







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Roofing: The Homestead Owner’s Guide
Tamko roofing in Homestead typically costs $600 – $2,500 for a targeted repair or $8,000 – $20,000 for a full replacement, and we can usually assess a failing roof within a day or two of your call. Tamko shingles are common on South Florida homes, and owners usually discover a problem the same way: a brown water stain blooms on a bedroom ceiling after an afternoon storm, grit from worn shingles collects in the gutters, or a neighbor mentions the faded, curling tabs on the south-facing slope. That south side takes the worst of the Homestead sun, and it usually fails years before the rest of the roof.
We’re Rowan Construction Group, an independent contractor and not affiliated with Tamko. What we bring to a Tamko roof is knowing the product line, the way it weathers in Miami-Dade County heat, and the honest price to fix it before the next rainy season.
Key Takeaways
- Tamko repairs in Homestead run $400 – $1,800; full replacements run $8,000 – $20,000.
- South-facing slopes in Homestead degrade fastest because of sustained UV exposure.
- We match Tamko shingle profiles and colors to your existing roof, documented in photos.
- Never a “call for a quote” – the written price comes before any work starts.
Which Tamko Models This Applies To

Tamko’s residential line splits into three families you’ll find on Homestead roofs: the laminated architectural shingles (Heritage and Heritage Vintage), the traditional three-tab lines, and their metal and modified-bitumen products. Most homes here carry an architectural shingle, and the exact profile matters. Heritage and Heritage Vintage are both architectural laminates, but their tab widths and shadow lines differ, which means a repair patch from the wrong series will show as a visible seam. Match the series before you order anything.
To identify what’s up there, check the attic for a bundle wrapper or the original permit paperwork, or measure a shingle tab and compare it against the manufacturer’s specification sheet. Color and profile names also appear on the inside of the bundle, which a roofer often leaves in the attic near the access hatch. On the OEM-versus-aftermarket call for a Tamko roof: for a spot repair, a matching-profile shingle from a quality manufacturer works and saves money, but if you’re patching an exposed field or matching a discontinued color, staying with the genuine Tamko profile keeps the repair invisible. We source both, and the written quote names which one we’re using and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Roofing Is Failing
- Curling or clawing tabs. The shingle edges lift and cup as the asphalt dries out under UV. In Homestead this shows up on the sun-exposed slopes first, often well before the rest of the roof.
- Granule loss. You find a sandy grit in the gutters and at the base of downspouts. That’s the protective mineral layer wearing away, which leaves the asphalt underneath exposed to the sun.
- Bruising after a storm. Hail or wind-driven debris knocks the mat loose from the shingle base. The impact spot looks soft and dark, and it’s the start of a leak.
- Ceiling stains or attic moisture. Brown rings on drywall or damp sheathing point to a breach uphill from the stain, not directly above it. Water travels along the deck before it drips.
- Lifted or missing shingles at the ridge and eaves. Wind gets under the edge first. Once a shingle tears free, the ones around it take more load and start to go too.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Homestead, a Tamko roof repair runs $400 – $1,800 depending on how much decking is involved and whether the leak has reached the sheathing. A full replacement runs $8,000 – $20,000. The range moves with square footage, the number of roof penetrations (vents, skylights, chimney flashing), whether the old layer has to be torn off, and how much rotten decking we find once the shingles are up. Metal roof installation, if you’re weighing an upgrade, runs $15,000 – $40,000.
Every quote is a flat written price with a written scope before work begins. Layered shingles, new underlayment, flashing, and disposal are all in the line items – no surprises once the tear-off starts. Under Clause 1 of The Haven Standard, no work proceeds on a change until the change order is signed. The work carries our 365-Day Done Right Promise: if it’s not right, we make it right, backed by a written terms page rather than an asterisk.
DIY or Call Us?
Some things you can safely check yourself: look at the roof from the ground with binoculars for missing or lifted shingles, inspect the attic for damp sheathing and daylight, and clear leaves from the gutters so you can see granule loss. What we’d steer you away from is climbing onto a pitched roof to patch a shingle. Roofing is at height, Florida heat makes the surface slippery, and a fall is serious. Patching also usually makes a small leak worse when the existing sealant isn’t prepped correctly.
If you want a straight answer on whether your Tamko roof needs a repair or a replacement, call (844) 834-4248. We’ll look, take photos, and hand you a written price. Estimates are free.
FAQs

How long does a Tamko roof last in Homestead? Most architectural shingles hold up 20 to 25 years in a moderate climate, but in Homestead’s sun and salt air, expect the south and west slopes to need attention around 12 to 18 years. The rest of the roof often outlasts those sun-facing planes. Call (844) 834-4248 for a free inspection of your specific roof.
Can my Tamko roof be repaired instead of replaced? Often yes, if the damage is confined to one slope or a few field shingles and the decking underneath is sound. A $400 – $1,800 repair makes sense when the leak is localized; a full replacement becomes the honest call once granule loss and curling cover most of the roof. We’ll tell you which one the damage supports.
How long does a Tamko repair take? A targeted repair is usually a few hours on site, weather permitting, and most owners get their written estimate the same week they call. A full replacement takes longer and we schedule it in writing before the crew arrives. Call (844) 834-4248 to get your roof on the schedule.
How do you source the right Tamko shingle for my roof? We identify the series and color from the bundle wrapper, permit records, or a field measurement, then source a genuine Tamko match or an equivalent profile, and the written quote states which. We don’t carry parts on a truck – the material is ordered to your roof. Curious about our range in other trades? We also work with KraftMaid, Cambria, and Silestone for interior projects.
Whether it’s a single leaking slope or a full Tamko roof replacement, the first step is the same: a look, a photo record of what we find, and a written price before anyone picks up a tool. Call (844) 834-4248 for a free estimate. You’ll get the number in writing, a live person on the line, and a documented record when the crew leaves.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












