







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Home Additions & ADU: The Homestead Owner’s Guide
We build and finish Boxabl-compatible home additions and ADUs in Homestead, and the installed numbers here run from $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a full ADU, depending on the footprint, the foundation, and how much site work the lot demands. This is planned construction, not a same-day swap, so the honest first step is a written scope and a written price before anyone lifts a tool. Owners usually come to this page after the plan they drew on a napkin collides with Homestead-Dade County zoning, or after a Boxabl panel or unit interface starts showing what the weather does to it.
Rowan Construction Group Homestead is an independent service provider and is not affiliated with Boxabl. We work with the installed product, the site, and the documents that let a permit reviewer say yes.
Key Takeaways
- Home addition pricing here: $45,000 – $130,000. Full ADU: $90,000 – $220,000. Garage conversion into a living unit: $30,000 – $80,000.
- Every Rowan project gets a flat written price and written scope before work starts. No change proceeds without a signed change order.
- Homestead’s wind-borne debris region and flood zones change foundation, anchoring, and glazing specs. That’s where the real cost lives.
- Our technicians have up to 19 years of experience, are background-checked and uniformed, and every visit includes a documented photo record.
Which Boxabl Models This Applies To

Boxabl builds its units on the Casita platform, and the model that shows up on a Homestead lot is most often a Casita folded out to roughly 361 square feet with a full bath and kitchenette. When an owner adds to a unit, or joins a second unit to the first, the work is not a new build in the usual sense. It’s an interface. You’re mating a factory panelized box to a site-built foundation, tying in utilities, and blending two structural systems that were never designed as one.
Identifying the right components means reading the labels inside the unit’s utility chase and the panel identification marks on the exterior skin. Boxabl’s panel system has changed over production runs, and the exterior finish details, fastener patterns, and utility stub locations can differ between an earlier unit and a later one. Measure twice before ordering anything. A panel ordered against the wrong run is a return, not a repair.
The OEM-versus-aftermarket decision is real here. For structural connectors, anchoring hardware, and anything a wind-load calculation touches, we use the OEM-spec component or an engineered equivalent with published load ratings. For finish items – skirting, trim, door hardware, interior casework – the quality aftermarket options are often better and cheaper than the factory part. We don’t carry stock and we don’t keep parts on a truck, but we source against the spec sheet you hand us or the one we read off your unit. Rowan also finishes bathrooms and kitchens in these units with the same materials we’d use in a site-built home: KraftMaid or Wellborn cabinetry, Cambria, Caesarstone, or Silestone counters, Kohler or Toto fixtures. That’s one line among many we’d quote – not the whole job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Home Additions & ADU Is Failing
- Water staining along the panel seams after a summer storm. The gaskets and sealant at the panel joints take the weather. When they age out, the seam wicks. That’s a sealing and gasket problem, not a structural one, and it’s fixable before it reaches the interior finish.
- Skirting and underside rust or rot. Homestead’s humidity is relentless. Steel skirting and exposed fasteners at grade show rust within a couple of seasons. That’s a maintenance item, and it’s cheaper to catch early than to replace later.
- Doors and windows that stick in the wet season. This is usually the interface between a factory panel and a site-built opening settling at different rates. Sometimes it’s a hinge; sometimes it’s an anchor. Worth knowing which.
- Utility stubs that show corrosion or weeping. The connection points where the unit meets the site supply are where most failures start. Galvanic corrosion on mixed-metal fittings is common in this climate.
- Floor pitch or a soft spot near the entry. Often the subfloor junction where the unit meets its foundation. Left alone, it spreads into the finish floor.
One honest note on safety: any work that touches the anchoring, the structural connections, or the electrical service of a Boxabl unit should be handled by a trained professional. These connections carry the wind load of the whole unit and they’re rated for a specific design pressure. A homeowner tightening a bolt that wasn’t specified for the job can compromise it. We flag that plainly, not to sell you anything, but because in a hurricane zone it matters.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the number on the page, in dollars, so you can screenshot it and compare. These are installed ranges for Homestead, not parts-only prices.
| Scope | Installed Range (Homestead) |
|---|---|
| Home addition (Boxabl-compatible) | $45,000 – $130,000 |
| ADU construction (full unit + foundation + utilities) | $90,000 – $220,000 |
| Garage conversion to living unit | $30,000 – $80,000 |
What moves the range: the foundation and anchoring design (Homestead’s wind zone sets the spec), site work and grading, whether the utilities are already at the site or need a new connection, impact glazing, and how much interior finish you want outside the factory unit. The parts-plus-labor breakdown goes in writing. You’ll see the line items, the material brands named, and the labor separate. Under the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order.
The 365-Day Done Right Promise backs the work: if it’s not done right, we make it right. That’s printed, with terms, not an asterisk. Every project also gets a documented photo record on every visit – included, not an upgrade – so you have evidence of what we found and what we did.
DIY or Call Us?
You can safely check a lot yourself. Caulk and sealant at the panel seams, paint and finish condition, the state of the skirting, and where water is puddling. Photograph what you see. That record is useful whether you hire us or not.
Where DIY goes wrong: structural connections, anchoring, and utility tie-ins. These are load-rated and code-referenced. A surface caulk fix over a compromised seam looks fine for a month and leaks by August. And anything that touches the electrical service is off the table for a homeowner. There’s a reason we don’t write a step-by-step for that work here.
If you want a Free Second Opinion on any written estimate from a competitor, bring it. We’ll read it line by line at no charge. Call (844) 834-4248 and a live person answers, any hour.
FAQs

With maintained seals, gaskets, and skirting, a finished unit and its addition hold up well past a couple of decades in South Florida, but the sealing and fastening details are what determine that lifespan here. Salt air and wet-season humidity accelerate wear on exposed metal and sealant, so the maintenance cycle is shorter than in a dry climate. Call (844) 834-4248 for a walk-through and a written assessment.
Often, yes. Seal and gasket failures are repairs, not replacements. Anchor and utility junction issues can usually be corrected without tearing out the addition. A structural concern in the connection detail is the exception, and that’s why we inspect before quoting. Call (844) 834-4248 for a free estimate on either path.
An addition runs weeks, and a full ADU on a fresh foundation is measured in months, depending on permitting, site work, and finish scope. We put the timeline in the written scope before you commit, and the schedule moves only on a signed change order. Call (844) 834-4248 with your scope and we’ll quote it.
We source against the spec sheet and the panel identification marks on your unit, using OEM-spec components for anything structural or load-rated and quality aftermarket equivalents for finishes. We don’t carry stock, so lead time depends on the part. Call (844) 834-4248 and we’ll quote parts and labor on the page, in writing.
Ready to put a number on paper? Call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate on your Boxabl-compatible home addition or ADU – written price, written scope, and a photo record when the crew leaves. Our crews are background-checked and uniformed, a live person answers the phone around the clock, and every project is held to the Haven Standard.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












