







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Homestead Owner’s Guide
We install and repair PGT-compatible roofing components across Homestead, and an installed roofing repair typically runs $400 – $1,800, with full roof replacement at $8,000 – $20,000. Storm-driven inspection is available by appointment, and repairs are usually scheduled within a day or two of the free estimate. Owners most often discover the failure the same way: a ceiling stain that shows up after a Homestead afternoon downpour, a lifted roof-to-wall flashing, or granules collecting in the gutter after a windy week.
PGT is a Florida brand, so its impact-rated windows and door assemblies are common in Homestead homes built or hardened for wind-borne debris protection. Roofing ties into that system at the wall flashing, the soffit, and the roof-to-wall connection. When those details fail, the leak shows up indoors long after the damage started.
Which PGT Models This Applies To

PGT makes windows and doors, not shingles, so “PGT roofing” in a Homestead context means the roof work that surrounds and protects a PGT window or door opening: wall flashing, head flashing over the frame, soffit and fascia transitions, and the roof-to-wall sealant line. The relevant model lines are PGT’s WinGuard impact window and door series, which appear in thousands of Homestead homes. Identify your assembly by the glass label in the corner of the pane (it carries a manufacturer code and impact rating) and by measuring the rough opening, not the visible frame. That distinction matters because the flashing dimensions are built to the rough opening.
On the OEM-versus-aftermarket question for PGT specifically: use OEM flashing and frame components when the opening is a PGT WinGuard assembly and the original profile is still available, because the lap and seal geometry is engineered to the frame. For the roof covering itself, quality aftermarket shingles and underlayments (we source GAF and Owens Corning) are the honest answer. We are an independent service provider, not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
- Water staining at the window head or ceiling corner near a PGT opening. Head flashing has failed or was never lapped correctly, so driven rain runs behind the frame. It rarely shows on the roof surface; it shows on drywall.
- Lifted or peeling sealant along the roof-to-wall line. Homestead’s sun bakes sealant faster than almost anywhere in the state. Once the bead cracks, wind-driven rain finds the gap.
- Granule loss in the gutters after a storm. Shingle granules shed early when the mat is heat-aged. A handful in the gutter after a windy week is normal; a pan full means the shingle layer is near end of life.
- Soft or discolored soffit panels. Soffit is the underside vent panel at the eave. When it stays wet, it swells and stains, which points to a blocked vent path or a roof edge that isn’t shedding water.
- Daylight visible at a ridge or valley from inside the attic. That’s a gap, not a vent. It lets wind-driven rain and insects in, and it usually traces to a failed flashing or a shifted panel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Homestead, roof repair runs $400 – $1,800, tile roof repair $600 – $2,500, and full roof replacement $8,000 – $20,000. Metal roof installation runs $15,000 – $40,000. The range is driven by roof area, pitch, the number of penetrations and flashings, and whether the existing layers must be torn off first.
Every quote is a flat written price with a written scope before any work starts. The scope lists the tear-off, underlayment, flashing, and the warranty on the work, line by line. No change proceeds until a signed change order exists under the Haven Standard. The 365-Day Done Right Promise covers the work, and every visit comes with a documented photo record as a standard deliverable.
DIY or Call Us?
You can safely check granule loss in the gutter, look for ceiling stains, and confirm the glass label on a PGT window. What you shouldn’t do yourself is climb a pitched roof in Homestead heat to reflash a wall connection or pull shingles at a valley. Roof work at height is where falls happen, and a bad flashing lap can hide a leak until the decking rots. That’s a genuine safety issue, not a scare tactic. Call (844) 834-4248 for a free estimate and a written price.
FAQs

How long does roofing last in Homestead? A standard asphalt shingle roof lasts about 15 – 20 years in South Florida’s sun and storm exposure, shorter than the national average because of heat and wind-driven rain. Tile and metal last considerably longer. If you’re near the 15-year mark, call (844) 834-4248 for a free estimate.
Can it be repaired instead of replaced? Often, yes. A localized leak at a flashing, vent, or valley is usually a repair in the $400 – $1,800 range, not a replacement. We tell you which one you actually need after inspecting the deck and flashings, and an exact quote is free.
How long does the replacement take? A typical Homestead roof replacement takes one to three days depending on size, pitch, and weather. Flashings and underlayment inspections add time on complex roofs. Call (844) 834-4248 to schedule your free estimate and a firm timeline.
How do you source the part? OEM flashing and frame components for PGT WinGuard openings where the profile is still available, and vetted roofing materials from GAF and Owens Corning for the covering. We also handle KraftMaid, Cambria, and Silestone selections as part of a whole-home scope. Estimates are free.
Call (844) 834-4248 for a free estimate and a written price in Homestead, with a documented photo record on every visit.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












