







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Homestead Owner’s Guide
Therma-Tru doesn’t manufacture roofing, and that’s the first thing to get straight before we go further. Therma-Tru makes fiberglass and steel entry doors, sidelites, and door systems – not shingles, underlayment, or flashing. So when a Homestead homeowner searches for “Therma-Tru roofing,” what they usually mean is one of two things: a roofer told them the door frame, threshold, or head flashing that ties a Therma-Tru unit into the roof or wall assembly has failed, or they need the roofing around a Therma-Tru door replaced so the door itself stops leaking. Roof repair in Homestead runs $400 to $1,800 depending on what’s involved; a full roof replacement is $8,000 to $20,000. Rowan Construction Group Homestead works on both sides of that line. We’re an independent contractor and not affiliated with Therma-Tru, but our technicians have up to 19 years of experience with fiberglass door systems and the roof-to-door interface where they sit.
Owners typically find this problem the same way: a brown water stain spreading on the ceiling tile just inside an entry door after a Homestead afternoon downpour, or a soft spot in the drywall beside the door jamb that wasn’t there before hurricane season. Sometimes the door itself sticks or won’t latch because the header above it has absorbed water. That’s the pattern to watch.
Key Takeaways
- Therma-Tru is a door brand, not a roofing brand – the failure is almost always in the flashing, frame seal, or adjacent roofing tied to a Therma-Tru door, not a “Therma-Tru roof.”
- Roof repair around a door in Homestead: $400 to $1,800. Full replacement if the decking is compromised: $8,000 to $20,000.
- Under Clause 1 of The Haven Standard, you get a flat written price before any work starts. No “call for a quote.”
- Every visit includes a documented photo record – you see what we found at the door frame and in the attic, in writing, before anyone touches a shingle.
Which Therma-Tru Models This Applies To

The failure points we see in Homestead are consistent across Therma-Tru’s door families. The Classic-Craft line (fiberglass, with the squared or arch-top profiles) and the Smooth-Star line (smoother fiberglass faces) both sit in the same kind of rough opening, and both rely on the same three things to stay dry: a properly lapped head flashing, a sealed threshold pan, and caulking at the brick mold where the door meets the exterior wall. The Fiber-Classic and Profiles lines are built the same way for our purposes. Model number matters less than which series the door belongs to and how it was originally installed.
To identify what you have, look for the label on the top edge of the door slab – Therma-Tru stamps it there – or the manufacturer sticker on the jamb. Measure the rough opening (width and height of the framed hole, not the door slab). A 36-by-80-inch door, the most common entry size, needs flashing that laps at least 2 inches past the frame on each side for a code-compliant install. Where OEM and aftermarket diverge: Therma-Tru’s own sill pans and head flashing kits are sized to their exact frame profiles, so a generic aftermarket pan often needs to be custom-bent to fit. We’ll tell you honestly when the OEM piece is the right call and when a fabricated metal pan does the job for less.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
Here’s what a real failure looks like, and what’s causing it underneath:
- Water stain on the interior wall or ceiling near the door. Usually the head flashing was installed behind the building paper instead of over it, so water wicks inward instead of shedding out. In Homestead’s wind-driven rain, that reversal shows up within one wet season.
- Door sticks, drags, or won’t latch in humid weather. The header above the door has absorbed moisture and swelled, throwing the frame out of square. This is a roofing-and-flashing problem masquerading as a door problem.
- Peeling paint or bubbling caulk at the brick mold and jamb. The seal between frame and wall has failed, letting water sit against the fiberglass. Left alone, it works into the sheathing behind.
- Soft or discolored drywall at the bottom corners inside the entry. Water is pooling at the threshold pan, which means the pan is cracked or was never sloped correctly. Homestead’s flat lots and standing water after storms make this worse than in hill-country markets.
- Visible gaps or lifted shingles where the roof meets the door’s wall section. The step flashing or counterflashing has pulled loose. On a low-slope porch roof, this is the most common leak path we find.
Replacement Cost & What’s Included

Roof repair around a Therma-Tru door in Homestead runs $400 to $1,800. That range covers flashing replacement, re-sealing, and localized shingle or underlayment repair. When the surrounding roof decking is rotted through, a full roof replacement is $8,000 to $20,000. Metal roof installation, if you’re upgrading, runs $15,000 to $40,000. Tile roof repair sits at $600 to $2,500 if you have a tile section over the entry.
What drives the range: how far the water traveled before you caught it, whether the decking needs replacement, the pitch of the roof over the door, and whether we’re matching existing shingle color and profile. The quote is line-itemed – flashing, underlayment, shingles, labor, disposal – so you see the parts and the labor separately. The price is flat and written before work begins. The work carries our 365-Day Done Right Promise, backed by The Haven Standard.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few things yourself. Look at the ceiling and wall near the door inside after a heavy rain and note where the stain is. Check the caulk line at the brick mold by pressing it – if it’s cracked or pulls away, that’s your first clue. From the ground, look at the roofline above the door for lifted or missing shingles. Write down what you find and photograph it.
Where DIY goes wrong: climbing onto a wet roof in Homestead to re-flash a door head is genuinely dangerous – a fall from eave height is the kind of injury that changes a household. And the fix that looks right (a bead of caulk over failed flashing) traps water instead of shedding it, so the leak reappears worse the next storm. Flashing has to lap in the right order, under the building paper, with the right metal. That’s a roofer’s call, not a weekend job. If your inspection turns up any of the signs above, call us at (844) 834-4248. We’ll come out, document what we find with photos, and hand you a written price before anything gets touched.
FAQs

Metal flashing itself can last 20 to 30 years, but in Homestead’s salt air and sun, the caulk and sealant at the frame typically fail every 4 to 7 years and need resealing before the metal is the problem. The flashing outlasts the seal around it – that seal is what usually gives out first. Call (844) 834-4248 for a free estimate if it’s been more than five years since the entry was sealed.
Yes, in most cases – if the decking and sheathing are sound, localized flashing repair at $400 to $1,800 is the right fix and a full replacement isn’t needed. We only recommend the larger job when the wood underneath has rotted, and we show you the photo evidence from inside the attic so you can decide with facts. Call (844) 834-4248 and we’ll take a look.
A flashing repair around a single entry door is usually a one- to two-day job once materials are on site, including the dry-in and seal. A full roof section replacement runs several days depending on size. We give you the written scope and timeline before we start, so you know what to expect. Call (844) 834-4248 to schedule your free estimate.
We source the right flashing and sill components by identifying your Therma-Tru series first – Classic-Craft, Smooth-Star, Fiber-Classic, or Profiles – then matching the flashing profile to that frame. Where Therma-Tru’s OEM sill pan or head flashing is the correct fit, we source it; where a fabricated metal pan performs the same for less, we tell you that too. Our supply relationships span GAF and Owens Corning roofing materials, and our quote reflects the actual part cost, not an inflated one. Call (844) 834-4248 for a free estimate. We also work with KraftMaid, Cambria, and Silestone on interior projects, but the exterior is where this call lives.
Get Your Written Price Before Anyone Picks Up a Tool
If you’ve got a stained ceiling, a sticking door, or a flashing gap above your Therma-Tru entry, the fix is worth doing right the first time. Rowan Construction Group Homestead brings the photo record, the flat written quote, and the line-item by line-item transparency – under Clause 1 of The Haven Standard, the number is on paper before work starts. Call (844) 834-4248 today for your free estimate. Live person answers 24/7, and every crew member is background-checked and verified before they arrive.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












