







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Homestead Owner’s Guide
We handle Ameristar kitchen remodeling in Homestead, with cabinet, countertop, and finish work typically landing between $14,000 and $45,000 installed, depending on layout, materials, and whether the room gets gutted or only refaced. Most Homestead owners find us at the point where doors no longer sit flush, a hinge pulls out of the frame, or a countertop seam has started shadowing. That is usually a parts-and-fit problem, not a taste problem.
Ameristar is one of the cabinet and component lines we source, install, and replace. We are an independent contractor and are not affiliated with Ameristar. Our technicians have up to 19 years of experience, and every job gets a written price before anyone picks up a tool.
Which Ameristar Models This Applies To

Ameristar builds cabinet boxes, doors, drawer boxes, hinges, and slides, and the parts are not universal across the line. A door from one series will not hang on a frame built for another; the bore spacing and overlay can differ by fractions of an inch, and those fractions decide whether the door closes clean and quiet or rubs the stile every time you shut it. That is the compatibility gotcha most Homestead homeowners run into when they order a replacement part off a photo and a guess.
Find the model before you order. Open a base cabinet or pull a drawer and look for the interior label: a series name, a model stamp, and often a finish code. If the label is gone, we measure instead: cabinet box depth, door overlay, and hinge cup bore. From those three numbers we can match the correct Ameristar part or a quality aftermarket equivalent that lines up exactly.
On the OEM-versus-aftermarket decision, Ameristar OEM gives you a guaranteed match to your series. A good aftermarket hinge or slide often holds up as well or better for a fraction of the cost, and we will say so honestly when that is the case. What we will never do is swap in a part that almost fits and hope it holds. If you are weighing a full remodel rather than a single part, we source KraftMaid, Cambria, and Silestone alongside Ameristar, so the written quote reflects real material options.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors that no longer sit flush. Hinges wear and the plate loosens in the frame, so the door drops and catches. In Homestead’s humidity, the box itself can swell just enough to shift the alignment further.
- A hinge that pulls out of the frame screws. Repeated opening and a soft or swollen particleboard frame strip let the screws wallow out. That is a structural fix, not a tighten-and-go.
- Drawers that grind or stick. The slide’s bearing race or rollers are failing. Sticking is the early signal; grinding and a drawer that will not stay shut is the late one.
- A countertop seam that shadows or lifts. Seams collect moisture and the adhesive lets go, so the two pieces no longer sit level. This one is worth a second look before you entertain replacing the whole top.
- Swelling or softness at the sink base or under a window. Water and Homestead’s humid air get behind the cabinet box, and the frame softens. By the time you see staining, the substrate is often already compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Homestead, here is what the numbers look like for the parts-and-labor work we do most. These are installed ranges with the part and the labor bundled, so you are not left guessing at a second invoice.
- Cabinet installation: $4,000-$13,000
- Countertop installation: $2,000-$6,500
- Backsplash installation: $800-$2,500
- Kitchen island installation: $3,000-$10,000
- Small kitchen remodel: $9,000-$20,000
- Full kitchen remodel: $14,000-$45,000
The range is driven by door style and finish, the number of boxes you are replacing, whether the substrate is sound or needs repair, and the countertop material. The written price names the part, the labor, and the warranty on the work before anything starts. No work proceeds on a change until the change order is signed, and a 365-Day Done Right Promise stands behind the finished job.
DIY or Call Us?
Some of this is a sound homeowner check. You can tighten a hinge that has simply worked loose, wipe the seam, and inspect for swelling, moisture, and stripped screws. A hinge that will not re-grip, a drawer slide that grinds, or a countertop seam that has lifted is past checking.
A kitchen remodel part swap looks simple until the frame is swollen and the new hinge will not seat, or the overlay measurement is off and the door rubs. The safety flag here is different from a garage door spring, but the risk is real: a heavy countertop or island piece that is not bracketed and shimmed correctly can shift or fail, and improperly hung wall cabinets are a genuine hazard over a head-height space. We would rather you check than chance it. Call (844) 834-4248 for a written price before any work starts.
FAQs

Quality hinges and slides typically run 10 to 15 years, and cabinet boxes can last well beyond that with care, but Homestead’s humidity is hard on the accelerators: moisture swelling shortens hinge and frame life if water reaches the box. So keep the sink base and window cabinets dry. Call (844) 834-4248 for a parts-and-fit inspection if you are unsure of the age or condition.
Often yes. A loose hinge, a stripped screw with solid wood behind it, or a slide that only needs a clean and re-align can be repaired rather than replaced. A swollen frame, a cracked door, or a failed bearing race means replacement. We tell you which in the written estimate before any work starts.
A single hinge or drawer slide swap is usually under an hour; a full set of doors or a bank of drawers runs a half day to a day, and a cabinet or countertop replacement longer, depending on scope. You get the timeline in writing with the price. Call (844) 834-4248 and we will schedule a free estimate.
By model number first, and by measurement when the label is gone. We source across a broad range of vetted brands, including Ameristar, KraftMaid, Cambria, and Silestone, so we match the exact part your series needs rather than a near fit. Every visit includes a documented photo record of what we found and what we replaced.
Call (844) 834-4248 for a free estimate. We put the number in writing before any work starts, and our crews are background-checked and uniformed, with a live person answering the line around the clock.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












