







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Homestead Owner’s Guide
We install and remodel kitchens built around CGI cabinetry and components, and in Homestead a full kitchen remodel typically runs $14,000 to $45,000 installed, with smaller kitchens landing between $9,000 and $20,000. Most owners come to us not because the house needs everything redone, but because one piece of their CGI kitchen has started to fail: a drawer that no longer glides, a door that will not stay shut, or a cabinet box that swelled after a humid summer. That single failure is usually where the research starts, and it is where we start too.
Key Takeaways
- CGI kitchens in Homestead fail most often at the hinges, drawer glides, and box joints, not the cabinet faces.
- You can replace individual components without replacing the entire kitchen in most cases.
- Full remodel ranges run $14,000 to $45,000; component repair and replacement cost far less.
- Humidity and salt air in South Florida shorten hardware lifespan compared to inland climates.
Which CGI Models This Applies To

CGI cabinetry and kitchen systems appear in a wide range of production and semi-custom kitchens built in South Florida, and matching the right replacement part starts with identifying the system you actually have. The most reliable way is to look inside a cabinet door or on the back panel of a drawer box, where the manufacturer label usually sits. That label gives you a model or series code, which is what a supplier needs to match hinge style, drawer glide series, and box dimensions. Without it, you are guessing, and guessing leads to parts that almost fit.
One detail that catches owners: CGI has used more than one drawer glide series over the years, and the mounting screw pattern differs between them. A glide from the wrong series will not line up with the existing holes, and drilling new ones weakens the box side. Measure the glide length, the screw spacing, and the box depth before you order anything. On the OEM-versus-aftermarket question, we source compatible equivalents for glides, hinges, and shelf clips where the original is no longer available or is priced unreasonably. For structural cabinet boxes and door faces, we match the original finish and profile so the replacement does not stand out. We are an independent contractor and are not affiliated with CGI; we work with what is in your kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
Owners in Homestead usually notice a failing component in one of these five ways. Each points to a specific cause, and knowing the cause tells you whether you are looking at a small fix or a larger one.
- A drawer that sticks or will not close flush. The glide has worn, lost its lubricant, or bent from overload. In Homestead humidity, the glide track can also collect grit that accelerates wear.
- A cabinet door that sags or will not stay shut. The hinge has loosened or the hinge plate screws have stripped the particleboard. This is common where humidity has softened the box material around the screws.
- A soft or swollen cabinet box. Moisture has gotten into the substrate, usually near the sink or under a poorly sealed countertop edge. Swollen substrate does not dry back to its original shape.
- Peeling or bubbling on door and drawer faces. The laminate or thermofoil has lifted, often from heat near the range or moisture near the sink. Once it lifts, it rarely re-adheres cleanly.
- A countertop that has separated from the cabinet line. The substrate or caulk has failed, letting water track behind the backsplash. This one is worth catching early because it leads to box swelling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Homestead, component replacement is priced separately from a full remodel, and the ranges below reflect installed cost, parts and labor together. We put the number in writing before any work starts, with a written scope and a written warranty, and no change proceeds without a signed change order.
| Service | Installed Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: how many cabinets are involved, whether the boxes are sound enough to keep, countertop material and edge profile, and whether plumbing or electrical has to move. Older Homestead kitchens sometimes need a substrate repair before new faces or tops go on, and we document that with photos before quoting the fix so the price reflects what is actually there. Every visit includes a photo record of what we found and what we did, and our 365-Day Done Right Promise covers the work.
DIY or Call Us?
You can safely check a few things yourself: open a drawer and look at the glide for cracks or debris, test a hinge by opening and closing the door slowly, and look under the sink for soft spots or staining. Writing down the label code from inside a cabinet also saves time on the call. Where DIY goes wrong is in replacing glides and hinges without matching the series, and in trying to repair swollen substrate, which typically needs cutting out and replacing rather than patching. Cabinet boxes carry weight and the countertop above them is heavy; working under an unsupported top is a real risk. If the box is soft, stop and call us. For an exact quote on your CGI kitchen in Homestead, call (844) 834-4248 – estimates are free.
FAQs

How long do CGI kitchen cabinet components last in Homestead? Glides and hinges typically last eight to twelve years in South Florida humidity before they need replacement, often less near the coast where salt air speeds corrosion. The cabinet boxes themselves last longer if moisture stays out.
Can the part be repaired instead of replaced? Sometimes yes. A loose hinge can often be re-anchored with a repair plate, and a sticking glide can be cleaned and re-lubricated. Swollen substrate and lifted laminate generally cannot be repaired and need replacement. Call (844) 834-4248 for an exact quote – estimates are free.
How long does a component swap take? Replacing glides or hinges on a set of cabinets is usually a half-day to a full-day job, depending on how many units are involved. A cabinet box replacement takes longer because the countertop above it may need to be released and reset.
How do you source the replacement part? We match by the label code and by measuring the glide length, screw spacing, and box depth. Where the original is discontinued, we source a compatible equivalent and confirm fit before installing. We also work with KraftMaid, Cambria, and Silestone components when a kitchen has been updated with those brands alongside CGI.
Call (844) 834-4248 for a free estimate on your CGI kitchen in Homestead. We will look at what failed, show you the photo record, and put the number in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












