







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Homestead Owner’s Guide
Bathroom remodeling built around Moen fixtures in Homestead runs $9,000 – $28,000, and we write that price down before a single tile is set. Many owners land here because a Moen valve, cartridge, or trim has failed mid-project and they need it matched to their model and priced honestly. In Homestead, we regularly see Moen cartridges stiffen within a few years because the water here carries a lot of dissolved minerals, and the first symptom is usually a handle that grinds instead of turning smooth.
If you want the exact number for your bathroom, call (844) 834-4248 and we’ll put a written scope and a flat price in front of you, free. Under Clause 1 of the Haven Standard, no work proceeds until you’ve signed off on the price.
Which Moen Models This Applies To

Moen’s naming gives you almost everything you need. Most single-handle shower and tub valves in Homestead homes use one of three trim families – the 1200/1222, the 1225, or the Posi-Temp 82400 series – and the cartridge inside differs by generation. The 1225 cartridge is not interchangeable with the 1222, and swapping them is the most common mismatch we find. Pull the trim plate off and the brass body behind it should carry a stamped model number. If it doesn’t, measure the valve body and photograph the cartridge before ordering.
For OEM versus aftermarket: Moen’s own cartridge runs higher but matches the spec exactly, while a quality aftermarket equivalent can be a fair choice for a rental or a quick fix. Wear parts inside a Moen faucet – the ceramic disc cartridge, the O-rings, the aerator – fail in that order, so a slow drip that later won’t shut off usually points to the cartridge, not the trim. We’re an independent service provider and not affiliated with Moen. We also work with KraftMaid, Cambria, and Silestone when a full remodel is on the table.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
These are the symptoms we hear most in Homestead, and what’s usually behind each one:
- Handle that grinds or sticks. Mineral scale has built up inside the cartridge, so the stem drags instead of turning freely. Replacing the cartridge fixes it; rebuilding the handle won’t.
- A drip from the spout after shutoff. The cartridge’s ceramic seals have worn, letting a trickle past. It only gets worse under sustained use.
- Water temperature that won’t hold. On a Posi-Temp valve this usually means the pressure-balancing spool has failed, not the cartridge. Mixing the two up wastes a repair.
- Reduced flow at the head. Often the aerator or a clogged screen, though a failing valve body can starve the line. Check the screen first.
- Water where it shouldn’t be. A leaking valve body behind the wall, seen as a soft spot in drywall or a stain on the ceiling below. This is the one to stop and call about.
Each of these is a repair we’ve made hundreds of times. The part is often a $20 – $60 cartridge; the labor to open the wall safely is what the price covers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Moen-anchored bathroom remodel in Homestead ranges from $9,000 to $28,000, and the number is written before work starts. A smaller update sits at $5,000 – $12,000. A tub-to-shower conversion with a new Moen valve and trim is $3,500 – $10,000. A shower replacement alone runs $3,000 – $8,500, and a vanity swap is $800 – $3,000.
Here’s what moves the price: whether the valve body is behind drywall that has to open and close, the finish grade of the Moen trim, and whether the waste and supply lines need reworking to current code. We put the part number and the labor line side by side in the written quote, so you see exactly what you’re paying for. Workmanship is covered by our written warranty, and the 365-Day Done Right Promise means if it isn’t right, we make it right.
Call (844) 834-4248 for a free estimate, and a written price in Homestead that stays flat unless you sign a change order. We’ll also review a competitor’s written quote line by line at no charge if you want a second opinion.
DIY or Call Us?
You can safely check a few things yourself: look for water staining under the vanity, test whether the handle turns smoothly, and make sure the shutoff valve behind the toilet or under the sink actually closes. Those checks cost nothing and tell us a lot.
Where DIY goes wrong: pulling a valve cartridge usually means shutting off the main and draining the line, and if the old brass or the stop valve is seized, you’re looking at water on the floor or a shutoff that won’t seat. A leaking valve body behind wet-area drywall is not a weekend job. And Moen’s model families genuinely don’t cross over, so ordering the wrong cartridge starts the whole thing over. If the water reaches the wall cavity, stop and call. We’ll look at it and give you the number first.
FAQs

A Moen cartridge typically lasts 5 to 10 years, but Homestead’s mineral-heavy water can cut that to 3 – 5 years, which is why we see stiff handles and drips more often here than in softer-water parts of the county. Call (844) 834-4248 if yours is grinding or leaking – estimates are free.
Yes, often only the cartridge needs replacing, which is the cheapest path, while a failed pressure-balancing spool or a cracked valve body means a fuller replacement. We tell you which one you’re facing before any quote. Call (844) 834-4248 for an honest read.
A straight cartridge replacement is usually an hour or two, while a valve-out remodel takes days, and a full bathroom remodel runs longer depending on the scope. We tell you the schedule up front, not the morning of.
We match the exact model to your stamped valve body or a photo of the cartridge, then order the OEM part for the best fit, or a quality equivalent when you prefer it. Nothing is guessed. Call (844) 834-4248 for a free estimate and a written price in Homestead.
Call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate. You’ll get a written price before any work starts, a documented photo record of every visit, and a background-checked crew – the same standard we apply across the seven trades we build.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












