







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Homestead Owner’s Guide
We install Boral-compatible kitchen remodeling in Homestead, and most full kitchens run $14,000 to $45,000 installed, with cabinetry, counters, backsplash and island work each quoted as a written line item before anything is ordered. Smaller kitchens land at $9,000 to $20,000. Rowan Construction Group Homestead is an independent service provider, not affiliated with Boral.
Owners usually call us after the same three things: a cabinet door that has swollen and stopped closing flush after a wet summer, a countertop seam near the sink that has gone dark, or a backsplash tile popping loose above the cooktop. In Homestead’s humidity, those failures show up fast, often within a season of a prior install. What follows is how we identify the right Boral product for your kitchen, what the replacement really costs, and where your own inspection should stop.
Which Boral Models This Applies To

Boral makes several distinct kitchen products, and the part that failed determines everything downstream. The common lines you’ll find in a Homestead kitchen are Boral engineered stone and quartz surfacing for counters and islands, Boral cabinet and door components, and Boral backsplash and wall tile. Each has its own series naming and thickness specs, and mixing a counter part from one line into another is where most mismatched orders come from.
To identify what you have, look in three places. First, the cabinet interior door or the underside of a drawer box often carries a manufacturer label with a series code. Second, countertops: pull a drawer and check the front edge of the slab or the fabricator’s sticker on the cabinet sidewall. Third, measure. Boral counter stock typically runs in set thicknesses, and a caliper reading of 20mm versus 30mm tells you which fabrication spec applies before you order anything.
On OEM versus aftermarket: for Boral surfacing, a quality aftermarket fabricator can match the stone and cut a replacement section, but the color lot may not match your existing slab. That’s a real compatibility gotcha, and it’s why we photograph the existing counter under your actual kitchen light before quoting. For Boral cabinet hardware and door components, the OEM part is almost always the right call because hinge and glide mounting patterns changed across series.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
- Cabinet doors that swell and stick after rain season. In Homestead, the humidity cycle between June and October pushes moisture into any door edge that wasn’t sealed properly at install. A door that closes tight in January and drags by August is telling you the substrate is absorbing water.
- Dark seams or cloudiness at counter joints. A seam near the sink that turns dark is usually failed adhesive, and water is getting under the edge. Left alone, that’s how a small seam becomes a cracked slab.
- Backsplash tile lifting above the cooktop. Heat cycling plus a thin or skipped thinset layer causes tile to tent and release. If you can press a tile and hear a hollow sound, the bond is already gone.
- Island top rocking or a gap at the cabinet line. That’s usually a failed support or an uneven substrate, not the slab itself. Overtightened fasteners or a shifting floor are the usual culprits.
- Drawer glides that grind or pull out crooked. On Boral cabinet components, glide mounting screws back out over years of a heavy drawer. Once the screw holes strip, the glide has to be re-anchored, not just tightened.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Boral-compatible kitchen work runs in Homestead, quoted as a flat written price with a written scope before any work starts:
| Scope | Installed price |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by slab size and edge profile, cabinet count and door style, and whether tile has to come off a wall before new material goes on. Parts and labor are both on the line item, so you can see exactly what the Boral-compatible material costs and what the install costs. Every job carries our 365-Day Done Right Promise: if it isn’t done right, we make it right. We don’t stock parts or carry them on a truck; we source the specific Boral-compatible product for your kitchen, and you get a documented photo record of what we found and what we installed.
DIY or Call Us?
You can safely check a few things yourself. Open and close every cabinet door and note where it drags. Run a finger along counter seams and feel for a lip or a soft spot. Tap backsplash tiles with a screwdriver handle and listen for hollow spots. Write down any series code you find and photograph it.
Where DIY goes wrong is at removal and re-anchoring. Pulling a Boral counter section without bracing the cabinets can crack the adjacent slab, and re-setting tile over a failed thinset bed without addressing the substrate just buys you the same failure in a year. Cabinet glide re-anchoring that skips the stripped hole is the classic repeat call. Our technicians have up to 19 years of experience with these exact materials in South Florida humidity. If you’re not sure what you’re looking at, call (844) 834-4248 and we’ll tell you honestly whether it needs a part or a repair.
FAQs

How long does Boral kitchen material last in Homestead? A properly installed Boral counter easily sees 15 to 20 years, but cabinet doors and backsplash bonds in Homestead’s humidity often show wear in 7 to 10 years without good sealing and ventilation. Lifespan here is a sealing and airflow story more than a material story. Call (844) 834-4248 for an exact quote on your kitchen.
Can it be repaired instead of replaced? Often yes. A single failed seam can be re-adhered, a stripped glide re-anchored, and a few lifted tiles re-set without replacing the whole run. We’ll tell you on site whether repair is honest or just delaying a replacement. Estimates are free.
How long does the swap take? A backsplash re-set is typically one to two days. A countertop replacement runs two to three days once the slab is cut. A full cabinet and counter swap runs one to two weeks. We put the timeline in the written scope so you know before you commit.
How do you source the Boral-compatible part? We identify your series from the label and the measured thickness, then order the matching product through our vetted supplier network rather than substituting a lookalike. You get the part description and the photo record in writing. We also work with KraftMaid, Cambria and Silestone if a match is better served elsewhere.
Call (844) 834-4248 for a free estimate. We answer with a live person 24/7, and our technicians are background-checked and uniformed. Bring a competitor’s written quote and we’ll review it line by line at no charge under our Free Second Opinion offer, because the price gets written before anyone starts.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












