







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Homestead Owner’s Guide
Atlas kitchen remodeling in Homestead runs $14,000 – $45,000 installed, depending on cabinet layout, countertop square footage and whether the plumbing or electrical has to move. A small kitchen remodel lands at $9,000 – $20,000. What fails first in an Atlas kitchen isn’t the cabinets or the stone, it’s the moving parts and the water line: drawer glides that lose their soft close after a few humid seasons, hinges that sag, a cabinet box that swells at the base after a slow supply-line drip. Owners usually discover the problem the day a drawer won’t shut flush, or the morning the cabinet base under the sink feels soft. When the fix is a single part we name it and quote it. When the failure is structural we tell you that honestly and put a written number on the repair before anyone touches a tool. We’re an independent contractor and not affiliated with Atlas.
Key Takeaways
- Atlas kitchen remodeling in Homestead: $14,000 – $45,000 installed; small kitchen $9,000 – $20,000.
- Cabinet boxes, glides and hinges are matchable to an Atlas model by label and measurement; countertops and backsplashes are sourced fresh.
- South Florida humidity is the enemy of particleboard cabinet boxes and MDF drawer fronts, not the stone.
- Every quote is a flat written price with a written scope, delivered before work starts. No work proceeds on a change until the change order is signed.
Which Atlas Models This Applies To

Atlas kitchen cabinetry and component lines aren’t one product; they’re a family of series with different box construction, drawer-glide systems and hinge patterns. The part that fits a mid-line Atlas shaker series almost never fits a premium line, because the glide mount spacing and drawer-box depth change between them. Before we quote a replacement part, we identify your cabinet by reading the label on the back of a drawer box or on the interior of a base cabinet door, and we measure the cabinet opening and the drawer-box depth. That label is the difference between a part that installs cleanly and one that’s returned.
On the OEM-versus-aftermarket question for Atlas specifically: OEM replacement glides and hinges match the original mounting holes exactly, so there’s no re-drilling and no new screw holes showing if the part fails again. Quality aftermarket equivalents from established hardware makers cost less and often last longer, but the mounting pattern may not line up. When the cabinet face is finished, that mismatch is visible. We tell you which route makes sense for your Atlas series, and we name the hardware we’d use rather than describing it in vague terms.
Countertops and backsplashes are a separate sourcing decision. These are set fresh into the kitchen, not matched to an old Atlas model. We source from Cambria, Caesarstone and Silestone for counters, and we’ll name the cabinet line (Atlas, KraftMaid or another vetted brand) when we write the scope so there’s no ambiguity.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
- Drawers that won’t close flush. The glide has lost alignment or the mounting screws have stripped out of the particleboard substrate. In Homestead’s humidity, particleboard swells and its grip on a screw weakens over time.
- Doors that sag or rub at the corner. A tired hinge, or a cabinet box that’s racked out of square. Rubbing at the bottom corner usually means the box itself has moved, not just the hinge.
- Soft, dark or musty cabinet base under the sink. A slow supply-line or drain drip has soaked the cabinet floor. Left long enough, the box swells and crumbles and the fix is a cabinet-floor repair rather than a part swap.
- A gap opening between cabinet and wall. The wall or the cabinet box has shifted. This is common in older Homestead homes where the stud wall and the cabinet weren’t perfectly plumb to begin with.
- Counter seam lifting or backsplash caulk pulling away. The substrate under the counter has moved or taken on moisture. This one means the counter has to come up for a proper repair, not just be re-caulked.
If two or more of those show up together, the cabinet run may be too far gone for parts. We tell you that honestly. When it’s a single failing glide or hinge, we replace the part and leave the rest of the kitchen alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Most Atlas kitchen part-and-repair work in Homestead is quoted as part of the full remodel range, because a failing drawer glide or hinge is rarely the only thing worth addressing. When it is a single part swap, we price it as a small job in the small kitchen range ($9,000 – $20,000), $4,000 – $13,000 for a full cabinet replacement run, $2,000 – $6,500 for countertops, $800 – $2,500 for a backsplash, and $3,000 – $10,000 for an island. The full remodel sits at $14,000 – $45,000 installed.
What drives the range: cabinet line and box construction, square footage of counter, whether plumbing and electrical move, and whether the substrate underneath is sound. Every quote is a flat written price with a written scope, delivered before work starts – never “call for a quote.” No work proceeds on a change until the change order is signed, which is how projects finish within a few percent of the agreed number. The 365-Day Done Right Promise backs the work; if it isn’t done right, we make it right. Background-checked, uniformed technicians and a documented photo record on every visit come standard.
DIY or Call Us?
An owner can safely tighten a loose hinge screw, swap a cabinet pull, or re-caulk a backsplash seam along the counter. What goes wrong on DIY: forcing a glide into a box whose mounting holes have stripped, which splits the particleboard and turns a $40 part into a cabinet-box repair. Or re-seating a counter seam without addressing the damp substrate underneath, so the seam opens again in six weeks. Or cutting into a cabinet box for a new sink without checking where the supply lines and drain run.
None of those will hurt you, but they can cost you a cabinet. If you’re not sure whether the box is sound, stop and call. We’ll give you a straight read on whether it’s a part swap or a bigger repair, and quote the honest number. Call (844) 834-4248 for a free estimate.
FAQs

How long does an Atlas kitchen remodel last in Homestead?
Cabinet boxes and stone counters should run 20-plus years when the substrate stays dry; glides, hinges and caulk lines are the wear items and tend to need attention sooner in South Florida’s humidity, where interior moisture swings stress particleboard and MDF. The stone outlasts the hardware around it. Call (844) 834-4248 for a free estimate on a part swap or a full remodel.
Can you repair the failing part instead of replacing it?
Often yes. A stripped glide screw can be repaired with an insert, a sagging hinge replaced, a loose counter re-seated if the substrate is sound. If the cabinet box has swollen or delaminated, a repair won’t hold and we tell you that plainly. Call (844) 834-4248 and we’ll quote both paths so you can compare.
How long does the swap take?
A single glide or hinge swap is a short job, usually under an hour; a cabinet-floor repair or a counter re-seat is a half-day to a day. A full cabinet run or countertop replacement runs longer and we schedule it in writing with the quote. Call (844) 834-4248 for the exact timeline on your kitchen.
How do you source the Atlas part?
We identify your model from the cabinet label and measurements, then source either OEM hardware for an exact mounting match or a named quality aftermarket equivalent, whichever fits your situation better. We don’t carry parts on a truck; we order to your spec. Call (844) 834-4248 and we’ll confirm the part before it ships.
Ready to put a number on the repair or the remodel? Call (844) 834-4248 for a free estimate. We’ll deliver a written price before any work starts, a written scope, and a documented photo record when we leave – and if something isn’t done right, the 365-Day Done Right Promise makes it right.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












