







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Homestead Owner’s Guide
We handle American Standard kitchen remodeling in Homestead at an installed range of $14,000 to $45,000 for a full kitchen, with smaller projects landing between $9,000 and $20,000. American Standard doesn’t build cabinets or countertops, so what “American Standard kitchen” usually means here is a kitchen built around American Standard fixtures (sinks, faucets, sometimes a pot filler or filtered-water tap) combined with standard cabinetry and stone. Most Homestead homeowners start asking us about this after one of three things: the faucet starts weeping at the base, the sink basin chips at the drain collar, or a fifteen-year-old cabinet run finally gives up around the American Standard sink they intend to keep. Our technicians have up to 19 years of experience, and the first thing we do is check whether the existing fixture is worth matching or replacing.
Which American Standard Models This Applies To

American Standard kitchen products most often found in South Florida homes fall into a few groups: the Colony and Silhouette faucet families, the Fairbury and Portsmouth sinks, and the Pekoe and Delancey undermount basin lines. Identifying the right part starts with the model and serial tag, which on American Standard faucets is typically stamped on the shank under the sink or inside the escutcheon plate; on sinks it’s usually a foil sticker on the underside of the basin. Photograph that tag before you do anything else, because the number on it is what a supply house can actually order against. If the tag is gone, measure the faucet center-to-center (4 inches or 8 inches on a deck-mount) and the sink cutout dimensions in inches.
On the OEM-versus-aftermarket question, American Standard faucet cartridges and aerators are widely available as genuine OEM parts, and the aftermarket equivalent is usually a fraction of the price but varies in quality by supplier. For sinks and basins, there’s no meaningful aftermarket path; the sink is the sink. If you’re keeping the American Standard sink but replacing the faucet, we’ll often steer you toward a compatible non-American Standard faucet from Kohler or a comparable line rather than reinstalling a cartridge that’s about to fail again. If you’re changing the whole kitchen, cabinet brands we work with include KraftMaid and Wellborn, and stone counters from Cambria, Caesarstone, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- Faucet weeping at the base, not the spout. That’s almost always a worn O-ring or cartridge seal on the body, not the aerator. It looks like a drip but the cause is one gasket above it, which quietly scores the finish over a few months.
- Drain collar chipping on the American Standard basin. Cast-iron and fireclay sinks develop pinholes at the drain collar where standing water sits. Left alone, it becomes a slow leak under the cabinet, and mold in the cabinet base follows within a season.
- Water pooling under the sink cabinet. Usually a failing tailpiece gasket or a faucet supply connection starting to seat wrong. In Homestead’s humidity, once the cabinet base gets wet it stays wet, and the particleboard swells in weeks.
- Cabinet doors rubbing the American Standard sink apron. On apron-front installations, cabinet doors sag when the hinges loosen or the wood swells. The sink isn’t moving; the cabinet run is.
- Persistent low water pressure at one tap only. A clogged aerator screen or a partially failed cartridge. If pressure drops at every fixture, it’s a plumbing issue, not an American Standard problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Homestead, an American Standard-compatible kitchen remodel runs $14,000 to $45,000. Smaller kitchens finish at $9,000 to $20,000. Breaking it down for a fixture-only refresh: cabinet installation $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash $800 to $2,500, kitchen island $3,000 to $10,000. If you’re replacing the American Standard sink and faucet within a larger remodel, those typically sit inside the cabinet or countertop line rather than as a separate item, and we’ll name them in the written scope so you know what’s included.
What drives the range: cabinet box and door material, whether the layout moves (plumbing and electrical relocation adds cost), counter material and edge profile, and whether we’re keeping or replacing the existing American Standard basin. Under the Haven Standard, every project carries a flat written price and written scope before work starts, no change proceeds without a signed change order, and the 365-Day Done Right Promise covers the workmanship. Every visit includes a documented photo record, not as an upgrade.
DIY or Call Us?
You can safely check your American Standard fixture and identify what you’re working with. Turn the water off at the angle stops, look at the tag, photograph it, and dry the cabinet base to see whether it’s actively leaking. What you shouldn’t DIY: replacing faucet cartridges and supply lines behind a counter without shutting water at the main, and any work involving electrical in the kitchen during a remodel. The reason isn’t skill as much as consequence: a slow supply-line leak behind a cabinet goes unnoticed for weeks, and by then the subfloor is wet. Replacing a sink basin also means cutting the countertop or disconnecting trap and disposal, which is where most owner jobs go wrong. Call us at (844) 834-4248 for a written price before anyone touches a tool.
FAQs

American Standard faucets typically last 10 to 15 years with cartridges and aerators replaced as needed; cast-iron and fireclay sinks last much longer (30+ years) but the drain collar is the failure point. Homestead’s humidity and salt-influenced coastal air accelerate pitting on exposed metal surfaces, so we find exterior chrome finishes age faster here than the manufacturer’s inland ratings suggest. Call (844) 834-4248 if you want us to look at yours in person.
Yes in most cases. Faucet cartridges, aerators, and supply lines are replaceable on their own, and a weeping base is usually a gasket, not a body failure. Sinks need replacement only when the basin is cracked or the drain collar is through the enamel. We’ll tell you plainly which one you’re facing after we look at it.
A faucet swap runs 1 to 2 hours; a sink-and-faucet replacement inside an existing counter is usually a half day, plus a day if we’re cutting the countertop. Anything that touches cabinets or counter becomes a kitchen remodel at that point, not a fixture swap, and the timeline is quoted in writing before we start.
We order against the model and serial number on the tag, not a photo, and we source genuine OEM parts for anything safety- or fit-critical (cartridges, supply lines, tailpieces). Where an aftermarket equivalent performs identically, we’ll name both in the quote so you can see what the trade-off costs in dollars. You’ll see the same quote format across our other brands, including KraftMaid, Cambria, and Silestone.
Call (844) 834-4248 for a free estimate on your American Standard kitchen remodeling project in Homestead. We’re an independent contractor and not affiliated with American Standard, but that’s exactly why we can tell you straight whether the fixture is worth keeping. A written flat price and written scope come before any work starts, and the second-opinion review of a competitor’s estimate is free.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












