A Rowan company - serving Homestead, FL
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Owens Corning · Homestead

Owens Corning Kitchen Remodeling in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A new concrete driveway with a paver border
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Kitchen Remodeling: The Homestead Owner’s Guide

Owens Corning makes insulation, roofing, and building envelope products rather than kitchen fixtures, so “Owens Corning kitchen remodeling” in Homestead almost always means one of two things: replacing the Owens Corning insulation in your kitchen walls or ceiling during a remodel, or matching an Owens Corning roofing or wall system while a kitchen project opens up the framing. A full kitchen remodel in Homestead runs $14,000 – $45,000 installed, and the insulation scope inside that number is usually $800 – $2,400 depending on wall area and ceiling type.

Call (844) 834-4248

Owners typically discover the problem in the middle of a remodel, not before it. A contractor pulls the drywall behind the cabinets and finds insulation that’s been soaking up humidity for years, or a wall cavity with no vapor control at all, which is common in older Homestead homes. That’s the moment the question shifts from “what tiles do we pick” to “what insulation do we put back, and what does Owens Corning actually make for this wall.”

Key Takeaways

  • Owens Corning’s kitchen-relevant products are insulation and building envelope materials, not cabinets or countertops.
  • Homestead’s humidity and summer heat make wall and ceiling insulation choice matter more here than in dry climates.
  • Installed kitchen remodel pricing in Homestead: $14,000 – $45,000, with insulation as a line item.
  • Wet or compressed insulation behind kitchen walls should be replaced, not dried and reused.

Which Owens Corning Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Owens Corning’s residential insulation lines fall into three groups that matter inside a kitchen wall: fiberglass batts (the pink-faced and unfaced rolls sold under the EcoTouch and R-series names), blow-in loose fill for attics above the kitchen ceiling, and rigid foam board used as continuous exterior sheathing. If you’re matching an Owens Corning roofing product while a kitchen project touches the roof line, that’s the Duration and Oakridge shingle families, plus the Foundation shingle line for lower-slope porch areas.

To identify what you have, look at three things. First, the facing paper or foil on the batt usually carries the R-value and a manufacturer name printed along the edge; measure the thickness before cutting anything, because compressed batts read thin and get replaced unnecessarily. Second, R-value is stamped on the kraft face about every 12 inches. Third, for attic fill above a kitchen, measure the settled depth with a ruler at four points and compare it to the R-value chart Owens Corning publishes for its loose-fill products.

The OEM-versus-aftermarket decision here is simpler than it is for mechanical parts. Owens Corning fiberglass batts are a commodity spec, so a different brand of the same R-value and same dimensions performs the same, and the foam board or loose fill equivalent works too. What isn’t interchangeable is the R-value and the vapor control detail, and that’s where the money goes wrong. If your Homestead wall cavity was built with a specific batt thickness, going down in R-value to save $60 on a $28,000 kitchen is a bad trade in this climate. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Owens Corning; we match the spec, source the material, and document what goes back in the wall.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Kitchen Remodeling Is Failing

  • Drywall behind the cabinets is soft or stained. That’s water reaching the wall cavity, and once fiberglass batt insulation gets wet it doesn’t recover its R-value even after it dries. The batt has to come out.
  • The kitchen ceiling is hot to the touch in July. Usually compressed or missing attic insulation above the kitchen, which is common where an addition met the original roofline in Homestead homes.
  • Kitchen cabinets smell musty after rain. Often a vapor control gap on an exterior kitchen wall, letting humid air condense inside the cavity instead of on the conditioned side.
  • Visible gaps or voids around outlets and framing. Air moves through those gaps regardless of R-value, and a wall rated R-13 with a two-inch void behaves like a much lower number.
  • Insulation facing is torn, blackened, or falling away from the studs. Facing damage means the vapor control layer is compromised, and the fix is replacement, not tape.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A standing-seam metal roof over a covered porch

Inside a Homestead kitchen remodel, the Owens Corning insulation and envelope portion typically lands between $800 and $2,400 installed, and the full kitchen remodel range is $14,000 – $45,000. What drives the spread: square footage of exterior wall, whether the kitchen ceiling sits under an unconditioned attic (loose fill) or a flat roof (foam board), whether drywall has to come out to reach the cavity, and whether the scope includes air sealing at the top plate and around penetrations. Cabinet installation alone runs $4,000 – $13,000 and countertops $2,000 – $6,500, so insulation is rarely the line item that breaks a budget. It’s the one that gets skipped and then shows up as a mold problem.

Our process for this scope: a written price before any work starts, a written scope that names the R-value and product line, and a photo record of the cavity before it’s closed. If the wall is opened and the scope changes, nothing proceeds until you sign a change order. That’s Clause 1 of the Haven Standard, and it’s why Rowan projects finish within a few percent of the agreed number. The 365-Day Done Right Promise covers the work, and the written warranty goes with the quote.

DIY or Call Us?

What you can safely check yourself: the R-value printed on the batt facing, the settled depth of attic fill above the kitchen, and whether the drywall or cabinet backing shows water staining. Those three checks tell you whether it’s a $60 problem or a $2,000 one.

Where DIY goes wrong in Homestead specifically: vapor control. The insulation is not the hard part. Getting the vapor barrier on the correct side, sealing the top plate, and handling the transition at an exterior kitchen wall is where a homeowner-installed job starts growing mold within one wet season. This isn’t a high-tension or electrical job, so nobody’s getting hurt, but water damage behind a freshly tiled backsplash is expensive to undo. Call (844) 834-4248 and we’ll give you a written price for the insulation and envelope scope before anyone touches your kitchen.

FAQs

A new bay window with a cushioned seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new wood side gate with black hardware

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch