A Rowan company - serving Homestead, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
S
Sterling · Homestead

Sterling Bathroom Remodeling in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Bathroom Remodeling in Homestead, FL: A Practical Guide

We handle Sterling bathroom remodeling in Homestead, FL: full room builds and part-level replacement on Sterling tubs, shower surrounds, faucets and vanities. Installed bathroom remodels in Homestead run $9,000 – $28,000, while a single failed part or fitting is a smaller, line-item quote we write before we touch it. If your Sterling fixture is leaking at the valve, the surround has a hairline crack, or the tub drain won’t hold water, that’s usually how owners find us: one small failure that’s grown into a bigger decision.

Call (844) 834-4248

Every Sterling job starts with a written flat price, a written scope, and a documented photo record of what we found when the crew leaves. We’re an independent Homestead contractor, not affiliated with Sterling.

Which Sterling Models This Applies To

A tile setter installing wall tile in a shower

Sterling builds fixtures under a few product families, and the part you need depends on the family. Sterling tubs and shower bases (the Accord, Ensemble and Intrigue lines) each have their own drain-and-strainer geometry and apron depth, so a part from one won’t fit another even though they look alike from six feet away. Sterling faucets (the shower and bath lines, sold as trim kits) are sold as components: the cartridge, the handle trim, and the rough-in valve are separate, and the cartridge number changes with the trim series. Pull the model plate inside the tub apron or under the faucet handle escutcheon and photograph it before you buy anything.

The OEM-versus-aftermarket call matters here. Sterling’s proprietary cartridges and their seat-and-spring kits are a certified match, but the price premium is real. Quality aftermarket equivalents sit in the same spec range on a properly measured bore, but only if the bore and seat dimensions match. We check both against the model plate before we quote a part.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Bathroom Remodeling Is Failing

The symptoms below point to a part or finish at end of life. In Homestead’s heat and humidity, the failure points show up fast:

  • A puddle at the base of the tub or shower. Caulk and the pan’s seal degrade faster in the South Florida climate than in a dry climate.
  • A slow drip you can’t shut off at the faucet. That’s usually a worn cartridge or a seat-and-spring kit.
  • Water that won’t hold in the tub. A failed drain-strainer seal or a bad plunger, not the tub itself.
  • A hairline crack in a shower surround or base. Sterling’s acrylic surrounds take thermal movement; small cracks spread under daily hot-water cycles.
  • Mildew that returns within weeks of cleaning. Failed caulk seams and an uneven pan are usually the cause, not your cleaning routine.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost in Homestead: What’s Included

A stone counter, tile backsplash and open shelf after a kitchen remodel

Here’s what installed pricing looks like for a Sterling job in Homestead, FL. These are the ranges we work to and put in writing before anyone picks up a tool:

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Shower replacement $3,000 – $8,500
Tub-to-shower conversion $3,500 – $10,000
Walk-in shower installation $4,500 – $12,000
Vanity installation $800 – $3,000

What drives the range: whether the substrate (the wall and floor board behind the tile or surround) is sound, whether the drain has to move, and whether the part is OEM or a matched aftermarket equivalent. We list parts and labor separately in the quote. Under our 365-Day Done Right Promise, if the work isn’t right, we come back and make it right. We also carry KraftMaid, Cambria and Silestone fixtures where a full remodel is in scope.

DIY or Call Us?

You can safely check a few things yourself: pull the model plate, look for a drip at the faucet, inspect the caulk seams, and confirm the drain holds. That’s diagnostics, not installation.

Where DIY goes wrong: reinstalling a tub or shower base, re-setting a surround, and re-caulking a wet seam are the jobs that turn a small failure into a footprint problem, and you need the drain re-sealed to a certified spec or you’ll be back in it within a year. Replacing a cartridge on a Sterling faucet is within reach for a careful homeowner if the water is shut off first, but a bad seat or a seized valve means you should have us in. Call (844) 834-4248 and we’ll give you a flat price for the part and the labor.

FAQs

A garage converted into a guest room and home office

How long does a Sterling bathroom part last in Homestead?
Most Sterling cartridges and drain kits last 10 to 15 years, but the South Florida heat and humidity can shorten that to 7 to 12 years on an exterior-wall tub or shower. If it’s over a decade old and showing a symptom, it’s a candidate for replacement.

Can I repair it instead of replacing it?
Sometimes. A worn cartridge or seat kit can be rebuilt instead of replaced, and we’ll tell you which is the better spend once we’ve seen the part. If the surround or base is cracked, a rebuild isn’t durable; the part needs replacing.

How long does the swap take?
A cartridge or drain-part swap is a single visit, often under two hours. A surround or shower replacement is a 1- to 3-day job, depending on whether the substrate needs work.

How do you source the part?
We match your Sterling model plate to the correct part, and we quote OEM or a matched aftermarket equivalent with the spec written in, so you can see what you’re paying for.

Call (844) 834-4248 for a free estimate on your Sterling bathroom project in Homestead. We’ll put the price in writing before anyone starts.

Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch