet Miami-Dade HVHZ requirements for Cutler Bay homes? Yes. CGI’s impact-rated aluminum single-hung and slider lines are HVHZ-rated and used across 1990s – 2000s Miami-Dade subdivisions, including Cutler Bay. We verify the product approval for your specific opening before ordering.
My CGI sliding impact door drags and leaks at the sill – can it be repaired or does it need replacement? Often it can be repaired if the frame and glazing are still serviceable and the leak is track, roller, or flashing related. If the laminated glass has delaminated or the frame is corroded, replacement is the honest answer. Call (844) 834-4248 for a free on-site assessment.
Why does a simple CGI window replacement in 33189 sometimes need more than a window permit? Because much of 33189 was built on former Redland farmland, openings often don’t match original permit drawings, and Miami-Dade tree-preservation or floodplain review can apply. We handle the permit pulling and inspection for you.
How does Cutler Bay’s summer sun and storm season affect CGI window and shutter hardware? Intense UV breaks down glazing seals and interlayers over time, and humidity plus salt air corrode aluminum hardware and anchor fasteners. A pre-season shutter check catches sticking latches and misaligned tracks before a storm does. Call (844) 834-4248 to schedule.
Are you authorized by CGI to service or install their products? No. Rowan Construction Group Homestead is an independent contractor and is not authorized, sponsored, or endorsed by CGI. We work on CGI products every week and recommend based on what holds up in South Florida exposure.
Service Areas Near Cutler Bay
We also serve homeowners in Homestead, Leisure City, Naranja, Princeton, Goulds, and South Miami Heights. Work in Palmetto Estates and West Perrine follows the same written-price discipline and documented photo record you get in Cutler Bay.
Book Your CGI Service in Cutler Bay Today
If a CGI slider is dragging, a shutter track is misaligned, or a window has clouded after years of subtropical sun, call Rowan Construction Group Homestead at (844) 834-4248 to schedule your free estimate. A written price before any work starts, backed by the 365-Day Done Right Promise and The Haven Standard.
Written by the team at Rowan Construction Group Homestead.












