







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Homestead Owner’s Guide
Blanco-compatible kitchen remodeling in Homestead runs $14,000 – $45,000 installed, depending on whether you’re keeping the cabinet boxes or going full replacement with new doors, countertops and sink. If you’re here because one Blanco component failed – a cracked sink, a dead faucet valve, a delaminating edge – a single-part swap usually lands far below that range, and we’ll tell you plainly whether the repair or the remodel is the honest answer. Every quote is a flat written price with a written scope before work starts, backed by our 365-Day Done Right Promise. Call (844) 834-4248 for a free estimate.
Most Homestead homeowners find us the same way: they bought a house with a Blanco Silgranit sink or a Blanco pull-down faucet already installed, and now a seam has cracked, the sprayer head drips, or the edge has begun to chip away from the composite. You bring the symptom and the model, we bring the price and the plan.
Key Takeaways
- Full Blanco-compatible kitchen remodels in Homestead: $14,000 – $45,000.
- Isolated part swaps (sink, faucet, drain assembly) cost a fraction of a full remodel.
- Blanco’s Silgranit composites and faucet cartridges have series-specific specs – matching the right part matters more than the brand badge.
- We’re an independent provider, not affiliated with Blanco, and we’ll say so on the invoice.
Which Blanco Models This Applies To

Blanco builds two very different things that both end up in Homestead kitchens: composite sinks (Silgranit and the older granite-based lines) and faucets (the pull-down, pull-out and filter-tap series). They fail for different reasons and swap with different parts, so the first step is identifying which you have. On a sink, the model name and finish are stamped on a small label on the underside of the basin rim; model numbers vary in bowl depth, bowl count and drain orientation, and a drop-in sink that fits a 33-inch cabinet cutout will not fit a 30-inch one regardless of brand. On a faucet, the cartridge inside is series-specific, and the trim color (Café Brown, Truffle, Metallic Gray) matters for replacement part matching.
When it comes to OEM versus aftermarket, our view for Blanco specifically: use OEM for faucet cartridges and any part that carries the water seal, because the tolerances and finishes are exact, and use a quality aftermarket equivalent for simple hardware like a basket strainer or an aerator when OEM lead time is long. We don’t claim to stock Blanco parts and we don’t carry them on a truck – we source the correct part to your model number. Our technicians have up to 19 years of experience matching composite sinks and faucet internals to the right spec. We also work with KraftMaid, Cambria and Silestone if your project grows into a broader remodel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Kitchen Remodeling Is Failing
- A hairline crack in the Silgranit basin or along the drain ring. Usually thermal shock from hot pans or a heavy impact on an unsupported edge – the crack starts small and spreads toward the drain.
- Chipping or delamination at the rim. The composite edge has failed; it’s common when a drop-in sink was set with fasteners overtightened against a thin laminate counter.
- A faucet that drips at the spout when the handle is off. The cartridge seal has worn – replace the cartridge, not the whole faucet, if the body and finish are sound.
- Water bleeding under the sink or a spongy countertop edge. The drain assembly or putty seal has failed and moisture is reaching the cabinet substrate; this is the one that turns a small part into a bigger repair if you wait.
- A sprayer head that won’t stay extended or sputters. The spring or diverter inside the pull-down head is worn, and the head assembly is a direct part swap on most current series.
South Florida’s humidity and salt-laden coastal air are hard on metal finishes and seals. In Homestead, we regularly see faucet cartridges and sink drain seals fail earlier than the manufacturer’s dry-climate lifespan suggests, because the constant moisture cycling around a sink base cabinet accelerates wear. If your sink is under 10 years old and the finish is still good, the part is usually worth replacing rather than the whole unit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest math. A single Blanco-compatible sink or faucet swap usually sits in the lower portion of these ranges, while a full kitchen remodel climbs to the top end:
| Project (Homestead) | Installed Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: sink cutout and support modifications when a composite sink swaps into a counter, cartridge or full-faucet replacement, drain and p-trap work, and whether the counter has to be re-cut around a different basin. Every quote is a flat written price with a written scope and a written warranty, so the number you agree to is the number you see on the invoice. If a swap reveals a hidden problem (a soft counter substrate, a corroded supply line), no work proceeds on the change until you sign a change order. That discipline is why our projects finish within a few percent of the agreed cost. Call (844) 834-4248 for a free estimate.
DIY or Call Us?
You can safely check quite a bit yourself: read the model label under the sink rim, look for the crack or delamination, confirm whether the drip comes from the spout or the handle base, and note the finish color. But shallow-bowl composite sink swaps are not a beginner job. The heavy composite basin is awkward to lift and seat, and if it isn’t properly supported under a laminate or stone counter, a small crack becomes a cracked counter. Faucet cartridge swaps look simple and turn hard fast – seized retainers and cross-threaded seat mounts are the two failures we fix most often after a homeowner starts one. Plumbing and heavy counter work carry real risk of water damage to the cabinet substrate, so for anything beyond a visual check and a removable aerator, call a trained professional. We’ll give you a flat written price first. Call (844) 834-4248 and we’ll pick up – a live person answers 24/7.
FAQs

How long does a Blanco sink or faucet last in Homestead? A well-cared-for Silgranit sink usually lasts 15 – 20 years, and a faucet cartridge 5 – 8 years, though Homestead’s humidity and coastal salt air can shorten metal and seal life. If yours is older than that or leaking at the seal, it’s a candidate for replacement. Call (844) 834-4248 for a free estimate.
Can this be repaired instead of replaced? Often yes. A dripping faucet is usually a cartridge swap, not a new faucet, and a chipped composite edge can sometimes be refinished if the damage is cosmetic and the basin is otherwise sound. A crack that reaches the drain or the mounting hole means replacement. Call (844) 834-4248 and we’ll tell you which one you have before any work starts.
How long does the swap take? A faucet cartridge or sprayer-head swap is often a single visit. A sink replacement is typically a longer day of work because of cutout fitting, under-counter support and drain re-seal, and if the counter needs re-cutting it can run into a second visit. You’ll get the time in writing with your scope. Call (844) 834-4248.
How do you source the Blanco part? We match the part to your model number and finish, source it, and show you the documentation when we arrive – no guessing at a lookalike cartridge. We’re an independent provider, not affiliated with Blanco, and we say so on the invoice. Every visit includes a documented photo record of what we found and what we did. Call (844) 834-4248 for a free estimate.
Ready to stop guessing whether it’s a part or a remodel? Call Rowan Construction Group Homestead at (844) 834-4248 to schedule your free estimate – we’ll give you a flat written price, a written scope, and a written warranty before anyone picks up a tool. Bring a competitor’s quote and we’ll review it line by line at no charge with our Free Second Opinion.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












