







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Homestead Owner’s Guide
We install Schluter-based kitchen remodeling in Homestead, with most full kitchen projects landing between $14,000 and $45,000 installed. Small kitchens run $9,000 – $20,000, and cabinet-only work starts at $4,000. We’re an independent contractor, not affiliated with Schluter, and we work from a flat written price before the first tile is set.
Owners usually discover a problem the same way: a hollow sound underfoot when they cross from the dining room into the kitchen, a grout line that keeps cracking in the same place no matter how many times it’s patched, or a tile that lifts just enough to catch a sock. Those are the symptoms of an uncoupling membrane that wasn’t laid correctly, or wasn’t laid at all. In Homestead, where slab movement and humidity work on a floor year-round, the membrane is what separates a floor that lasts from one that keeps coming back to the same failure.
Which Schluter Models This Applies To

Schluter’s kitchen work breaks into a few product families, and each fails differently. Schluter-DITRA is the uncoupling membrane under tile – the one most homeowners end up asking about after a crack appears. Schluter-KERDI handles waterproofing at wet zones, the sink wall and the run behind the dishwasher. Schluter-DITRA-HEAT combines the membrane with an electric floor-warming cable, and that cable has its own failure modes. Schluter-RENO-U and RENO-TK are the edge profiles that finish tile against wood or carpet. Schluter-SHOWER is for the bathroom side of a remodel and doesn’t come into most kitchen jobs.
To identify what you have, pull the install paperwork if you kept it, or look at the membrane edge where tile meets a transition strip. DITRA has a specific grid pattern of square cavities on the underside; the roll width and the printed labeling on the fleece tell you the product. Measure the tile size and the roll width – both matter for matching the right replacement. The OEM-versus-aftermarket call here is straightforward: for waterproofing and uncoupling, we specify genuine Schluter rather than a lookalike. The uncoupling mechanics are the whole reason the product works, and the copies don’t always match. For the trims and edge profiles, quality equivalents are fine.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
Five things we see most often in Homestead kitchens, and what each one means:
- Hollow-sounding tile underfoot. The membrane lost bond to the substrate, usually from moisture trapped during install or a slab that moved before the thin-set cured. The tile hasn’t lifted yet, but the bond is gone.
- Cracks that return after every repair. A crack that keeps coming back means the movement is happening below the tile. Refilling the grout line patches the symptom and leaves the cause in place.
- Loose or tented tile at the perimeter. Tile lifts at the edges when the field expands into a wall with no room to move – a common sign the membrane was omitted at the transition.
- Grout haze that won’t clean off with a normal scrub. Efflorescence (white mineral deposits) on the grout surface points to moisture moving up through the assembly, often a KERDI waterproofing gap at the sink wall.
- Heated floor zones that stopped warming. On DITRA-HEAT, a dead zone usually means the heating cable was nicked during a later project or the thermostat connection failed. Both are diagnosable without tearing up the whole floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The installed price for kitchen work involving Schluter products in Homestead:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: floor square footage, whether the existing tile and membrane come up (they usually do), the tile itself, and whether KERDI waterproofing goes into wet zones. We also install KraftMaid and Cambria in the same project, and Cambria, Silestone, or KraftMaid quotes are itemized separately so you can see the parts-and-labor split. We don’t carry parts on a truck or hold stock – the materials are specified and ordered for your job. The 365-Day Done Right Promise backs the installation, and a written warranty comes with the flat price.
DIY or Call Us?
An owner can safely check a few things without touching the floor: record where the hollow spots are, photograph the crack pattern, and find the install paperwork. That’s it. The failure itself is below the tile, and the repair means removing the tile and the membrane without damaging the substrate underneath – which is where DIY goes wrong. A pry bar through a good membrane turns a small fix into a full-floor redo, and on DITRA-HEAT, one careless cut severs the cable. Call (844) 834-4248 for a free estimate. We’ll review what you found and tell you what the repair actually involves.
FAQs

A correctly installed DITRA floor lasts the life of the tile, typically 20 years or more in a Florida kitchen. The failures we see in Homestead come from install errors or slab movement – not from the product aging out – which is why the quality of the installation, not the membrane itself, determines how long the floor lasts. Call (844) 834-4248 if you want us to look at yours.
Sometimes. A single failed zone can be cut out and re-set if the surrounding tile is stable and the membrane edge can be properly integrated. A crack pattern that runs the length of the room usually means the whole floor needs attention. We’ll tell you which you have after inspecting it. Call (844) 834-4248 to schedule an inspection.
A backsplash with KERDI waterproofing runs one to three days. A floor membrane repair on a small area is typically two to four days once the materials arrive. A full kitchen with a new floor, cabinets, and countertops runs two to five weeks depending on scope. The written scope you get from us states the timeline before we start. Call (844) 834-4248 for an exact schedule.
We specify the correct product family for the job – DITRA for uncoupling, KERDI for waterproofing, DITRA-HEAT for a heated floor – and order it for your project from a standard distributor. We don’t keep stock or carry parts on a truck. The written quote itemizes the materials so you know exactly what’s being installed. Call (844) 834-4248 for a free second opinion on any written estimate, including a competitor’s.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












