







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The Homestead Owner’s Guide
We install and repair CGI-compatible roofing in Homestead, and a standard roof replacement typically runs $8,000 – $20,000 installed, with individual repairs at $400 – $1,800. When a CGI roof goes bad, most Homestead owners find out the same way: a brown ring spreads across a ceiling near an interior wall after a heavy afternoon storm, or they spot granules piling up in the gutter on the driveway side of the house. Sometimes it starts with a shingle edge curling up along the west elevation where the summer sun hits hardest. The part has failed before the leak announces it.
We’re an independent service provider. Rowan Construction Group Homestead is not affiliated with CGI, and we don’t stock or ship parts from a truck. What we do is match the right system to your home, quote a written flat price before anyone climbs a ladder, and put a documented photo record in your hands when we’re done.
Key Takeaways
- CGI-compatible roof replacement in Homestead: $8,000 – $20,000 installed.
- Targeted repairs: $400 – $1,800, depending on the failure and how much decking is involved.
- Metal systems, where the home calls for one: $15,000 – $40,000.
- Tile repairs on CGI-style profiles: $600 – $2,500.
- Every job starts with a written scope and flat price. Free second opinion on any competitor quote.
Which CGI Models This Applies To

CGI manufacturing spans several product families, and the first thing we establish is which one is on your roof. Some CGI profiles are asphalt-based shingle systems; others are the metal panel and stone-coated lines. Spray-foam and tile-adjacent products also appear under related brand families. The spec sheet on your original install paperwork, if you have it, names the product line and the manufacturer. If you don’t, we measure it. Panel width, shingle tab spacing, and the printed label on the back of a loose tab or panel edge identify the family for certain.
That identification matters because the compatibility window is tighter than most owners expect. A stone-coated CGI panel from one production run won’t always align cleanly with a panel from another. Fastener spacing, batten height, and the underlayment rated for the assembly all shift by family and, in some cases, by lot. We pull the measurements before we order, and we tell you what we found in plain terms.
On the OEM-versus-aftermarket question, our answer is the same one we give on cabinets and countertops: match the spec, not the label. Original CGI parts are the safest fit where the profile and color are still in production. Where they aren’t, a quality aftermarket equivalent built to the same wind rating and profile works fine, and we’ll show you the spec sheet side by side with the OEM before you decide. The wrong move is a generic shingle dropped over a CGI panel assembly. It leaks at the transition, and it fails inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Roofing Is Failing
- Granule loss in the gutters. Asphalt-based CGI shingles shed granules as they age, and heavy granule accumulation in the gutter means the protective surface is breaking down. In Homestead’s humidity, once the granules are gone, the mat underneath is exposed to UV and moisture together.
- Curling or lifted edges on the sun-facing slope. South and west elevations in Homestead take the afternoon heat, and your CGI panels or tabs will lift there first. A lifted edge is a wind-entry point on the next named storm.
- Ceiling stains and attic moisture. A brown ring on the drywall near an exterior wall usually means water is getting in at a flashing or panel joint, not through the shingle face. The stain is the visible symptom; the flashing is the cause.
- Loose or missing fasteners on metal CGI panels. Salt air and wind vibration work fasteners loose, and a panel that’s not fastened tight lifts and cracks at the seam. We see this especially on roofs older than fifteen years on the barrier-island side.
- Rust at cut edges and penetrations. Coastal humidity accelerates corrosion on any bare metal edge or penetration collar. Once rust starts at a cut, the seam is compromised, and the repair needs to address both the edge and the water path behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Roof work in Homestead runs higher than inland Florida because of wind-mitigation requirements, humidity, and the salt exposure on the eastern side of the county. Here’s what a written quote from us looks like in dollars.
- Full CGI-compatible roof replacement: $8,000 – $20,000 installed.
- Targeted CGI roof repair: $400 – $1,800.
- Metal panel system where the profile calls for it: $15,000 – $40,000.
- Tile repair on CGI-style tile profiles: $600 – $2,500.
The range is driven by roof square footage, the number of layers being removed, decking condition once the old roof is off, and whether the assembly needs upgraded underlayment for wind rating. We list parts and labor as separate lines on the quote. If we find soft decking under the old shingles, that’s a change order, and no change proceeds without your signature. The written warranty comes with the quote, and the 365-Day Done Right Promise backs the work.
DIY or Call Us?
Checking your roof from the ground is safe and useful. Look for lifted edges, granule accumulation in the gutters, dark streaks on the decking from below, and rust at any penetration you can see from a ladder you don’t climb. Photograph it.
Repairing the roof itself is not a safe owner job in Homestead. Steep-slope work at height, particularly after a wet night, is where the serious injuries happen, and a bad repair on a CGI assembly can void a wind-mitigation credit your insurer is counting on. We send background-checked, uniformed technicians, and every visit includes a documented photo record as a standard deliverable, not an upgrade. Call (844) 834-4248 to schedule a free estimate, and we’ll review any competitor quote line by line at no charge.
FAQs

A CGI asphalt shingle system typically lasts fifteen to twenty-five years in Homestead’s climate, shorter than the national average because of UV intensity, salt air, and hurricane-season wind. Metal CGI systems often run longer, in the thirty-to-fifty-year range, with maintenance on fasteners and cut edges being the deciding factor. If your roof is past the fifteen-year mark on the east side of the county, an inspection is worth the trip.
Yes, when the failure is localized. A flashing issue at one penetration, a few lifted panels, or a single valley that’s washing out is a repair, typically $400 – $1,800. When granules are gone across most of the field, or when the decking is soft in more than one area, a repair is throwing money at a system that’s already failed. We tell you which one you’re looking at, in writing, before any work starts.
A typical residential CGI roof replacement in Homestead runs two to four days of install time, weather permitting. The written quote names the schedule and the scope before the first day, and if the decking forces a change, that change is a signed change order, not a surprise line on the final bill. Rain days in the summer can push the schedule; we tell you that up front, not the morning of.
We match the profile and spec first, then source either the OEM CGI part or a quality aftermarket equivalent built to the same wind rating, depending on what’s in production and what the assembly requires. You see the spec sheet and the price line before you commit. Our sourcing works across a range of vetted brands, including GAF and Owens Corning for shingle systems, the same way we work with KraftMaid, Cambria, and Silestone on interior projects. Call (844) 834-4248 for an exact quote. Estimates are free.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












