A Rowan company - serving Homestead, FL
A living room with a wall of new windows and a sliding glass door
CGI · Homestead

CGI Fence Installation in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The Homestead Owner’s Guide

Fence installation runs $3500 – $9000 installed in Homestead for a typical residential CGI-compatible run, and the number that matters is the written one, delivered before a single post is set. This page is a fence-installation guide, so it covers what a new CGI-style fence involves: panels, posts, footings, gates, and the permits that come with them in Miami-Dade County. If you are reading this because an existing fence has started to lean, sag, or rust through at the posts, the symptom picture usually starts the same way in Homestead: a gate that drags on the driveway. Then a post that moves in the wind. Then a panel that never quite straightens out.

Call (844) 834-4248

Rowan Construction Group Homestead is an independent construction contractor and is not affiliated with CGI. We install CGI-compatible fence systems and other brands including KraftMaid, Cambria, and Silestone on the interior side of the house. Under Clause 1 of The Haven Standard, the price is written before anyone starts.

Key Takeaways

  • A standard Homestead CGI-compatible fence install lands in the $3500 – $9000 range.
  • Salt air, limestone soil, and wet-season ground movement drive most fence failures here.
  • Miami-Dade permits and wind-load requirements shape what you can legally build.
  • Written price before work starts. No change without a signed change order.
  • Which CGI Models This Applies To

    New double-hung windows in a dining room

    CGI fence systems are built around a few core families: ornamental aluminum runs, vinyl and composite privacy panels, and mixed-material fence combining metal posts with composite boards. Your model line and series code sit on the hardware itself in most cases. Look on the inside of the post cap for a stamped part or series number, on the panel bracket where it meets the post, and on the gate hinge for a size designation. Measure the panel width and the post height before you call anyone. A 6-foot panel system and an 8-foot panel system use different posts, different brackets, and different gate hardware, and the size is what tells us which CGI-compatible parts you actually need.

    For CGI specifically, the OEM-versus-aftermarket decision comes down to footings and finish. OEM posts are cut to the CGI system’s hole spacing; aftermarket posts often aren’t. On a Homestead property, the finish matters more than the brand stamp: salt air eats through low-grade galvanized coatings fast, and an aftermarket post with the wrong coating fails long before the OEM one would. We install CGI-compatible systems using parts matched to your existing line where that’s the right call, and replace a whole run where retrofit is the more honest choice. If your existing fence is a different manufacturer, we’ll say so on the written quote rather than assume.

    Explore

    Styles & brands we work with

    • Kitchen remodeling
    • Bathroom remodeling
    • Home additions & ADU
    • Roofing
    • Windows & doors
    • Driveway & pavers
    • Fence

    Signs Your CGI Fence Installation Is Failing

    • Posts leaning after a wet season. Homestead’s limestone soil and summer rain saturate the ground around footings; if the original footing wasn’t deep enough, the post moves. A post that leans a quarter-inch after a rainy week is usually the start of a deeper footing problem.
    • Rust streaks on the aluminum. Salt air from the Miami-Dade coast corrodes lower-grade coatings, and the streaks start at the welds and cut edges. That’s a coating failure, not a cosmetic issue.
    • Gate drags on the driveway. Either the hinge has worn through or the gate post has shifted. Hinge wear is a hardware swap. Post shift means the footing is gone.
    • Panels sagging between posts. A loose bracket or a post that’s tilted out of plumb. Ignore it long enough and the panel weight pulls the bracket out of the post entirely.
    • White rust on galvanized parts. That’s zinc oxidation from humid air and standing water at the base. It means the coating has already been compromised.
    Before & after

    See the difference

    Before - Recent ProjectBeforeAfter - Recent ProjectAfter
    Recent Project
    Before - Full RestorationBeforeAfter - Full RestorationAfter
    Full Restoration
    Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
    Complete Upgrade

    Replacement Cost & What’s Included

    Installers setting a new window and checking it for level

    Fence installation in Homestead runs $3500 – $9000 for a typical residential run, installed. What moves the number is length, panel height, gate count, footing depth, and the condition of the ground. A property with hard limestone near the surface can add footing time. Every quote is a flat written price with a written scope, delivered before work starts, in writing.

    The quote breaks out panels, posts, footings, hardware, and labor as separate line items. Installation work is backed by the 365-Day Done Right Promise: if it isn’t done right, Rowan makes it right. Every visit includes a documented photo record as a standard deliverable. The photo record is part of the job, not an upgrade. If you have a competitor’s written estimate, bring it in and we’ll review it line by line at no charge under the Free Second Opinion offer.

    DIY or Call Us?

    A homeowner can safely check a few things: walk the fence and note which posts move, measure panel and post heights, photograph the series code inside a post cap, and check whether the gate hinge is loose. Those checks cost nothing and they make the written quote more accurate.

    Where DIY goes wrong in Homestead is footings and wind load. A fence in Miami-Dade County sits under specific wind-load and permit requirements, and a post set in shallow concrete without a permit can fail inspection or fail the first hurricane. Fence installation done without the proper footing depth and the proper coating specification is a wasted weekend. Call (844) 834-4248 to schedule your free estimate, and we’ll put the price in writing before any work starts.

    FAQs

    A remodeled primary bathroom with a soaking tub and walk-in shower

    Ideas for every part of the house

    Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

    Read our project guides
    A new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA single-story rear room addition with tall windows and a new patioA new clay tile roofA new front yard fence with a matching gateA new paver pool deck

    Explore more projects

    Every project below starts the same way: a free on-site visit and a written price.

    Getting started with Rowan in Homestead

    Every project starts with a conversation and a written price. Here is how to take the first step.

    A project lead walking the house with the homeowner during a free estimate

    Free on-site estimate

    A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

    Book an estimate
    A crew arriving at a home with materials and tools

    Your Homestead team

    A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

    Areas we serve
    A worker laying floor protection before work starts

    Read our written promise

    What we promise on every job, written down, with the terms spelled out before any work starts.

    Our promise
    Need Construction help nationwide? Licensed & insured · free written estimates
    Call (844) 834-4248
    Local Service Coverage

    Request a Free Estimate in Homestead

    Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

    By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

    Prefer to text? Text Us
    Call Now - 24/7 Dispatch