







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Homestead Owner’s Guide
If you already own Belgard hardscape material or want your addition and ADU exterior to read as one continuous surface, we install Belgard-compatible home additions and ADU envelopes in Homestead. Expect to pay between $45,000 and $130,000 for a home addition and $90,000 to $220,000 for a standalone ADU, with the Belgard masonry and paver work folded into the written scope. Same-day turnaround isn’t realistic on any addition, and we won’t pretend otherwise.
Owners usually discover a failing part one of two ways: an outdoor kitchen or patio that has heaved its footing and is now pulling away from the ADU wall, or a set of pavers that has started rocking underfoot after a wet season. Belgard doesn’t fail as a brand. Backed materials under an addition get asked to carry loads they weren’t specified for, or the slab and base rock beneath them weren’t prepped for Homestead’s water table.
Which Belgard Models This Applies To

Belgard’s lines split into two families that matter here: the paver series (Urbana, Catalina, Lafitt, and others) and the wall-and-slab systems used for outdoor kitchens and feature walls. Each series has its own nominal thickness, its own modular repeat, and its own recommended base depth. A 60mm paver and an 80mm paver are not interchangeable under a slab that carries a wall, and swapping one for the other changes the grade line where your addition meets the main house.
Before you order anything, measure three things: the actual (not nominal) thickness at the edge of the field, the width of the paver in the field, and the height of any retaining or seat-wall course that flags off. Then match those numbers against the product page for your series. Do not trust the look of the pattern alone; Belgard runs autumnal and grey blends across several series that look identical in a photo.
OEM Belgard stock is the safe match if you’re tying into an existing field and want the color and machine face to line up. Aftermarket pavers can hit the same dimensions at a lower unit cost, but the mold face and edge chamfer read differently under a Florida afternoon sun, and the mix strength varies by supplier. We’ll price both and note where the aftermarket paver lands in the comparison. Rowan Construction Group Homestead is an independent contractor, not affiliated with Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
What you’ll actually see in Homestead is water movement first and structural symptoms second. Only at that stage do most owners realize the problem is the base, not the paver.
- Pavers rocking underfoot. The base course beneath the Belgard field has lost compaction or been undermined by water. Once the paver moves, the sand joint opens, the next storm fills it, and the cycle repeats.
- Sand washing out of the joints. Joint sand disappearing after a hard rain means the water has nowhere to go. That usually points to slope, drainage, or a missing edge restraint rather than the Belgard paver itself.
- Efflorescence that won’t clear. A white haze on the paver face that returns after cleaning is moisture moving through the unit, not surface dirt. It’s how a Belgard field tells you the base is staying wet.
- Heaving or a lip at the ADU wall. If the paver line meets the slab of an addition and one side has lifted, the footing or the slab edge is doing something it shouldn’t. This one is worth a look before the season turns.
- Cracked pavers clustered in one area. Isolated cracks in a Belgard field are usually a point load – a grill, a planter, a step – landing on pavers that weren’t specified for it. Scattered cracking across a whole field points to the sub-base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a home addition in Homestead, most Belgard-inclusive scopes land between $45,000 and $130,000. The Belgard portion – paver fields, seat walls, an outdoor kitchen surround, a step or landing at the ADU entry – typically sits in the low five figures inside that number. A standalone ADU runs $90,000 to $220,000, and a garage conversion runs $30,000 to $80,000. What pushes the top of any of those ranges is base prep, drainage correction, and utility work, not the paver itself.
Pricing here is parts-plus-labor, and we show it as two lines in the written quote so you can see what the Belgard material costs against what the crew and equipment cost. What drives the range on a Belgard scope is depth of base required, edge restraint, drain placement, and whether the existing field can be matched or has to be lifted and relaid.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. No change proceeds without a signed change order, so the number on the page and the number on the invoice are the same number. The 365-Day Done Right Promise covers the work: if it isn’t done right in the first year, we come back and make it right.
DIY or Call Us?
Safe to check yourself: measure the paver thickness at the edge of the field, photograph where the joint sand has washed out after rain, and confirm the model name if you can read it on an edge unit or on the original project paperwork. That’s information, not work. None of it involves a tool that can hurt you.
Where DIY goes wrong is at the base. Lifting a Belgard paver to “just reset it” without addressing the base course means the same paver moves again after the next wet season, and now you’ve got a joint that will never sit flush. Under an addition or ADU wall, the paver is doing load-bearing work. A paver field under a seat wall or an outdoor kitchen is carrying real weight, and getting that base wrong isn’t a cosmetic problem.
Call (844) 834-4248 and we’ll look at it. Free second opinion on any written estimate if you’ve already got one from another contractor – we’ll walk through it line by line.
FAQs

A properly installed Belgard paver with a correct base and edge restraint lasts 25 to 30 years in South Florida. The paver itself usually outlasts the base; what shortens that lifespan is standing water and missing edge restraint, not the product. Call (844) 834-4248 for a look at your field.
Often yes. A localized paver failure – a few units, a single wet spot – can be lifted, base corrected, and the same paver relaid if the blend is still available. Field-wide heaving or a slab settlement at the addition wall usually means rebuild, not repair. We’ll tell you which one it is after looking.
A localized repair is typically one to two days once material is on site. A full field under an addition or ADU envelope depends on the scope and whether drainage is being corrected. Belgard material lead time varies by series, so the written quote includes that line. Call (844) 834-4248 for an exact schedule on your scope.
We match the series, nominal thickness, and blend against your existing field, then quote OEM Belgard and a quality aftermarket equivalent side by side. We don’t carry stock; every part is ordered to the measured spec for your project rather than assumed. If your Belgard blend has been discontinued, we’ll show you the closest live match and say so in the written scope.
If you’re planning an addition or ADU in Homestead and the Belgard exterior is part of the decision, call (844) 834-4248 for a free estimate. We’ll bring a written price, a written scope, and a written warranty to the first visit. We also work alongside KraftMaid, Cambria, and Silestone if the inside of the addition needs to come together at the same time.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












