







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The Homestead Owner’s Guide
Jerith aluminum ornamental fence installation in Homestead typically runs $3,500 – $9,000 installed, depending on linear footage, gate count, and whether existing posts and footings can be reused. That price is a flat written number with a written scope before we touch a tool – no estimates that drift once the crew is on site. Most Homestead owners start pricing after a single symptom: a gate that drops and drags on the latch, a post that rocks in saturated ground after a summer storm, or a powder-coat that has begun to chalk and peel along the pickets and rails.
Once one section shows that wear, the rest of the run is usually on the same clock. The aluminum underneath may still be sound, but the coating, footings, and hardware have taken everything South Florida weather can give them. We measure what’s left and quote the fix in writing.
Key Takeaways
- Jerith aluminum fence installation in Homestead: $3,500 – $9,000 installed.
- Powder-coat failure and footing movement are the two most common replacement triggers we see in Homestead.
- Written flat price and written scope before work begins, with the 365-Day Done Right Promise on the installation.
- We’re an independent contractor. We are not affiliated with Jerith.
Which Jerith Models This Applies To

Jerith made ornamental aluminum fence across several product lines over the years, and the line directly determines whether a section can be patched or has to be replaced as a run. The two families you’re most likely to have are the traditional 3-rail and 4-rail picket styles (often called out by height, typically 48″, 54″, or 60″) and the taller estate-style units. The critical gotcha: rail spacing and picket spacing changed between production eras, and the picket-to-rail bracket style is not universal. A 54″ panel from one production run will not always accept the picket from another without a different bracket. If you have a mismatched panel, the fix isn’t the picket – it’s the bracket.
To identify your model correctly, find a stamped or printed label on the post collar or on the inside face of a rail. Look for the model name and height designation. If there is no label, measure two things precisely: the outside-to-outside post spacing (centerline-to-centerline is more accurate) and the picket spacing from inside edge to inside edge. Bring those two numbers to the quote. For Jerith specifically, OEM replacement panels are the right answer when you’re spot-repairing a run. When the whole section is being replaced, an aftermarket aluminum ornamental panel of matching height, rail count, and finish color is a legitimate choice – you just need to match the height and rail count so the line doesn’t look stitched. We source both OEM-equivalent and aftermarket panels; the written quote will name which one we’re specifying and the price for each option.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Fence Installation Is Failing
Aluminum doesn’t fail the way wood does. The metal holds. What fails in Homestead is the coating, the footings, and the gate hardware. Here’s how to read it.
- Powder-coat chalking, hazing, or peeling along the top rail and pickets. UV exposure and salt-laden air break down the finish over the life of the coating. Once it peels to bare aluminum, oxidization starts, and paint touch-up never quite holds on a peeling substrate.
- A gate that drops and drags on the latch. The hinge pins and gate post footing have taken on the load the original installation assumed would not move. In Homestead’s rainy season, a footing that wasn’t dug deep enough shows its failure as a gate that used to swing free and doesn’t anymore.
- Post movement or visible rocking. A post that moves when you lean on it has either lost its concrete setting or was never set deep enough. Footing depth matters more in Homestead than in coastal Georgia or inland Carolina because the water table and storm cycle push and pull soil differently. Settled posts put the whole fence run out of plumb.
- Loose or spinning pickets. When the bracket or rivet has fatigued, a picket spins or slides in the rail. That’s hardware, not the picket itself, and the fix depends on matching the bracket to the production era.
- Crooked or pulled fence line after a storm. Wind load on a long, unbroken run can rack the fence. A bent rail or a run that’s no longer straight but hasn’t broken is telling you the original spacing and footing depth didn’t account for a storm of that size. The fix is re-set or re-pour, not more tension.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Jerith aluminum fence installation in Homestead runs $3,500 – $9,000 for a typical residential lot. The written quote spells out what drives the range:
- Linear footage and height – taller runs and longer runs cost more, and a 60″ estate-style fence will sit at the top of the range.
- Gate count and size – a walk gate and a drive gate each carry hardware, hinge, and post cost that a straight run doesn’t.
- Removal of existing fence – hauling off the old run and disposing of concrete footings adds line-item cost.
- Footing conditions – reuse of existing footings is cheaper; new concrete footings dug to depth in Homestead soil are not.
- Finish color and panel style – a factory powder-coat finish in a specialty color adds cost, and an OEM panel costs more than an aftermarket match.
The written price covers panels, posts, hardware, concrete, labor, and cleanup. Under the 365-Day Done Right Promise, if the installation isn’t right, we make it right. You also get the documented photo record – the footing excavation, the depth, the finished run – so you have evidence of what was built.
DIY or Call Us?
There are things you can check yourself safely: walk the run and look for chalking or peeling on the powder coat; push on the posts to test for movement; open and close every gate to feel the hinge and latch; measure the picket and post spacing to confirm what you have. That’s information, not labor, and it will make the quote faster and more accurate.
What we would not recommend doing yourself: pulling a footing out of the ground without knowing what’s holding the adjacent run in place, resetting a gate post without a concrete mix and depth that will last the rainy season, or trying to free a picket that is seized or spinning in its bracket for the same reason. When a fence is only months from full replacement, the worst outcome is spending a weekend to make it worse before the estimator arrives. Call (844) 834-4248 for a free written estimate. If a gate is dragging, the estimate tells you what the fix actually costs before you decide.
FAQs

How long does a Jerith aluminum fence last in Homestead? A properly installed Jerith aluminum fence should hold up for 20 years or more in this climate. The aluminum itself is the durable part. The factory powder coat is the first to fail, especially on south- and west-facing top rails where UV and salt air get the most hours. Inland, the finish may last longer than a coastal run; here, plan for finish touch-up or re-coat somewhere in that window, not full replacement.
Can the fence be repaired instead of fully replaced? Often, yes. A single dropped gate or a loose picket is typically a hardware or footing repair, not a full replacement. What decides it is whether the run is straight and level along the top rail and whether the posts are still set solid. If both are true, patch repair is legitimate. If the line is racked or several posts are moving, the cost of the patch is money spent on a fence that is headed for replacement anyway. Call (844) 834-4248 for an exact quote – estimates are free.
How long does the swap take? A straight run of 150 – 200 feet typically installs in one to two days, weather permitting. Removal of the old fence and haul-off add a day. Gate installation and footing cure are the two things that set the timeline, not the panel count. A written schedule comes with the written price.
How do you source the Jerith part? We source from manufacturers and vetted suppliers who carry Jerith-compatible aluminum fence components, and we’ll name in writing whether we’re specifying OEM or an aftermarket equivalent, at what price. You review that before we order. We don’t claim to carry parts on a truck; the panel and hardware are ordered to your model, height, and finish. Call (844) 834-4248 for a free estimate and a written scope.
We also work with KraftMaid, Cambria, and Silestone on other parts of the home.
Rowan Construction Group Homestead installs aluminum ornamental fencing and gate hardware for yards across the area, with a flat written price before any work begins and the 365-Day Done Right Promise behind the installation. We’re an independent contractor, not affiliated with Jerith. Call (844) 834-4248 for a free written estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












