







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Homestead, FL: paver driveways, patios, retaining walls, and repairs on existing installations, quoted at a flat written price before any work starts. What makes our Belgard work different is local calibration. We install MegaArbel, Catalina granite, Weston Wall, and Dublin Cobble against Homestead’s actual conditions – sandy base soil, intense UV, salt air off Biscayne Bay, and a June through November storm season – rather than a generic national spec. We’re not affiliated with, authorized by, or endorsed by Belgard; we’re an independent contractor that knows the product line. Call (844) 834-4248 for a free estimate.
Why Trust Rowan Construction Group Homestead for Your Belgard Construction?

Our crews have installed Belgard hardscape across South Florida for years, and our technicians bring up to 19 years of experience to the work. That matters with Belgard specifically because the brand’s failure modes are installation failures, not product failures. A MegaArbel driveway that heaves after two wet seasons usually has a base problem underneath it. A Weston Wall that leans usually has a backfill or drainage problem behind it.
We use Belgard OEM components – proprietary joint sand, wall connectors, cap units – where a repair calls for them, and we source aftermarket base material and polymeric sand that meets or exceeds manufacturer spec where the OEM part adds cost without adding performance. Every scope we write is a written scope. No work proceeds on a change until a change order is signed, which is the discipline that has kept our projects within a few percent of the agreed price across 4,000-plus jobs. The 365-Day Done Right Promise backs the installation, and a documented photo record of every visit – base depth, compaction, drainage, joint sand – comes with the job as a standard deliverable, not an upgrade.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Homestead
These are the five calls we get most often on Belgard hardscape in Homestead, and what’s actually causing each one.
- Efflorescence on MegaArbel pavers. That white chalky haze isn’t mold and it isn’t a defect – it’s mineral salts migrating to the surface as moisture moves through the paver, and Miami-Dade’s humidity plus near-daily summer rain drives it hard. Proper drainage detailing and a breathable sealer reduce recurrence; scrubbing alone treats the symptom.
- Color fading on Catalina granite pavers. Catalina’s pigment sits in the surface layer, and in full Homestead sun – a yard with no tree canopy gets brutal UV – the color can dull over years while the structural paver stays sound. We check whether it’s surface fade or actual spalling before recommending anything, because sealing a faded paver doesn’t restore color.
- Settlement and shifting in sandy soil. Homestead sits on sandy, fast-draining ground, and pavers laid over a base that wasn’t compacted in lifts will rut and rock within a couple of seasons. This is the single most common installation defect we correct, and it’s underneath the pavers, not in them.
- Weed growth and joint sand erosion in Dublin Cobble. Dublin Cobble’s joint pattern collects runoff if the polymeric sand wasn’t installed correctly or has washed out. Once joints open, weeds establish and the interlock that holds the field together starts to fail. Re-sanding with a properly installed polymeric sand usually stops it.
- Wall movement on Weston Wall retaining blocks. A leaning wall is a drainage story – hydrostatic pressure behind the wall, missing or clogged weep points, or backfill that wasn’t compacted. Repairs that only reset the face block fail again; the fix has to address what’s behind it.
Belgard Parts & Our Repair-vs-Replace Approach

We’re honest about parts. For Belgard repairs we use OEM components – the brand’s proprietary joint sand and its wall connector system – when they’re available and when they perform better. For base aggregate and polymeric sand we often source aftermarket products that meet or exceed the manufacturer’s spec, because the performance difference on a Homestead driveway is negligible and the cost difference isn’t. We don’t keep Belgard stock on hand; parts are sourced per job against the written scope, so lead times are part of your quote.
Repair versus replace comes down to the base and the field. If the pavers are structurally sound and the problem is joint sand, settlement in one area, or drainage, a targeted repair – lift, re-compact, re-level, re-sand – costs a fraction of replacement and usually lasts. If the base is failing across the whole field or the pavers are spalling, we’ll tell you so plainly rather than sell you a patch that comes back next season. Call (844) 834-4248 for an exact quote – estimates are free.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We inspect the base condition, joint sand, drainage slope, and wall backfill where relevant, and document what we find in photos – not an opinion, a record.
- 2
Written scope and price. You get a flat written price with the material spec, coverage area, and warranty language before anyone lifts a paver. Under Clause 1 of the Haven Standard, the price is written first.
- 3
Repair or install. Excavation and compaction in lifts for new work; for repairs, affected units are lifted, the base corrected, and pavers reinstalled with fresh polymeric sand. Any scope change stops until a change order is signed.
- 4
Verification. We check slope and drainage with water, confirm joint sand is locked, and photograph the finished field.
- 5
Warranty handover. You leave with the written warranty and the full photo record, backed by the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Homestead
We work across the Belgard residential line, including MegaArbel pavers for driveways and heavy-traffic areas, Catalina granite pavers where a textured granite look suits the house, Dublin Cobble pavers for patios and walkways, and Weston Wall retaining wall systems for grade changes and planter walls. That covers paver driveway installation, paver patio installation, driveway replacement, and retaining wall repair and rebuild. We also handle joint sand replacement, settlement correction, and drainage retrofits on existing Belgard installations. Parts are sourced per job; we don’t claim local stock.
We Also Service These Brands
Belgard is one hardscape brand among fifty-plus we work with, which means the quote you get reflects an honest comparison rather than a single-brand bias. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, and source GAF and Owens Corning roofing. If your project spans trades, one written price covers the scope.
FAQs – Belgard Construction Service in Homestead

Is Rowan Construction Group Homestead authorized by Belgard? No. We’re an independent contractor, not authorized, endorsed, or affiliated with Belgard. We install and service Belgard products using our own crews and our own written process. Call (844) 834-4248 with questions.
Do you use genuine Belgard/OEM parts? For repairs we use OEM Belgard components – proprietary joint sand and wall connectors – when they’re available and perform better. We also source aftermarket base and polymeric sand that meets or exceeds manufacturer spec, and the written scope tells you which.
How long does Belgard service take? A repair like re-sanding or settlement correction is typically a one-day job. A full paver driveway installation in Homestead usually runs several days to a week or more depending on square footage, base conditions, and material lead times, and your written scope states the timeline.
What Belgard models/series do you cover? MegaArbel, Catalina granite, Dublin Cobble, and the Weston Wall retaining system, plus general joint sand, base, and drainage work on existing installations.
Will service void my Belgard warranty? Belgard’s product warranty covers the paver itself, not the installation, and installation is the contractor’s responsibility. A warranty-safe repair addresses the base and joint system without cutting or altering pavers beyond the manufacturer’s guidance. Call (844) 834-4248 and we’ll review your situation.
How much does Belgard construction cost in Homestead? Paver driveway installation runs $7,000 – $18,000, paver patio installation $3,500 – $11,000, and driveway sealing $250 – $700. Call (844) 834-4248 for an exact quote – estimates are free.
Book Your Belgard Service in Homestead, FL
Book your Belgard service in Homestead, FL by calling (844) 834-4248. We’ll inspect the installation, document what we find, and hand you a flat written price before any work starts. Free estimate, and a free second opinion on any written estimate you already have.
Written by the team at Rowan Construction Group.












