







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Homestead Owner’s Guide
ES Windows-compatible bathroom remodeling in Homestead runs $9,000 – $28,000 for a full bathroom and $5,000 – $12,000 for a small one, quoted as a flat written price before any work starts. Most Homestead owners discover the problem the same way: the seal around the ES Windows unit in the shower or window wall fails after a few wet seasons, and the drywall beside it starts to feel soft. We replace the failing component, address the moisture damage behind it, and finish the trim and waterproofing to match the existing ES Windows footprint.
Key Takeaways
- Full bathroom remodel for an ES Windows home in Homestead: $9,000 – $28,000.
- Small bathroom remodel: $5,000 – $12,000. Walk-in shower: $4,500 – $12,000.
- We source ES Windows-compatible parts and fixtures, never stock or truck parts.
- We are an independent service provider and are not affiliated with ES Windows.
- Every visit includes a documented photo record at no extra charge.
Which ES Windows Models This Applies To

ES Windows is a South Florida window and door fabricator, and their bathroom-adjacent products (fixed windows over showers, awning and casement units in wet walls, and sliding glass doors onto primary bathroom lanais) sit in a specific footprint that matters when we open a wall. Identifying the right unit and compatible trim starts with the label, not with a measurement. Every ES Windows unit carries a permanent label on the frame or sash with the series number, a Florida product approval number, and the size code. Photograph that label before we arrive. The size code is the fastest way to confirm compatibility; measuring the rough opening alone gets you close, not exact, because ES Windows uses distinct sill and jamb dimensions across series.
The OEM-versus-aftermarket call is where we earn our keep. For structural frame and glazing components, an OEM-matched part is the right answer every time – aftermarket glass and frame extrusions that pass a visual check can fail the wind-load rating the original ES Windows unit was permitted under. For finishes, trim, and interior moisture barriers, a quality aftermarket equivalent is honest. We carry neither in stock; we source against the label and the permit number. Under Clause 1, the written price for sourcing the part arrives before anyone picks up a tool.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
- Soft or bubbling drywall beside the window. The seal between the ES Windows frame and the wet-wall substrate has opened, and moisture is wicking into the paper-faced drywall. Left alone, this reaches the framing within one rainy season in Homestead.
- Fogging between glass panes. The insulated glass unit’s perimeter seal has failed, letting humid air into the cavity. This is a glass replacement, not a frame replacement, and it affects the whole unit’s efficiency.
- Water pooling on the interior sill. The weep system at the base of the ES Windows frame is clogged or the sill is sloped the wrong way. This is often a small fix; treating it as a bathroom remodel is overkill.
- Peeling paint or cracking caulk on the interior trim within one season. The caulk joint is doing the waterproofing that the flashing should be doing. That tells us the exterior flashing is compromised.
- Musty smell that returns after every cleaning. Water is trapped behind the tile or inside the wall cavity around the ES Windows unit, and surface mold treatment will not solve it. A moisture meter reading usually confirms it in minutes.
Replacement Cost & What’s Included

Most Homestead ES Windows bathroom projects fall inside these written ranges. These are installed prices, parts and labor together, not add-ons.
| Scope | Installed price range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range upward: how much wet-wall framing has to be replaced, whether the ES Windows unit itself needs glazing or frame work, and whether the permit is a repair or a full remodel. Tile choice and fixture brand move the number too – we source ES Windows-compatible materials alongside KraftMaid, Cambria, and Silestone for the same project without stacking markups. The written warranty covers labor and installation, and the 365-Day Done Right Promise means if the work is not right, we make it right. The quoted price is flat; a change of scope needs a signed change order first.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Where this gets dangerous: anything involving the actual ES Windows frame, glazing, or the wall assembly around it. Opening a wet wall around a rated impact window in Homestead and replacing the unit yourself voids the Florida product approval for that opening – the permit was issued for the rated assembly, and a homeowner-installed replacement can leave the wall unprotected when the next storm comes through. There is also real risk to the waterproofing of the shower behind it. What you can safely check: the label on the frame, whether water pools on the sill, whether the caulk is cracking, and a visual inspection of the drywall for soft spots. Photograph each, and call (844) 834-4248 for a free estimate once you have the label in hand.
FAQs

Sealed insulated glass in an ES Windows unit typically holds for 15 to 20 years in this climate, but the perimeter seal against the wet wall is the one that fails first – we regularly see it open within 8 to 10 years in bathrooms exposed to afternoon sun on the east side of a Homestead home. Caulk joints need attention every 3 to 5 years regardless of the unit. Call (844) 834-4248 for an exact quote on replacement; estimates are free.
Often yes. A clogged weep at the sill, a failed caulk joint, or a single fogged pane can be repaired as a targeted fix without touching the rest of the bathroom. Frame damage, compromised flashing, or mold behind the tile usually means replacement of the affected assembly. We tell you which one you’re looking at in the written estimate, not after the crew shows up.
A single ES Windows component repair (glass, sill, flashing) is typically a one-day job. A full bathroom remodel runs 2 to 4 weeks depending on tile, fixture lead times, and how much framing inspection reveals. The written scope includes the schedule. Call us to get a date on the calendar.
We source against the permanent label on your ES Windows unit – series number, Florida product approval number, size code – through vetted supplier relationships. We do not claim to stock ES Windows parts or carry them on a truck. What we can show you is the spec sheet, the supplier confirmation, and the written price before we order. Call (844) 834-4248 with the label photographed and we’ll confirm availability and a written quote.
Get a Written Price on Your Homestead ES Windows Bathroom
Rowan Construction Group Homestead is an independent service provider, not affiliated with ES Windows, and we’ve built a record of 4,000-plus projects since 2007 – each one quoted with a flat written price before work started, with a documented photo record on every visit and no change without a signed change order. Bring a competitor’s written estimate and we’ll review it line by line at no charge under our Free Second Opinion offer. Call (844) 834-4248 to schedule your free estimate for your Homestead bathroom.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












