







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Homestead Owner’s Guide
We install Belgard pavers and paver driveways in Homestead, and a full Belgard driveway typically runs $7,000 – $18,000 installed, while a Belgard paver patio lands between $3,500 – $11,000. Repair work on a settled or broken paver section is quoted as a flat written price before anyone starts. We’re an independent contractor and not affiliated with Belgard; we source their products through vetted distributors.
Owners usually spot the problem the same way: a low spot in the driveway that holds water after a Homestead thunderstorm, a paver that rocks when you step on it, or a joint where the polymeric sand has washed out for the third time. Here in South Florida’s limestone-and-sand substrate, that pattern almost always points to the base layer, not the pavers themselves. The pavers are the last thing to fail. The base is the first.
Which Belgard Models This Applies To

Belgard makes a wide range of paver lines, and matching the right product matters more than most homeowners expect. The main families you’ll see on Homestead driveways are the Mega Bergerac and Bergerac (large-format, tumbled face), Urbana and Catalina (cleaner, tighter-jointed modern profiles), Bristol Bay and Cambridge (classic cobble looks), and Holland and Aqua-Roc for walkway and patio applications. The 60mm thickness is standard for driveways; 80mm is the heavier-duty option where vehicle loads are constant.
To identify what you have, pull one loose paver and measure it face-to-face and in thickness. Match that measurement against the current Belgard spec sheet for the line, not against a photo. Colors and face textures shift by production run, so a 2016 Catalina in “Beechwood” won’t perfectly match a 2025 batch from the same line – this is the most common compatibility gotcha on older Homestead installs. If exact color match is critical (a visible repair in a high-traffic area), we recommend replacing a larger field section rather than chasing a single-paver match. OEM Belgard is worth the premium where a specific profile or color must be preserved. Quality aftermarket equivalents are fine for base material, edge restraints, and joint sand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Driveway & Pavers Is Failing
- Ponding water after rain. A dip that holds water for more than a few hours signals settlement in the base layer or a lost slope to the street drain. Repointing the joints won’t fix it because the paver is only following the base underneath.
- Rocking or loose pavers. A single paver that tips when stepped on means the bedding sand has migrated or the base is compromised at that point. Ignored, the movement spreads to the neighboring field within a season or two.
- Polymeric sand washing out repeatedly. In Homestead’s heavy summer rain, joint sand loss on a properly installed driveway should be minimal. Chronic loss means the joint gaps are too wide or the base is shifting and opening them.
- Visible cracks or chipped edges. A cracked paver can mean impact damage from a vehicle, or it can mean the base is failing and the paver is flexing. The cause determines whether a single-paver swap holds or fails again.
- Weeds sprouting through joints. Small weeds are normal. Persistent weeds along a single line usually mean the edge restraint is separating from the field, letting sand escape and organic material enter.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed price ranges for Homestead, calibrated to the local market:
| Work | Installed price range |
|---|---|
| Paver driveway installation (Belgard) | $7,000 – $18,000 |
| Paver patio installation (Belgard) | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, whether the existing base can be reused or must be excavated and regraded, access for equipment, and the Belgard line you choose. Every Rowan Construction Group quote is a flat written price with a written scope and a written warranty before work starts. Materials, base prep, edge restraint, and joint sand are itemized. Under Clause 1 of the Haven Standard, no change proceeds without a signed change order.
DIY or Call Us?
You can safely check a few things yourself: pull one loose paver to identify the model and thickness, watch where water pools after a storm, and note which pavers rock when you walk across them. That’s useful information to have on hand.
Where DIY goes wrong: laying pavers over an unaddressed base failure. It looks right for one rainy season and then the same dip returns. Proper installation means a compacted aggregate base of six to eight inches for driveways, a bedding sand layer, edge restraint set into concrete, and joint sand applied and compacted correctly. Miss any of those steps and the paver fails again. We don’t ship step-by-step guidance for that reason; the work requires compaction equipment and the right grade. Call (844) 834-4248 for a free estimate – we’ll look at the base before we quote.
FAQs

How long do Belgard pavers last in Homestead’s climate? Belgard pavers themselves are built to hold up for 25 – 50 years under normal residential load, but the installation underneath determines real-world lifespan in South Florida. A properly installed paver driveway here should give 20 – 30 years of service before the base needs attention. The pavers outlast the base almost every time.
Can a failing Belgard driveway be repaired instead of replaced? Yes, when the failure is localized – a single settling section, an undermined edge, or washed-out joints can often be pulled, rebased, and reset. Full replacement makes sense when settlement is widespread or the base was never built to standard. We’ll tell you which one you have in writing, not as an upsell. Call (844) 834-4248 for a second opinion on any quote.
How long does the paver work take? A driveway section repair is typically one to two days. A full driveway installation runs three to five days depending on square footage and base conditions. You’ll get a written schedule with the quote.
How do we source the Belgard product? We order through Belgard distributors, matching your existing line and profile where possible. For older installs where the original color run is discontinued, we’ll show you the closest available options and recommend the field-section replacement approach so the repair blends properly.
We also work with KraftMaid, Cambria, and Silestone on interior projects, so if the driveway work is part of a larger home improvement push, one contractor relationship covers more of it.
Call (844) 834-4248 to schedule your free estimate. Written price, written scope, written warranty – before any work starts, on every trade from Driveway and Pavers through Home Additions and ADUs.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












