A Rowan company - serving Homestead, FL
A backyard with a new horizontal privacy fence
Barrette · Homestead

Barrette Home Additions & ADU in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A new stained cedar privacy fence
A new front yard fence with a matching gate
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Home Additions & ADU: The Homestead Owner’s Guide

We install and repair Barrette-branded home additions and ADU systems for Homestead homeowners, with typical installed pricing running from $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a full ADU. Barrette’s outdoor living lines are original equipment on thousands of South Florida additions, and when a component like a screen enclosure track, framing channel, or roof panel connector starts to move, the fix is usually specific to the Barrette profile. A Barrette-manufactured addition that’s cracking at the post base or letting water past the roof panel seam is the most common call we get in Homestead, and behind it is almost always a failed connector or a fastener that lost its grip after one too many hurricane-season flexes.

Call (844) 834-4248

Key Takeaways

  • Installed Barrette-compatible addition work in Homestead: $45,000 to $130,000 depending on span and structure.
  • ADU construction: $90,000 to $220,000, driven mostly by foundation scope and electrical service.
  • The Barrette profile matters – a generic replacement connector won’t match the original extrusion.
  • We source the correct part and quote the flat installed price in writing before any work starts.
  • Homestead wind code adds cost to every addition; we pull the permits and pass the inspections.

Which Barrette Models This Applies To

A new wood side gate with black hardware

Barrette’s structural aluminum and screen-enclosure framing shows up across its outdoor living catalog, and the profile geometry has changed several times over the years. The same nominal post size can carry a different wall thickness and a different channel dimension depending on when the section was extruded. That means if you’re ordering a replacement framing member or connector, a part that fits the outside dimensions can still be wrong on the inside.

The way to get it right is to find the stamped or adhesive ID label inside the addition: it will name the series and, if you can read it, the extruded profile run. If the label is gone, we take two measurements that matter more than the nominal size – the channel opening and the web thickness – and cross-reference them before ordering. On Barrette specifically, the OEM-versus-aftermarket decision usually favors OEM for structural connectors and the profile-specific pieces, because the extrusion shape is the whole match. For non-structural items like snap covers and vinyl trim, a quality equivalent is fine and often faster to source. We’re an independent service provider and not affiliated with Barrette; what we bring is the measurement and the record that the correct part left and the right part went on.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Home Additions & ADU Is Failing

  • Water staining on the roof panels. When a panel seam lets go, the first sign is a dull brown streak on the panel underside. That’s usually a failed seam cap or a fastener that backed out of the purlin, not a roof that’s worn out.
  • Creaking or flex in the framing. A post or beam that moves underfoot means a connector has lost tension. In Homestead, the daily thermal swing plus the wet season is enough to loosen a set screw that was never torque-checked.
  • Cracks radiating from a post base. Corner and post footings are where the load concentrates. A hairline crack is often the concrete footing and the connector interface separating, and the fix is a footing review, not just a new connector.
  • Door and window tracks that bind. If a screen door drags on its track, the frame may have racked. That’s a structural symptom in a Barrette screen or enclosure, and it gets worse in wind.
  • Discolored or brittle plastic connectors and seals. UV in South Florida eats polymer parts faster than most of the country. Two to four years is a realistic service life for sun-exposed connectors, so a part that’s graying and hard is a part that’s close to failing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Homestead, a Barrette addition repair typically runs $45,000 to $130,000 installed when the scope is a home addition, and $90,000 to $220,000 for a full ADU, though a targeted repair to a component – reseating framing, replacing connectors, re-capping roof panels – is a fraction of that and often starts near $1,500 to $9,000. The range is driven mostly by the span of the addition, the footing scope, and whether the work touches the electrical service. Every quote is a flat written price with a written scope, so the number you sign is the number you pay; no change proceeds until the change order is signed. The work carries the 365-Day Done Right Promise, and every visit includes a documented photo record. Call (844) 834-4248 for an exact quote.

DIY or Call Us?

You can safely identify and check the part yourself. Take photos of the ID label, measure the channel opening and web thickness, and note where water is staining or a connection has moved. Where DIY goes wrong on a Barrette addition is at the connection points – a framing member that’s cut to fit and bolted back wrong can crack the footing, and a screen panel that’s re-fastened without the right tension will fail in the first strong wind of hurricane season. We recommend a trained professional for anything that carries structural load or touches the roof panels. What you can do first is call (844) 834-4248 for a free estimate. We’ll review the photos and the measurements and give you a written flat price, no change orders without your signature, and a technician who’s been background-checked before they arrive.

FAQs

New architectural shingles with a clean valley

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new multi-panel patio door opening a kitchen to the patioA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA standing-seam metal roof over a covered porchA new bay window with a cushioned seat

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch