







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Homestead Owner’s Guide
We install, repair, and replace Boral driveway and paver systems across Homestead, with a typical paver driveway installation running $7,000 – $18,000 and paver patio work at $3,500 – $11,000. Exact timing depends on material lead time and the size of the pour or lay, so we schedule a free site visit rather than quote a number over the phone. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Boral.
Owners usually find the problem slowly. A Boral paver starts rocking underfoot after a heavy rain. A joint opens a quarter-inch wider than the rest of the grid. Efflorescence appears white and chalky on a run of pavers that used to match, and washing it doesn’t stop it from coming back. Or a driveway edge that was tight in 2019 now shows a widening gap against the expansion joint, and the first tire track makes it worse. Those are the four most common 911 calls on a Boral system in South Florida, and each points to a different fix.
Key Takeaways
- Boral paver driveways run $7,000 – $18,000 installed in Homestead; patios run $3,500 – $11,000.
- Most failures we see are substrate or joint-sand issues, not the paver itself.
- Boral’s Florida-compliant pavers are typically specified at 8,000+ psi compressive strength, which is why the units rarely crack – the base gives first.
- We quote a flat written price with a written scope before any work starts.
- Free second opinion on any written estimate you already have.
Which Boral Models This Applies To

Boral’s paver line has run under several families over the years: Brookstone, Bristol, Georgetown, Symmetry, and the Village Square series. If you’re replacing a single unit, the model name is usually stamped into the surface or printed on a band around the pallet, and the paver itself measures 3 ⅛ inches or 2 ⅜ inches thick depending on series. Thickness matters more than color when matching: a Georgetown paver set at 2 ⅜ inches won’t sit flush against a starter course laid at 3 ⅛, and that half-inch difference will show as a lip you’ll trip on for years. Measure a sample before you order anything.
The OEM-versus-aftermarket decision here is different from what it is with, say, a window sash. Boral no longer stocks every discontinued color in every series, and when a match can’t be sourced, an aftermarket paver that meets or exceeds Boral’s specification is a legitimate answer – provided the compressive strength, thickness, and freeze-thaw rating (which matters less in Homestead than in Georgia, but is still printed on the spec sheet) line up. We’ll walk you through both paths: exact Boral replacement when the color exists, and a matched aftermarket unit when it doesn’t. We also service KraftMaid, Cambria, and Silestone for the interior side of the same home, in case your project is larger than the driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Rocking or loose pavers underfoot. This almost always means the bedding sand has washed out or the base wasn’t compacted to depth. In Homestead, where we get heavy summer rain on flat lots, a shallow base fails fast.
- Widening joints between pavers. Joint sand is what locks the system together. When it erodes, water gets under the units and the whole field starts to shift. The gap is the symptom; the missing sand is the cause.
- Efflorescence that returns after cleaning. White mineral bloom on the paver surface is water moving through the unit and pulling salts out. If it keeps coming back, moisture is getting in from below, not from above.
- Uneven surface or ponding after rain. Paving needs a slope of roughly 1 to 2 percent away from the house. When that slope flattens, water pools in the low spot, the base saturates, and the pavers begin to settle.
- Cracked or chipped paver edges. Boral’s Florida-facing pavers are specified at high compressive strength, so edge failure is usually a base issue or impact from a vehicle rather than a defective unit. It’s worth checking whether the base is the real culprit before you buy replacement pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Homestead, all-in, with base prep, sand, and cleanup:
- Paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Driveway replacement (existing pavers removed and relaid): $5,000 – $14,000
- Driveway sealing: $250 – $700
What drives the range: square footage, base depth required after we probe your soil, how much existing material has to be broken out, and whether we’re matching a discontinued Boral series. Every quote we write is a flat price with a written scope and a written warranty. If we find a soft base under a section you didn’t mention, that becomes a change order you sign before any work moves forward – Clause 1 of the Haven Standard, and the reason our projects finish within a few percent of the agreed number. Labor, material, and disposal are shown separately so you can compare our line items against any other estimate.
DIY or Call Us?
What you can safely check yourself: measure a single paver’s thickness and length, photograph the pallet band or stamp for the model name, note where water ponds after a rain, and count the loose units. That’s information worth having before you call anyone.
Where DIY goes wrong: replacing one rocking paver without compacting and re-sanding the base underneath leaves the same failure waiting to happen. Re-sanding joints without cleaning them out first traps dirt and stops the sand from locking. And relaying a driveway without getting the slope right is the single largest source of ponding complaints we get called out to fix. There’s also a weight problem: a loaded pallet of 3 ⅛-inch pavers is not a one-person job, and we’ve seen more than one sprained back from a homeowner trying it. If the failure is structural, call (844) 834-4248. We’ll give you a free estimate and, if you already have a quote in hand, a free second opinion line by line.
FAQs

How long do Boral pavers last in Homestead?
Boral’s high-strength pavers routinely hold up 25 to 30 years or more in South Florida’s heat and rain, and often longer when the base is built right. The pavers themselves outlive the sand and the base underneath them, which is why the failure we see most is settling rather than cracked units.
Can my Boral paver be repaired instead of replaced?
Usually yes. A rocking paver, an eroded joint, and a section of washed-out sand can all be repaired locally without tearing out the whole field. We check the base under the affected area first, because if the base is soft, a spot repair won’t hold. Ask us for a repair quote before you assume replacement.
How long does a paver replacement take?
A spot repair is typically done in a single day. A full driveway replacement runs three to five days depending on square footage and cure time for the base material. We give you the schedule in writing with the estimate, not after the crew arrives.
How do you source a Boral paver when the color is discontinued?
We check Boral’s current inventory through our supplier network first. When a discontinued series isn’t available, we spec an aftermarket paver that matches the compressive strength, thickness, and color as closely as the market allows, and we show you the spec sheet before you commit. Call (844) 834-4248 for a free estimate. We’ll have the number in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












