







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Homestead Owner’s Guide
We install and replace Barrette kitchen components across Homestead, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, with cabinet-specific swaps landing in the $4,000 – $13,000 range. Most Homestead owners don’t discover a failed Barrette part until a door stops latching or a drawer begins to sag under daily humidity. The trigger is usually a soft-close hinge that no longer closes quietly, a worn drawer glide, or a cabinet door that has swollen and now rubs the face frame. We match the exact series so the new part fits the box you already own.
Key Takeaways
- Barrette-compatible kitchen work in Homestead: $14,000 – $45,000 for a full remodel, $800 – $2,500 for a backsplash refresh, and $2,000 – $6,500 for countertops.
- We’re an independent service provider, not affiliated with Barrette. We match OEM or premium aftermarket parts to your exact model.
- A live person answers (844) 834-4248, and every visit includes a documented photo record as standard.
Which Barrette Models This Applies To

Barrette cabinetry sold into the South Florida market shows up in several series, and the part you need depends on which one you have. Cabinet doors, drawer boxes, and glides are not universal – a soft-close hinge from one series will not fit the face-frame cutout of another. To identify yours, check inside the cabinet door or the back of the drawer box for the manufacturer’s label, usually a small sticker with a series code and a date. Barrette labels the hinge plate and glide on many recent production runs; if yours is missing or illegible, measure the door overlay (how far the door extends past the face frame) and the drawer glide length in millimeters – those two numbers narrow the part to a handful of candidates.
On the OEM-versus-aftermarket question, Barrette has strong aftermarket support, so you’ll often find a quality equivalent glide or hinge that fits the mounting pattern exactly and costs less than a dealer-ordered OEM piece. We weigh it case by case: for a visible hinge or a soft-close mechanism under heavy daily use, an OEM-grade part reduces the chance of a mismatch; for a hidden drawer glide, a premium aftermarket match is usually the smarter buy. Our technicians have up to 19 years of experience matching these components, so we can tell you which route fits your box before you spend the money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Doors that drift or no longer self-close. The soft-close dampener inside the hinge has lost tension from repeated cycling in Homestead’s humid air. Once it stops cushioning, the door slams and stresses the hinge plate.
- Drawers that sag or catch on the frame. A worn or cracked drawer glide, or a box that has absorbed moisture and warped. The box loses square, so the rollers ride off track and the glide fails faster.
- Swollen or rubbing doors. Composite and painted doors take on moisture in Florida’s summer humidity and expand at the edges. A door that closes clean in winter and rubs in July is telling you the material is saturated.
- Loose hinges that won’t stay tight. Screw holes in the particleboard or plywood face frame strip out over time from door weight and slam-loading. Re-tightening buys weeks, not years.
- Visible water staining or swelling near the sink and dishwasher. Barrette boxes are not waterproof. A slow leak or a failed dishwasher gasket swells the base and can sink a whole run of cabinets if it’s not caught.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Homestead, cabinet installation and replacement runs $4,000 – $13,000 depending on box count and door style. Countertop installation is $2,000 – $6,500, a backsplash is $800 – $2,500, and a kitchen island adds $3,000 – $10,000. Full kitchen remodels land at $14,000 – $45,000. What drives the range: number of boxes, whether we’re swapping a single failed door or a full run, and the finish level you choose. We quote a flat written price with a written scope before work starts – the part, labor, and cleanup are itemized so you can see exactly what a single part swap costs versus a whole section. No work proceeds on a change until the change order is signed. The work carries our 365-Day Done Right Promise.
DIY or Call Us?
You can safely do the checking yourself: open the doors, look for the label, measure the overlay and glide, and photograph the failure. What goes wrong is the swap – a hinge or glide that looks like it fits but doesn’t, a stripped screw hole that needs a filler and redrill, or a warped box that should be replaced rather than patched. Patching a swollen cabinet box hides a moisture problem that returns. If the failure involves water staining, a soft or spongy base, or a full run of doors that won’t align, stop and let us look. Call (844) 834-4248 and we’ll schedule a free written estimate – bring a competitor’s quote and we’ll review it line by line at no charge.
FAQs

How long do Barrette kitchen cabinet parts last in Homestead? Soft-close hinges and drawer glides typically last 8 to 12 years in a Homestead kitchen, shorter in homes with heavy daily use and long stretches of air conditioning running against Florida humidity. The cabinet box itself lasts decades; it’s the moving hardware that fails first, and that’s the part worth replacing.
Can a failed Barette part be repaired instead of replaced? In some cases, yes – a stripped hinge screw hole can be filled and redrilled, and a loose glide clip can be reset. But a dead soft-close dampener or a warped drawer box can’t be repaired reliably, only replaced. We’ll tell you which one you’re facing before you commit. Call (844) 834-4248 for an exact quote – estimates are free.
How long does a part swap take? A single hinge or glide replacement is a short visit, often under an hour. A run of doors or a full drawer bank takes longer because alignment and leveling happen after the hardware is in. We confirm the timeline in writing with your scope.
How do you source the right Barrette part? We use the series code or measurements you provide, then match OEM or a quality aftermarket equivalent to your exact box. You get the part number and price in writing before we order. We also service KraftMaid, Cambria, and Silestone kitchens if your build mixes brands.
Ready to get the number in writing? Call (844) 834-4248 for a free estimate on your Barrette kitchen in Homestead. Every quote is a flat written price with a written scope, backed by the 365-Day Done Right Promise – and a live person answers 24/7.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












