







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Homestead Owner’s Guide
We install and repair Moen-compatible driveway and paver systems in Homestead, and the honest starting number for a paver driveway is $7,000 to $18,000 installed, with concrete running $4,500 to $12,000. This is planned work, not emergency work, so we schedule it rather than promise it today. Homeowners usually discover a failed component slowly: a paver edge that lifts after heavy rain, sand washing out of joints in sheets, a base that feels soft underfoot in the same spot after every storm, or a finish that chalks and fades within two seasons. Each of those points to something different under the surface, and naming which one is failing is where a written scope starts.
Which Moen Models This Applies To

Moen’s outdoor hardscape line is smaller and more specific than its faucet catalog, so model identification matters more here than it does indoors. The homeowner-facing label is usually on the banding of the pallet, on the pallet tag, or in the spec sheet that came with the delivery; the paver face itself carries a mold mark that identifies the profile, not the model. Measure a single unit’s length, width and thickness before you order anything: a nominal 4×8 paver and its actual cast dimensions can differ by enough to break a running bond, and mixing the two in one field shows up as a wandering joint line six months later.
For Moen specifically, the OEM-versus-aftermarket call comes down to color and profile continuity. If your field is a discontinued Moen color, matching it from a third party rarely lands clean, and blending an unsealed aftermarket unit into a sealed field produces a visible tone difference. Where color matching isn’t the constraint, a quality aftermarket paver in the same dimensional spec performs comparably, and we’ll say so in the quote. The same logic applies across brands we service, including KraftMaid, Cambria and Silestone on the interior side.
We are an independent contractor and are not affiliated with Moen. We source to your model and spec, and we put the part number in the written quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Driveway & Pavers Is Failing
- Joint sand washing out after rain. Polymeric sand that disappears in sheets means the joints were underfilled or the base below is moving and pumping the sand out from underneath.
- Rutting in the same two tracks. Compaction failure in the base layer, not the pavers. South Florida’s high water table and heavy summer rain load that base harder than a northern install ever would.
- Edge pavers tilting or spreading. A missing or shallow edge restraint, or one that wasn’t set into concrete. Once the edge opens, the field starts to migrate.
- Efflorescence that returns after every rain. Alkali salts migrating from the base or the paver body itself. It tells you moisture is moving through the system rather than draining off it.
- Chalking, fading or color loss within two seasons. UV exposure on an unsealed or low-grade finish. Homestead sun and salt air in the coastal stretches accelerate it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed ranges for Homestead sit as follows. These are flat written prices with a written scope, not estimates that drift once the crew opens the ground.
| Work | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
The range is driven by square footage, base depth, how much existing material has to come out, and whether an edge restraint is already in place. Parts and labor are broken out on separate lines so you can see what the material costs and what the work costs. The work carries our 365-Day Done Right Promise, and every visit includes a documented photo record of the base, the compaction and the finished field.
DIY or Call Us?
What you can safely check yourself: measure the failing unit, photograph the mold mark, confirm whether the joint sand is actually missing or just discolored, and note whether the soft spot is in the field or at the edge. What goes wrong for homeowners is the base. A paver surface is only as good as the compacted layer under it, and re-setting pavers over an unaddressed base means the same rut returns after the next wet season. This isn’t a part that will electrocute you or drop a garage door on you. It is heavy material, sharp edges, and a base failure that costs far more to redo than to diagnose once.
If you’ve already got a competitor’s written estimate, bring it over. We’ll review it line by line at no charge and tell you what’s missing.
Frequently Asked Questions

A properly installed paver driveway should hold 25 years or more, but the base and edge restraint decide that number far more than the paver does. In Homestead’s wet-season rainfall and high water table, an under-compacted base can fail in under five years while the pavers themselves remain perfectly sound. Call (844) 834-4248 for an exact quote on your driveway, and the estimate is free. Under Clause 1 of our Haven Standard, the price is written before anyone starts.
Often yes. If the field is intact and only a section has settled, we can lift, re-compact the base in that area and relay the original pavers, which is dramatically cheaper than a full replacement. What can’t be repaired is a paver that’s cracked through its body or a discontinued Moen color with no matching source. We’ll tell you plainly which situation you’re in before you commit to anything.
A single-day job covers most repairs and sealing; a full paver driveway installation typically runs three to five working days depending on square footage, base depth and how much existing material has to be hauled away. This is planned work and we schedule it as such rather than promising it today. You’ll get the schedule in writing with the price.
We source to your paver’s actual measured dimensions and profile, with the part number written into the quote before you approve it. Where a discontinued Moen color can’t be matched, we say so and quote the closest available option rather than installing something that will read as a patch. Every part on the written scope is one you can check.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.
Call (844) 834-4248 for a free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge, then hand you a flat written price with a written scope before any work begins.












