A Rowan company - serving Homestead, FL
A living room with a wall of new windows and a sliding glass door
Atlas · Homestead

Atlas Windows & Doors in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The Homestead Owner’s Guide

We install and repair Atlas windows and doors across Homestead, and the most common jobs we quote are window replacement ($4,500 – $15,000 whole-home) and impact window installation ($8,000 – $25,000). If a single unit has failed, you’re usually looking at a much smaller repair. Owners typically find the problem one of two ways: a door that suddenly drags on one corner, or a window that won’t seat against its frame after the first big summer storm. The hardware and weatherstripping usually gave out months before the homeowner noticed.

Call (844) 834-4248

We’re an independent contractor, not affiliated with Atlas, but our technicians have up to 19 years of experience matching parts to Atlas product lines.

Key Takeaways

  • Most Atlas failures in Homestead are hardware, weatherstripping, or glazing seal, not the frame itself.
  • OEM parts matter most for the lock and hinge systems, less so for gaskets and sweeps.
  • Impact-rated units need impact-rated replacement glass, not a standard retrofit.
  • Written price before work starts, always.

Which Atlas Models This Applies To

New double-hung windows in a dining room

Atlas has made windows and doors across a wide range of series lines over the decades, and the part you need depends entirely on which series you have. The identifying label is usually on the window sash edge or the interior jamb of a door – a sticker with a model number and a date. If the label is gone, we measure: glazing thickness, frame profile depth, and hardware hole spacing all narrow it down. Bring us a photo of the label if you have one, and the measurement of the part that failed.

Here’s where owners get burned. The lock set on an older Atlas sliding door often uses a different screw pattern than the current replacement part, and a “will-fit” aftermarket latch will mount, but it won’t engage the keeper cleanly. For lock and hinge parts, we lean OEM. For weatherstripping, sweeps, and glazing gaskets, a quality aftermarket equivalent is usually fine and considerably cheaper, often $20 – $60 for a door sweep versus $80 – $140 for the OEM piece. The compatibility gotcha to check: impact-rated Atlas units in Florida carry a product approval number tied to the glass, not just the frame, and swapping the glass on an impact unit for non-rated glass voids that approval.

We also work with KraftMaid, Cambria, and Silestone on the interior side when a window or door project turns into a cabinet or countertop job at the same time.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

  • Water pooling on the sill after rain. The glazing gasket or the weep-hole drainage path has failed, so water that should exit the frame is backing up inside.
  • The door drags on the strike side. A hinge or roller has worn, or the frame has settled slightly – common in older Homestead homes built on slab where the soil moves.
  • Fogging between the glass panes. The insulated glass unit’s seal broke and moisture got in. The frame is fine; the glass needs replacing.
  • The lock won’t catch, or catches hard. The latch or keeper is misaligned or worn, and the door isn’t fully sealing against the weatherstripping.
  • You can feel air at the edges on a windy day. The weatherstripping has compressed or torn, letting wind and, in a hurricane, water pressure through.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

For a single failed window or door part, the honest installed range in Homestead runs from around $150 for a door sweep or weatherstripping replacement up to $600 – $1,200 for a full insulated glass unit swap on a larger window or sliding door. A full window replacement, when the whole unit is beyond a part, is $4,500 – $15,000 for the home, and impact windows run $8,000 – $25,000.

What drives the spread: glass size and whether it’s impact-rated, the series of your unit (older lines use parts that are scarcer), and whether the frame itself needs repair. We write the price before anyone picks up a tool – a flat number for parts and labor, in writing, with a written scope and a written warranty. No work starts on a change until a change order is signed. Our 365-Day Done Right Promise backs every install: if it isn’t done right, we make it right. And every visit includes a documented photo record of what we found and what we replaced.

DIY or Call Us?

Some things you can safely check yourself. Look at the label, photograph it, feel along the edges of the door for drafts, and run a finger along the sill for standing water after a storm – that’s diagnosis, not repair, and it’s useful information for us.

Where DIY goes wrong with Atlas units: impact-rated glass. That glazing is heavy, it’s mounted in a frame under specific compression, and installing it wrong means the unit may not hold under wind load, which is a safety issue and a code issue in Homestead. Lock and hinge hardware on a heavy sliding door is also awkward to align without the right tools, and a misaligned keeper is how doors get damaged. For those, call us. Bring us a photo of the label and the failure and we’ll tell you what the part is and what it costs before you commit. Call (844) 834-4248 to schedule a free estimate – we’ll review any written estimate line by line at no charge.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new wood side gate with black hardwareA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roof

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch