







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Homestead Owner’s Guide
We install and replace Mr-Glass windows and doors, or the failed components inside them, for Homestead homeowners. A typical replacement runs $4,500 – $15,000 for a standard window package and $8,000 – $25,000 for impact-rated units, which is the spec most of Homestead needs for wind-borne debris protection. We write the price down before anyone touches a frame.
Most owners don’t call us because a window looks broken. They call because a sash won’t latch in the summer heat, a multi-point door lock grinds halfway through the turn, or a sealed glass unit fogs between the panes after a rainy season. Those are part failures, not appearance problems, and they show up in Homestead’s humidity and salt air faster than in drier parts of Florida. We’re an independent service provider, not affiliated with Mr-Glass, so we match your existing hardware rather than push a specific brand line.
Which Mr-Glass Models This Applies To

Mr-Glass ships several window and door lines through Florida distribution, and the parts inside them are not interchangeable across series. Before we quote anything, we identify what you actually have. The manufacturer’s label is usually etched into the glass corner or stuck inside the head jamb or sash channel – it carries a series code, a glass build date, and often the impact rating. If the label is gone, we measure the visible glass, the frame depth, and the sash thickness, because a part that fits a 3/4-inch channel will not seat in a 1-inch one.
The OEM-versus-aftermarket decision matters most on hardware. Original Mr-Glass multi-point lock assemblies and tilt-latch mechanisms are the safest match for an exact series, especially on impact-rated doors where the lock contributes to the pressure rating. For weatherstripping, rollers, screen frames, and sash balances, a quality aftermarket equivalent performs the same and often costs less. We tell you which category your part falls into before you decide. We also service KraftMaid, Cambria, and Silestone products, though this page stays on windows and doors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
Homestead owners usually notice one of these five things first. Each points to a specific part, not a whole-unit failure.
- Fogging or condensation between the panes. The sealed glass unit’s spacer or desiccant seal has failed, letting moisture in. The glass itself is fine; the insulated unit needs replacing.
- A sash that won’t stay up or slams down. The balance (the spring or spiral mechanism that counterweights the sash) has lost tension or the cord has snapped. It’s a small part that makes the window feel broken.
- Difficulty latching a door or turning the handle all the way. The multi-point lock’s gear mechanism or the strike plates have drifted out of alignment, common after a slab settles in our soil.
- Drafts, water intrusion, or a whistling sound at the frame. Weatherstripping and seals have compressed or cracked under UV and heat. Florida sun ages rubber fast.
- Rough, grinding, or stuck operation of a sliding or tilt sash. Rollers, pivot shoes, or tilt latches have worn or corroded – salt air near the coast accelerates this.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for Homestead, written down so you can compare it to any other quote:
| Work | Installed Price Range |
|---|---|
| Standard window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single component (glass unit, lock, balance, seals) | Quoted per part after inspection |
The range depends on unit count, whether you go impact-rated, frame condition, and how much of the original trim can be reused. Every quote is a flat written price with a written scope and a written warranty before work starts – under Clause 1, the number is on paper before anyone picks up a tool. No work proceeds on a change until the change order is signed. The install work is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some checks are safe for an owner. You can confirm which series you have by finding the label, measure the glass and frame so you know what part you’re chasing, and test whether a sash problem is the balance or the latch by watching the mechanism as it moves. You can also clean and inspect weatherstripping yourself.
Where it goes wrong: sealed glass units and impact-rated door hardware are not homeowner swaps. Replacing an insulated glass unit means getting the glazing and setting blocks right, and a badly seated impact lock can compromise the door’s rating – a real safety concern in a wind zone. Springs and balances under tension can snap and cause injury, so we don’t recommend handling them. For anything beyond a visual check, call (844) 834-4248 and we’ll tell you honestly whether you need a part or a full unit.
FAQs

A well-built unit typically lasts 20 to 30 years, but individual parts fail sooner – weatherstripping and seals often give out in 5 to 10 years under Florida sun, and balances or rollers can wear in that window too. The glass and frame usually outlast the hardware.
Often, yes. A failed lock, balance, roller, or weather seal is usually a repair, and even a fogged glass unit can be re-glazed without replacing the frame. We inspect first and tell you which path costs less. Call (844) 834-4248 for a free estimate.
A single part – a lock, a balance, a glass unit – is usually a same-visit job once the correct part is matched to your series. A multi-window or door package takes longer and we schedule it in writing. We confirm timing before we start.
We identify your series from the label or by measurement, then match OEM hardware where the rating depends on it and a quality aftermarket equivalent where it doesn’t. We don’t claim to stock parts – we source the correct one for your unit. Every visit comes with a documented photo record of what we found and what we installed.
If you have a Mr-Glass window or door that isn’t working the way it should, call (844) 834-4248 for a free estimate. We’ll identify the part, write the price down, and tell you plainly whether it’s a repair or a replacement – and if you already have a written estimate from someone else, we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












