







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Kitchen Remodeling: The Homestead Owner’s Guide
We handle ViewLux-compatible kitchen remodeling in Homestead at an installed price of $14,000 – $45,000, with cabinet work, countertops, backsplashes and islands scoped in writing before anyone touches a drawer. Cabinets, hardware and surfaces are sourced and installed by crews working to ViewLux specs, with a flat written price and a written scope up front. Most Homestead owners find out something has gone wrong the same way: a soft-close drawer stops closing softly, a cabinet door sags at the hinge plate, or a seam on the countertop starts catching a fingernail before any stain shows. We’re Rowan Construction Group Homestead, an independent service provider and not affiliated with ViewLux. Our technicians have up to 19 years of experience, and every visit includes a documented photo record you keep.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That holds whether the job is a full Homestead kitchen remodel or a single cabinet run.
Which ViewLux Models This Applies To

ViewLux ships kitchen cabinetry and component lines across several series, and the parts aren’t interchangeable between them. Before we quote anything, we identify three things: the door profile, the box construction, and the hinge or slide mounting pattern. That’s what determines whether a replacement door or a full cabinet run will fit the opening you already have.
How to identify what’s in your home:
- Look inside the cabinet box, not the showroom door. Many ViewLux lines carry a label or ink stamp on the inside face of the cabinet side panel, usually near the back corner.
- Measure the door overlay. A full-overlay door covers nearly the whole face frame; a partial-overlay door leaves a visible strip. Measure the gap between adjacent doors when they’re closed.
- Check the hinge plate screw pattern. The distance between mounting screws and the cup bore diameter tell us which hinge family the cabinet belongs to.
- Measure the countertop overhang and seam placement. This matters for any ViewLux-compatible top, because the seam has to land where the cabinet run provides support underneath.
On OEM versus aftermarket: for a small repair, a quality aftermarket hinge or slide that matches the mounting pattern is often the honest choice, and we’ll say so. For anything visible, a door, a panel, a drawer face, the OEM part is the one that matches the finish and profile, and on a discontinued ViewLux line that can mean a longer lead time. We’ll tell you which path fits before you commit.
We also work with KraftMaid, Cambria and Silestone where a mixed kitchen calls for it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Kitchen Remodeling Is Failing
Symptoms in a ViewLux kitchen usually trace back to one of five causes. Here’s how each shows up in a Homestead home:
- Doors that won’t stay closed or swing open on their own. The hinge has lost tension or the mounting plate has pulled slightly from the cabinet face. In humidity, the plate screws loosen more than most owners expect.
- Soft-close drawers that slam. The slide’s damper has failed, not the whole slide. A damper replacement is a fraction of the cost of a full drawer slide swap.
- Sagging shelves or a bowed cabinet floor. The shelf pin or the box panel has given under a heavy load. It usually points to a thin box panel or a missing center support, both fixable.
- Seams lifting on the countertop or backsplash. The adhesive or grout has failed, often because moisture got behind the joint. This is common in Florida kitchens where the AC cycles hard and the joint moves.
- Recurring moisture at the toe kick or under the sink. A slow leak or condensation has reached the cabinet bottom. Left too long, the substrate swells and the fix jumps from a caulk line to a full cabinet bottom replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Homestead, the numbers we actually quote:
| Work | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number up or down: cabinet box construction and door material, the countertop surface (a quartz or stone top sits at the top of its range), how much demolition and disposal is involved, and whether plumbing or electrical has to move. We quote parts and labor separately on the written estimate so you can see where the money goes. Every quote is a flat price with a written scope and written warranty, and no change proceeds until you sign a change order. The work is covered by our 365-Day Done Right Promise, backed by The Haven Standard.
DIY or Call Us?
Here’s what an owner can safely handle: tightening a loose hinge plate screw, checking for moisture under the sink, replacing a soft-close damper on a ViewLux slide if you have the model number and the right part, and re-caulking a backsplash joint. Those are low-risk and reversible.
Where DIY goes wrong: chasing a sagging cabinet by re-drilling shelf pin holes, which cracks the box panel; trying to re-glue a swollen cabinet bottom without fixing the leak that caused it; and removing a stone countertop or a cabinet run to get at a leak. Stone is heavy, breakable, and unforgiving of a wrong lift. If the job involves shutting off water, cutting into a wall, or moving a countertop, call us. A plumber or an experienced installer should be the one doing it. Call (844) 834-4248 to schedule a free estimate.
FAQs

Expect hinges, slides and adhesives to be the first components to need attention. In Homestead’s humidity, soft-close dampers and hinge plates tend to be the first to go, often well before the cabinet boxes or countertop show real wear. Hardware is the inexpensive part of a kitchen; replacement of those small components usually extends the life of the cabinets substantially. Call (844) 834-4248 for an exact quote, estimates are free.
Sometimes, yes. A failed damper, a hinge, or a loose shelf support can often be repaired rather than replaced. A cracked cabinet box, a warped door, or a delaminated countertop edge generally needs a replacement. We’ll tell you which one you’re looking at after we see the part. Call (844) 834-4248 to schedule a free assessment.
A single hinge or damper swap takes well under an hour. A countertop or a cabinet run is a different job and runs a day or more, depending on the scope and material lead time. We confirm timing in the written quote so you know what to plan around. Call (844) 834-4248 for your free estimate.
We match the part to your ViewLux model using the series and mounting details, then source through suppliers we’ve vetted. On a discontinued line, we’ll quote the aftermarket equivalent and label it clearly on the estimate. We don’t stock parts on a truck; every part is ordered to your job. Call (844) 834-4248 with your model details and we’ll confirm availability.
Every Homestead project is quoted with a flat written price and a written scope before work begins, and you get a documented photo record when the crew leaves. If you have a competitor’s quote, bring it in for a free line-by-line second opinion. Call (844) 834-4248 to schedule your free estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












