A Rowan company - serving Homestead, FL
A home with a brand-new roof and gutters at golden hour
CGI · Homestead

CGI Roofing in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Roofing: The Homestead Owner’s Guide

We install and repair CGI-compatible roofing in Homestead, and a standard roof replacement typically runs $8,000 – $20,000 installed, with individual repairs at $400 – $1,800. When a CGI roof goes bad, most Homestead owners find out the same way: a brown ring spreads across a ceiling near an interior wall after a heavy afternoon storm, or they spot granules piling up in the gutter on the driveway side of the house. Sometimes it starts with a shingle edge curling up along the west elevation where the summer sun hits hardest. The part has failed before the leak announces it.

Call (844) 834-4248

We’re an independent service provider. Rowan Construction Group Homestead is not affiliated with CGI, and we don’t stock or ship parts from a truck. What we do is match the right system to your home, quote a written flat price before anyone climbs a ladder, and put a documented photo record in your hands when we’re done.

Key Takeaways

  • CGI-compatible roof replacement in Homestead: $8,000 – $20,000 installed.
  • Targeted repairs: $400 – $1,800, depending on the failure and how much decking is involved.
  • Metal systems, where the home calls for one: $15,000 – $40,000.
  • Tile repairs on CGI-style profiles: $600 – $2,500.
  • Every job starts with a written scope and flat price. Free second opinion on any competitor quote.

Which CGI Models This Applies To

New architectural shingles with a clean valley

CGI manufacturing spans several product families, and the first thing we establish is which one is on your roof. Some CGI profiles are asphalt-based shingle systems; others are the metal panel and stone-coated lines. Spray-foam and tile-adjacent products also appear under related brand families. The spec sheet on your original install paperwork, if you have it, names the product line and the manufacturer. If you don’t, we measure it. Panel width, shingle tab spacing, and the printed label on the back of a loose tab or panel edge identify the family for certain.

That identification matters because the compatibility window is tighter than most owners expect. A stone-coated CGI panel from one production run won’t always align cleanly with a panel from another. Fastener spacing, batten height, and the underlayment rated for the assembly all shift by family and, in some cases, by lot. We pull the measurements before we order, and we tell you what we found in plain terms.

On the OEM-versus-aftermarket question, our answer is the same one we give on cabinets and countertops: match the spec, not the label. Original CGI parts are the safest fit where the profile and color are still in production. Where they aren’t, a quality aftermarket equivalent built to the same wind rating and profile works fine, and we’ll show you the spec sheet side by side with the OEM before you decide. The wrong move is a generic shingle dropped over a CGI panel assembly. It leaks at the transition, and it fails inspection.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Roofing Is Failing

  • Granule loss in the gutters. Asphalt-based CGI shingles shed granules as they age, and heavy granule accumulation in the gutter means the protective surface is breaking down. In Homestead’s humidity, once the granules are gone, the mat underneath is exposed to UV and moisture together.
  • Curling or lifted edges on the sun-facing slope. South and west elevations in Homestead take the afternoon heat, and your CGI panels or tabs will lift there first. A lifted edge is a wind-entry point on the next named storm.
  • Ceiling stains and attic moisture. A brown ring on the drywall near an exterior wall usually means water is getting in at a flashing or panel joint, not through the shingle face. The stain is the visible symptom; the flashing is the cause.
  • Loose or missing fasteners on metal CGI panels. Salt air and wind vibration work fasteners loose, and a panel that’s not fastened tight lifts and cracks at the seam. We see this especially on roofs older than fifteen years on the barrier-island side.
  • Rust at cut edges and penetrations. Coastal humidity accelerates corrosion on any bare metal edge or penetration collar. Once rust starts at a cut, the seam is compromised, and the repair needs to address both the edge and the water path behind it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Roof work in Homestead runs higher than inland Florida because of wind-mitigation requirements, humidity, and the salt exposure on the eastern side of the county. Here’s what a written quote from us looks like in dollars.

  • Full CGI-compatible roof replacement: $8,000 – $20,000 installed.
  • Targeted CGI roof repair: $400 – $1,800.
  • Metal panel system where the profile calls for it: $15,000 – $40,000.
  • Tile repair on CGI-style tile profiles: $600 – $2,500.

The range is driven by roof square footage, the number of layers being removed, decking condition once the old roof is off, and whether the assembly needs upgraded underlayment for wind rating. We list parts and labor as separate lines on the quote. If we find soft decking under the old shingles, that’s a change order, and no change proceeds without your signature. The written warranty comes with the quote, and the 365-Day Done Right Promise backs the work.

DIY or Call Us?

Checking your roof from the ground is safe and useful. Look for lifted edges, granule accumulation in the gutters, dark streaks on the decking from below, and rust at any penetration you can see from a ladder you don’t climb. Photograph it.

Repairing the roof itself is not a safe owner job in Homestead. Steep-slope work at height, particularly after a wet night, is where the serious injuries happen, and a bad repair on a CGI assembly can void a wind-mitigation credit your insurer is counting on. We send background-checked, uniformed technicians, and every visit includes a documented photo record as a standard deliverable, not an upgrade. Call (844) 834-4248 to schedule a free estimate, and we’ll review any competitor quote line by line at no charge.

FAQs

A new bay window with a cushioned seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new stained cedar privacy fenceA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new wood side gate with black hardwareA new concrete driveway with a paver border

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch