







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Palmetto Bay, FL
We provide independent Dvele construction service across Palmetto Bay – site prep, foundation interface, module set, and finish work on LUMEN and two-story stacked configurations – but we are not Dvele, not authorized by them, and not affiliated with the manufacturer. What makes our Palmetto Bay work different comes down to sequencing: this is a tree-canopied Village where arborist review and a tree permit often land before a foundation or crane pad does, so a modular placement here has to be engineered around root zones that don’t exist as a constraint in the cut-and-build suburbs nearby. Call (844) 834-4248 for a free estimate and a written price before anything moves.
Why Palmetto Bay Residents Choose Us for Dvele Service

Dvele homes are plant-built. Panels arrive finished, tolerances are tight, and the steel chassis is engineered rather than site-framed. That means the people completing the marriage joints, flashing, and tie-ins on your lot have to think in two languages at once: the factory spec and the Miami-Dade inspection sequence. Our technicians have up to 19 years of experience reading both.
We’re an independent provider of Dvele service, so we work from the plant’s own connector and gasket documentation rather than guessing at equivalents. On a Palmetto Bay lot, the binding constraint is usually the canopy, not the house. Crews move equipment, stage materials, and set the crane pad around protected root zones, then hand you a documented photo record of what was found and what was done – included as standard, not an upgrade. Under Clause 1 of the Haven Standard, you get a flat written price before anyone picks up a tool.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Palmetto Bay
- Moisture at module-to-module marriage joints. The field-applied sealant and flashing at the joint are completed on site, not in the plant. Palmetto Bay’s driving summer storms find any gap in that joinery inside a single wet season, and the stain usually shows up inside, not on the roof.
- Finish cracking and fastener back-out along seams. This is differential settlement – modules landing on variable fill over limestone rather than a uniform engineered foundation. Older Palmetto Bay lots sit on former agricultural and rock-mine ground, so fill depth changes block to block. Drywall joints at the seams telegraph that movement first.
- Accelerated corrosion on the galvanized chassis. Under the dense live-oak canopy that covers most of this Village, leaf litter, tannins, and persistent shade keep the chassis and sill zones damp far longer than an open lot would.
- Roof-to-wall and module tie-in details that miss the load path. Miami-Dade reviewers want continuous-load-path and strapping documentation. When the tie-in details don’t match it, corrective engineering has to happen before final inspection.
- Impact glazing and roof upgrades on modular walls. Palmetto Bay runs on hurricane code – impact glazing, roof-to-wall strapping – and retrofit work on a panelized wall system demands openings cut to the plant’s frame layout, not a site-framer’s assumption.
Dvele Service in Palmetto Bay: What Local Conditions Mean for Your Equipment
Palmetto Bay’s tree ordinance requires arborist review and a tree permit before site work begins on canopied lots. That one rule rewrites the whole schedule for a modular placement. Before a footing is poured or a crane pad is set, the plan has to demonstrate root-zone protection for mature live oaks – the same canopy that makes this Village what it is. In the estate pockets west of US-1, and along the half-acre-plus lots throughout ZIP 33158, this is not a formality. A Dvele home sited without that sequencing gets engineered twice: once for the Village, once for Miami-Dade, and the second version costs more. We build the arborist review into the plan from the start, so the module set and the foundation interface answer to the trees rather than fighting them after the fact. It’s a step that simply doesn’t exist in neighboring cut-and-build suburbs, where lots arrive cleared.
Dvele Models & Products We Service in Palmetto Bay
We work on the Dvele LUMEN series modular single-family homes, two-story and stacked modular configurations on multi-module set plans, and the steel-chassis raised/piers foundation package used for flood-zone siting. On parts, our approach is deliberate: proprietary module joinery is not where aftermarket substitutions belong. We use Dvele’s plant-supplied connectors, gaskets, and panel trims where they exist, and documented equivalent-grade hardware only for generic items like fasteners and flashing. Parts are sourced per job against the model’s documentation – we make no claim to stock Dvele parts locally. Where a joint, seal, or finish has failed, honest repair is usually the right call; full module replacement rarely is, unless the steel chassis or a structural panel is compromised. That repair-first stance is why our written numbers stay honest.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Palmetto Bay

Every quote is a flat written price with a written scope before work begins, and no change proceeds without a signed change order. That discipline is what has kept projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. Here’s where Palmetto Bay Dvele work typically lands:
| Service | Price range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| ADU Construction | $90,000 – $220,000 |
What drives the number: tree protection and arborist review, foundation interface work on variable fill, and whether the tie-in details already meet Miami-Dade documentation. A free estimate includes the site walk, the scope in writing, and a line-item price you can screenshot and compare. Call (844) 834-4248 for yours.
Serving Palmetto Bay, FL – Our Local Coverage Area
We serve Palmetto Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Palmetto Bay
Yes, but the tree permit and arborist review typically have to clear before foundation or crane-pad work. Palmetto Bay’s ordinance requires root-zone protection for mature live oaks on canopied lots, and the plan needs to show it. Build that sequencing in early and the Miami-Dade inspection path runs clean. Call (844) 834-4248 to talk through your lot.
Check the marriage joint first – the field-applied sealant and flashing completed on site, not in the plant. A stain or paint blister along an interior seam after a heavy summer storm almost always traces there rather than to the factory panel. A qualified local pro pulls back the joint trim, re-flashes and re-seals to plant spec, checks the roof-to-wall tie and chassis connections, and documents the repair so it holds through hurricane season and passes inspection. Call (844) 834-4248 and we’ll give you a written price before any work starts.
It does, because canopy changes the moisture load. Leaf litter, tannins, and constant shade keep the galvanized chassis and sill zones damp far longer than an open lot. We inspect for corrosion at the connections, clear the litter line, and document what we found with photos. Under the 365-Day Done Right Promise, if it isn’t done right, we make it right.
Yes. Home additions on modular homes are common in Palmetto Bay, and they run $45,000 – $130,000 depending on scope and how the new structure ties into the panelized wall system. The junction detail is the whole job – it has to match the continuous-load-path documentation the County expects. Bring us a competitor’s written estimate and we’ll review it line by line at no charge. Call (844) 834-4248.
Substantially. Palmetto Bay’s high water table and flood zones complicate grading and foundations, which is exactly what the Dvele steel-chassis raised/piers foundation package is built for. Siting the piers correctly on variable fill over limestone is the difference between a stable set and settlement at the seams later. Call (844) 834-4248 for an exact quote – estimates are free.
Service Areas Near Palmetto Bay
We provide Palmetto Bay service area coverage across ZIP 33158 and the surrounding communities, including Homestead, Palmetto Estates, West Perrine, South Miami Heights, Goulds, and Leisure City. If your lot sits under canopy anywhere in the area, the same tree-first sequencing applies.
Book Your Dvele Service in Palmetto Bay Today
Bring us your lot, your model documentation, or a competitor’s written estimate – the second opinion is free, and so is the estimate. Every job gets a flat written price before work begins, background-checked technicians, a documented photo record, and calls answered by a live person. Call (844) 834-4248 to schedule your Dvele service in Palmetto Bay.
Written by the team at Rowan Construction Group Homestead.












