







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The Homestead Owner’s Guide
Fence installation with Ameristar steel systems in Homestead typically runs $3,500 – $9,000 installed, depending on linear footage, gate count and how much old fence and concrete footing has to come out first. Ameristar is a welded-steel and ornamental line, so most owners land on this page when a section has started to lean, a weld has let go, or the factory powder coat has chipped and rust is bleeding through after a few hurricane seasons. We’re an independent contractor and not affiliated with Ameristar. We install and repair Ameristar-compatible fencing across Homestead, and every job is quoted with a flat written price before anyone starts.
Key takeaways
- Installed Ameristar-compatible fence in Homestead: $3,500 – $9,000.
- Most price movement comes from footage, gate count, and footing replacement.
- We quote a flat written price and a written scope up front. No change proceeds without a signed change order.
- Background-checked, uniformed technicians; calls answered by a live person 24/7; a documented photo record on every visit.
Which Ameristar Models This Applies To

Ameristar builds several residential lines – ornamental steel, welded utility panels, and aluminum picket systems – and the mounting hardware is not interchangeable between them. Post brackets for a welded steel panel don’t fit an aluminum picket line, and gate hinge styles differ by series. That mismatch is the single most common compatibility gotcha we see in Homestead.
To identify what you have, check three things before ordering anything. First, the post: measure wall thickness and outside diameter – ornamental steel and aluminum run different wall gauges. Second, the panel: count pickets and measure the gap between them, because that spacing defines the series. Third, any label or stamped mark on the post cap or panel end. If you can’t find a label, a photo of the post-to-panel connection plus a tape measure against the picket gap usually gets us there.
On the OEM-versus-aftermarket decision: Ameristar factory parts guarantee a color and gauge match to what’s already standing. Quality aftermarket brackets and hinges can save money on a small repair, but confirm the gauge and coating match first. A lighter-gauge bracket that looks identical on the shelf will flex and fail within a season here. We’ll tell you plainly which route makes sense for your fence.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
Steel and aluminum fences don’t rot, so failures show up differently than a wood fence would. These are the symptoms we find most often in Homestead:
- Leaning posts, especially at corners and gates. Usually a footing that wasn’t set deep enough or concrete that cracked – our sandy soil and heavy summer rain test footings hard.
- Rust bleeding from welds or scratch points. The powder coat gets chipped by string trimmers or debris, moisture gets under the coating, and rust starts at the thinnest point.
- A gate that drags or won’t latch. Often a hinge worn past tolerance or a post that’s shifted a fraction of an inch – enough to throw the gate out of square.
- Loose or missing panel brackets. Vibration and wind load work fasteners loose over time; a missing bracket lets the panel rattle and stress the next one.
- Chalky, faded finish. South Florida sun degrades powder coat over the years; faded sections signal the coating is thinning and rust risk is rising.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Most Ameristar-compatible fence work in Homestead falls between $3,500 and $9,000 installed. A few things move the number:
- Linear footage and height: more panels and taller posts mean more material and more footing.
- Gate count and style: a walk gate is cheaper than a double drive gate with heavy hinges.
- Old fence and footing removal: demo and haul-away add labor, and the more footing to break out, the higher the line item.
What’s included: parts, labor, footing work where needed, and cleanup. You get a flat written price and written scope before work begins – no “call for a quote,” no surprise line items. Under our 365-Day Done Right Promise, if it isn’t done right we make it right. Ask about a written warranty on the installation. We’ll also review any competitor’s written estimate line by line at no charge.
DIY or Call Us?
Some things you can safely check yourself: walk the line, look for leaning posts, test the gate, and photograph any rust or loose brackets. That helps us quote accurately.
Where DIY goes wrong: footing work. Setting a post in our sandy Homestead soil and getting it plumb and deep enough to hold through a storm is not a weekend job with a bag of quick-set – a shallow footing is exactly why so many fences lean after a couple of years. Replacing a whole panel or hanging a heavy drive gate is also more than most homeowners want to take on, and a bad hang puts load where the hardware isn’t built to carry it. For a repair beyond a loose bracket, have a trained crew handle it. Call (844) 834-4248 and we’ll tell you what we’d do.
FAQs

A properly installed Ameristar steel or aluminum fence can hold up for two to three decades or more, but the Florida sun and salt-heavy air shorten the finish’s life well before the steel’s. Plan on touch-up and hardware replacement within the first several years, and watch for rust at scratch points.
Often yes. A single leaning post, a worn hinge, or a rusted bracket can usually be repaired rather than replaced. If multiple footings have failed or the coating is widespread, replacement costs less over time. Call (844) 834-4248 and we’ll assess it.
A typical residential run takes one to three days, depending on footage, gate count, and how much old footing has to come out. We’ll give you a realistic timeline in the written scope before we start.
We source through vetted suppliers and confirm gauge and coating match to your existing fence before ordering. That’s how we avoid the aftermarket mismatch that causes premature failures in Homestead. We don’t stock parts here – we match and install them.
We also work with KraftMaid, Cambria, and Silestone on other trades, and each one gets the same written price and documented record. Call (844) 834-4248 for a free estimate on your Ameristar-compatible fence installation in Homestead.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












