







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Homestead Owner’s Guide
If you’re dealing with a failing Boral roof in Homestead, the fix usually depends on which layer failed. A failed seal or a cracked concrete tile is a repair in the $400 – $1,800 range. A roof that has lost most of its tile field to storm or age runs $8,000 – $20,000 for a full replacement. We’re an independent contractor, not affiliated with Boral, and we install Boral-compatible materials and match systems to the product already on your roof.
Owners in Homestead usually find the problem after a heavy rain band pushes through. Water marks appear on a ceiling near an exterior wall. A tile slips out of course on the slope facing the street. Granules pile up in a valley or at the bottom of a downspout. If you’ve had a Boral tile or shingle roof for years, you’ve probably noticed one of these already.
What follows is what we’ve learned from looking at Boral roofs across Homestead: the models involved, the symptoms, the real numbers, and what to check before you call anyone.
Which Boral Models This Applies To

Boral makes two product families that show up on Homestead homes: the concrete roof tile lines (you’ll see markings on the back of the tile or on the starter row, and profiles that run from flat S-tile to barrel and low-profile shingle-style tile) and the Boral Steel stone-coated metal lines for the pitched-roof segment. The two don’t share parts. A concrete tile system has a different underlayment stack than a stone-coated metal panel, and a stone-coated metal system uses different fasteners and different trim profiles.
Identifying what’s on your roof takes ten minutes and a ladder you don’t have to climb. Look at the profile from the ground: a Boral barrel tile has a distinct high/low curve. A Boral low-profile tile is nearly flat and interlocks tightly. Check the paperwork the prior owner left in the folder you were handed at closing: the tile spec sheet will list a product name and a color code. If you don’t have it, one phone photo from the street and one close-up of a broken tile is usually enough for us to identify the family on arrival.
The OEM versus aftermarket decision for Boral comes down to color and interlock fit. Boral color lots shift by production year, so a new tile in a fresh batch rarely matches a sun-faded 2012 roof perfectly. We’ll tell you that before you sign, and we’ll show you a sample against the existing field. Some owners accept the difference; some choose a full slope replacement to get a consistent face. The right answer depends on how visible the slope is and how much of the field you’re replacing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Hairline cracks across several tiles in one area. Concrete tile is hard but brittle. Cracks that form in a cluster usually mean something below the tile has shifted or the fastener has worked loose.
- Granule loss on stone-coated metal. Granule loss on a Boral Steel panel shows up as bare metal patches in a stone-coated finish. Once the coating wears, the panel is exposed to UV and salt air, and the clock starts on corrosion.
- Water stains on the ceiling or along an exterior wall. A stain after rain means the underlayment has likely failed even if the tile above looks intact. The tile sheds the water; the underlayment is the actual barrier. On a Homestead roof, a failing underlayment is more common than a failing tile.
- Lifted or missing tiles after a storm. Missing tile is easy to see; a lifted tile that’s about to go is not. After a wind event, walk the yard perimeter and count how many tiles you find. Two is routine; ten means an inspection.
- Moss or algae in shaded areas. South Florida humidity and shade from the oak canopy common in older Homestead neighborhoods create a growing surface. It’s not always structural, but it traps moisture against the underlayment and shortens its life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Homestead, the numbers run like this. A targeted tile or repair job runs $400 – $1,800 for a roof repair, and $600 – $2,500 for tile roof repair work involving tile replacement and matching. A full roof replacement runs $8,000 – $20,000 on a standard single-family home. A metal roof installation, including a Boral Steel stone-coated system, runs $15,000 – $40,000 depending on pitch and total square footage.
| Scope | Installed Range |
|---|---|
| Roof repair | $400 – $1,800 |
| Tile roof repair (matching and replacement) | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: the square footage, the pitch, whether existing tile can be re-used, whether the underlayment needs full replacement, and how many layers come off. Our written quote breaks the parts, the labor, and the disposal into separate lines, so you can compare it against any other quote line by line. Under the 365-Day Done Right Promise, if the finished work doesn’t hold, we come back and make it right.
DIY or Call Us?
There’s a safe version of checking your own roof. From the ground, look at the profile, count missing tiles, and photograph stains on ceilings from inside. If you can see the flashings from a window, note whether the caulking is cracked or intact. That’s the boundary.
What you should not do yourself: walk a tile roof, especially after rain. Boral concrete tile is unforgiving underfoot and cracks under a misplaced step. On a pitched metal roof, the fall risk is the fall risk. And underlayment replacement, the most common actual fix, means pulling the tile field, which is the work.
Call (844) 834-4248 for a written estimate. Our technicians have up to 19 years of experience on tile, shingle, and metal systems, and every visit comes with a documented photo record of what we found before we touch anything.
FAQs

How long does a Boral roof last in Homestead? A installed Boral concrete tile roof typically performs for a long service life, and Boral’s own product documentation is the source for that number. In Homestead, the practical limit is usually not the tile; it’s the underlayment below it. UV, salt air, and summer rain wear the underlayment years before the tile itself gives out. Call (844) 834-4248 for a free inspection before you assume a full replacement.
Can it be repaired instead of replaced? In most cases, yes. A single slipped tile, a cracked field tile, a flashing failure, or a localized underlayment failure can be repaired without touching the rest of the roof. The line to watch is how much of the field is affected. If the failure is localized, a repair in the $400 – $1,800 range is usually enough. Call (844) 834-4248 and we’ll tell you which side of that line your roof sits on.
How long does the swap take? A tile repair or a replacement of a single area is often a one-day job. A full roof replacement on a standard Homestead home runs several days depending on square footage, pitch, and how many layers of existing material come off. You’ll get the number in writing before we start, and no schedule change happens without your signed change order.
How do you source the part? We source through the manufacturer channel and through our network of vetted suppliers, and we match the product family and profile to what’s already on your roof. We don’t claim to carry inventory; the part is ordered against your specific roof, and we bring a sample for your approval before install. If you have a competitor’s quote for the same work, we’ll review it line by line at no charge.
Boral roofing work in Homestead is one of seven trades we handle, alongside kitchens (KraftMaid cabinets, Cambria and Silestone countertops), bathrooms, windows and doors, fencing, driveways and pavers, and home additions. If you need a written price on your Boral roof before anyone picks up a hammer, call (844) 834-4248 today for a free estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












