







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Homestead Owner’s Guide
We install and service CGI-compatible windows and doors in Homestead, and the most common jobs run $4,500-$15,000 for a multi-unit window replacement, $8,000-$25,000 for impact window installation, and $800-$3,000 for a single door or glass unit swap. Those are installed prices, parts and labor together, not a parts counter figure with the real cost hidden behind it. Most Homestead owners find us the same way: a window that won’t latch shut before a storm, fog between the panes on a west-facing unit, or a patio door that grinds and drags on its track after a wet season. The part failed quietly months ago. The symptom just showed up.
Which CGI Models This Applies To

CGI makes several window and door lines that turn up across South Florida homes, and matching the right replacement part depends on identifying three things: the product line stamped on the frame or etched in the glass corner, the rough opening dimensions, and the glass spec, because impact-rated and non-impact units in the same series use different glazing and different hardware. Pull the manufacturer label off the frame jamb first; if it’s gone, look for the etched code in the glass corner, which gives you the series and the glass make-up. That code is what tells us whether you’re working with a single-hung, horizontal slider, casement, or a sliding glass door, and whether the original unit was built to Miami-Dade product approval or a lesser spec.
On the OEM-versus-aftermarket question, CGI-specific hardware (operators, rollers, lock sets, balances) is worth matching exactly when the unit is under its original warranty or when the failure is at the frame interface. For a fogged insulated glass unit or a worn roller on an older slider, a quality aftermarket equivalent built to the same dimensions and glass spec does the job for less, and we’ll tell you which side of that line your part falls on. Rowan Construction Group Homestead is an independent service provider and not affiliated with CGI, so our recommendation is based on what the part needs, not a brand program.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
Here’s what a failing CGI window or door in Homestead actually looks like, and what’s behind each symptom:
- Fog or condensation trapped between panes. The sealed insulated glass unit has lost its argon and its seal, which means the edge spacer or the perimeter sealant failed. Once moisture is inside, the glass can’t be re-dried; the unit gets replaced.
- The window won’t latch or locks loosely. Either the keeper has shifted or the sash has warped from heat cycling, common on southwest-facing units that take the afternoon sun through a Homestead summer.
- A slider or patio door that grinds, sticks, or jumps the track. The rollers have flat-spotted or the track has filled with grit and salt-laden debris. A worn roller left alone scores the aluminum track, which turns a cheap part swap into a track replacement.
- Water staining or soft wood at the sill or frame corner. The perimeter seal or weep system isn’t draining, so water sits against the frame. In Homestead’s wind-driven rain, a compromised seal shows up fast.
- Impact glass that’s cracked, chipped, or delaminated at the edge. An impact unit is a laminated assembly; once the interlayer or edge is compromised, the unit no longer holds its rating and needs replacement, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Homestead, parts and labor together, look like this:
| Job | Installed price range |
|---|---|
| Single window or glass unit swap | $800-$3,000 |
| Multi-unit window replacement | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
The range is driven by four things: the number and size of units, impact versus non-impact glass, frame material (vinyl, aluminum, or wood-clad), and whether the rough opening needs repair once the old unit comes out. Every quote we write is a flat written price with a written scope before work starts, so the number you agree to is the number you pay unless you sign a change order for something unforeseen. The 365-Day Done Right Promise backs the installation, and crews are background-checked and uniformed; every job closes with a documented photo record of what we found and what we put in.
DIY or Call Us?
Some of this is safe for an owner to check. You can confirm the label and etched code, measure the rough opening, and clean and inspect a slider track. What we don’t recommend is removing and resetting a sealed glass unit, re-hanging a patio door on new rollers, or replacing an impact unit yourself. The glass is heavy and fragile, impact units are load-path critical in a storm, and a unit reinstalled off-square leaks at the perimeter no matter how good the sealant. That’s where DIY goes wrong and where a trained installer earns the call. If you’re unsure whether your part needs a swap or a repair, call us at (844) 834-4248 and we’ll tell you straight.
FAQs

A well-installed CGI window or door typically gives 20-25 years, but in Homestead’s sun, salt air, and wind-driven rain, the sealed glass unit is usually the first thing to go, often at the 10-15 year mark on west-facing units. Frame and hardware can outlast the glass by a decade.
Sometimes. Hardware, rollers, operators, and locks are repairable; a fogged or delaminated insulated glass unit is not, and neither is a cracked impact pane. We’ll tell you which category your part is in before quoting. Call (844) 834-4248 for an exact quote – estimates are free.
A single window or glass unit swap is typically a few hours; a multi-unit replacement runs one to three days depending on count and whether the rough opening needs repair. We schedule it as one job with a scope in writing, not a series of return visits.
We identify the CGI series from the frame label or glass etch, match the dimensions and glass spec, and quote either OEM-equivalent or quality aftermarket hardware, whichever fits the unit and your budget. Written price and scope before work starts, every time.
If you’re in Homestead and a CGI window or door has failed, don’t wait for the next storm to test it. Call (844) 834-4248 for a free estimate and a written price you can compare line by line. We’ll tell you exactly which part failed, what it costs to replace, and what the work includes.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












