







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Home Additions & ADU: The Homestead Owner’s Guide
We build and finish ActiveYards-compatible additions and ADUs in Homestead, and the installed price for the structural and exterior envelope runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, including the written scope and warranty. Most Homestead owners don’t call because something “broke” – they call because a screened enclosure or patio cover that came with an ActiveYards package is sagging, a post base has rusted through, or the connection between the new roofline and the main house is letting water in during a summer storm. That’s the moment a parts-and-labor conversation starts.
Which ActiveYards Models This Applies To

ActiveYards sells through a network of dealers, and the parts that matter for an addition or ADU fall into a few families: post bases and anchors, roof-to-wall flashing kits, screen and panel extrusions, and the fasteners and brackets that tie a shade structure or enclosure to the existing structure. The tag on the original install packet – usually stapled inside a post or on the header – gives you the series and finish, and that’s what we need to match hardware correctly. A galvanized bracket and a powder-coated aluminum bracket can look identical on a shelf and fail differently in Homestead’s salt air, so finish matters as much as dimension.
On the OEM-vs-aftermarket question: for visible extrusions and trim, the OEM piece is usually worth the wait because the profile has to match. For hidden anchors, plates, and standard fasteners, a quality aftermarket equivalent that meets the same load rating is often the honest choice and prices lower. We’re an independent contractor and not affiliated with ActiveYards – we tell you which parts need the factory profile and which don’t. If you want to check the same sourcing discipline on the interiors, we also work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Home Additions & ADU Is Failing
- Sagging along the header or beam. Usually a post base that’s lost its anchor into the slab or footing, or a beam that was under-sized for the span. In Homestead’s heat, a slow deflection shows first at the middle of a run.
- Rust blooming at the brackets and post feet. Salt air off the coast and the summer humidity eat a cheap finish fast. Surface rust on a structural anchor means the load path is compromised, not just cosmetically ugly.
- Water stains where the addition meets the house. That’s a failed flashing detail at the roofline – the most common leak we find on Homestead additions after the first storm season.
- Loose or cracked screen panels and popping fasteners. Wind load works fasteners loose; a panel that’s rattling in a breeze needs re-securing before it becomes a projectile.
- Doors and windows that no longer square up. When a frame racks out of plumb, the part that failed is usually structural – the anchor or footing, not the door.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Repairing or re-securing structural connections on an ActiveYards addition in Homestead typically lands in the $2,500 – $12,000 range depending on how much of the load path needs rebuild, flashing rework, and finish re-coating. A full addition envelope runs $45,000 – $130,000; an ADU $90,000 – $220,000; a garage conversion to living space $30,000 – $80,000. What drives the range: footing condition, span length, whether the flashing detail has to be rebuilt from the sheathing out, and finish selection.
Every quote is a flat written price with a written scope and a written warranty before any work starts. Parts and labor are listed line by line. No work proceeds on a change until the change order is signed – that’s the Haven Standard, Clause 1. The 365-Day Done Right Promise covers the work for a full year, and every visit includes a documented photo record of what we found and what we did. Bring a competitor’s estimate and we’ll review it line by line at no charge.
Safety note: if the failure is in the structural frame – a sagging beam, a footing, a connection holding a roof – do not climb up to “test” it. A loaded beam can shift suddenly. That work is for a trained crew, full stop.
DIY or Call Us?
You can safely tighten a loose screen panel fastener, wipe and inspect post bases for rust, and photograph any water staining so you can show us where it starts. What you shouldn’t do yourself is re-anchor a structural post, rebuild a roof-to-wall flashing detail, or cut into a footing – those jobs fail in ways that aren’t visible until the next storm, and Homestead’s wind-driven rain finds every shortcut. If a bracket is loose at the base or a beam is deflecting, stop and let a crew with the right anchors and load ratings handle it. Call (844) 834-4248 to schedule your free estimate, and we’ll put the number in writing before anyone picks up a tool. Our technicians have up to 19 years of experience, and they’re background-checked and uniformed.
FAQs

How long should an ActiveYards addition part last in Homestead? A galvanized or properly powder-coated anchor in this climate typically lasts 15 – 20 years; an untreated or thin-finish fastener can rust through in 5 – 8. Salt air near the coast shortens that further.
Can the part be repaired instead of replaced? Often yes – a loose anchor can be re-set with the correct epoxy and a new plate, and flashing can sometimes be rebuilt without tearing out the whole assembly. We inspect and tell you which path holds. Call (844) 834-4248 for a free quote.
How long does the swap take? A bracket or anchor replacement is usually a one-day job; a flashing rebuild or structural re-secure runs 2 – 5 days depending on access and finish. We give you the timeline in writing.
How do you source the ActiveYards part? We identify the series from the tag or by measuring the profile, then source the OEM extrusion or a rated aftermarket equivalent – whichever matches the load path. We’re independent and not affiliated with ActiveYards, and we tell you honestly which part you actually need.
Call (844) 834-4248 for a free estimate on your ActiveYards addition or ADU work in Homestead. We’ll inspect it, photograph it, and hand you a flat written price with the scope and the warranty before any tool comes out of the truck – that’s the Rowan Construction Group way, and it’s backed by the 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












