







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in The Crossings, FL
Quick answer: We provide independent CGI service across The Crossings, FL, connecting homeowners with vetted local pros who work on CGI’s impact window and door lines every week. What makes our approach different here: in The Crossings, a CGI impact window or door swap has to clear Miami-Dade County product approval (NOA paperwork) and your HOA’s architectural review before installation, and that dual layer is where most projects stall. Call (844) 834-4248 for a free, written estimate.
We’re an independent service provider. We’re not affiliated with, authorized by, or sponsored by CGI, so our recommendations stay honest about when a unit should be repaired and when it should be replaced.
Why The Crossings Residents Choose Us for CGI Service

The Crossings is built out. There’s no open land here, no new plats going up on the western edge. That means the CGI work we see in The Crossings is almost all retrofits: a failed sliding door in a 1990s CBS ranch, a fogged impact window that’s been sunbaked since the housing boom, a lanai door frame leaking where the sealant dried out. Our technicians have up to 19 years of experience with these exact retrofits, and they know CGI’s Series 7000 and 9000 window profiles, the Armor Series, and the 8000 sliding glass door line well enough to diagnose failures by appearance and behavior, not just a callback.
Because we work alongside independent contractors who specialize in CGI products, we understand how CGI’s cabinet lines and impact window systems integrate with Miami-Dade’s strict product-approval rules. We also know the OEM-versus-aftermarket question matters: critical components like impact glass and locking mechanisms need OEM parts to hold their code compliance, while weather seals and hardware can take quality aftermarket replacements without risk. Response is fast. A written price comes before any work starts, every time. Call (844) 834-4248 to start with a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in The Crossings
These are the CGI failure modes we encounter most often in The Crossings housing stock. Each one ties to something specific about this part of west Miami-Dade.
- Failed perimeter seals on impact windows. After years of intense summer UV and wind-driven rain, the weatherstripping and perimeter sealant on a CGI impact unit degrades, and water finds its way around the frame rather than through the glass. In The Crossings, where every home sits squarely in the hurricane-season rain corridor, this is the single most common call we get.
- Corroded stainless rollers and hinges in CGI sliding doors. Salt-laden humidity attacks the roller assemblies and hinge hardware on CGI Series 8000 sliders, and after enough seasons the door stops rolling smoothly and starts dragging. Most homeowners assume the door needs replacing; often it just needs hardware attention.
- Impact glass seal failure, visible as clouding or fogging. When the glazing seal fails on an older CGI unit, moisture gets between the panes and the glass hazes over. The frame is usually still sound. The glass is not.
- Leaks at window and door openings from poor original installation. A CGI window installed without proper Miami-Dade NOA-compliant flashing or sealing will leak at the rough opening during a heavy downpour, no matter how good the unit itself is. This one shows up in The Crossings as interior water staining long before anyone looks up at the frame.
- Screen enclosure frame leaks and uplift at the lanai. Many The Crossings homes back onto screened pool enclosures, and the frames around sliding doors and lanais are chronic moisture entry points through repeated wind load.
CGI Service in The Crossings: What Local Conditions Mean for Your Equipment
Here’s the fact that changes everything about CGI work in The Crossings: this is unincorporated Miami-Dade County, not a city with its own building department. So every CGI impact window or door replacement has to pass county-level product approval under the NOA system, and then clear The Crossings HOA’s architectural review, which is a dual-permitting layer that doesn’t exist in neighboring cities that run their own permitting. A pro who shows up without county-level NOA experience and HOA submittal experience gets your project stuck in review, and the construction window in this one HOA-governed plat is narrow. Because the subdivision is essentially built out, there’s no alternate route through new construction. It’s permitted renoviction or nothing. That’s what separates a CGI job in The Crossings from the same job a few miles east on a Kendall or Tamiami parcel.
CGI Models & Products We Service in The Crossings
We handle the CGI lines homeowners here actually have on their windows and doors: CGI Impact Windows in the Series 9000 and Series 7000 profiles, the CGI Armor Series impact windows, CGI Impact Sliding Glass Doors (Series 8000), and CGI impact French doors. For each unit, our approach is the same. We match OEM replacement parts for structural and code-critical components – impact glass, locking mechanisms – and permit quality aftermarket parts for non-structural pieces like seals and hardware where they hold up. Parts are sourced per job rather than pulled from local stock, because CGI doesn’t have a dealer presence in this part of Miami-Dade and honest lead times come from ordering to spec. Call (844) 834-4248 for a written scope on your specific CGI units.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in The Crossings

A written price is delivered before any work starts, which under the Haven Standard’s Clause 1 is the whole point. Here’s what typical CGI projects run in The Crossings:
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
What drives the number on a CGI window job is unit count and size, whether the rough opening needs reframing, and how much NOA-compliant flashing and sealing the existing install requires. On roof replacements, material choice and whether the home has flat or low-slope sections (common leak points in The Crossings) move the number. A free estimate here means a line-item written quote plus a free second opinion on any competitor’s written estimate. Call (844) 834-4248 to schedule it.
Serving The Crossings, FL – Our Local Coverage Area
We serve The Crossings and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in The Crossings
Yes. Because The Crossings is unincorporated Miami-Dade County, every CGI impact window or door you install must match a product with current Miami-Dade NOA approval. That’s a county-level requirement, and it applies on top of your HOA architectural review. A qualified pro will confirm the NOA number on the exact model before ordering, not after the unit arrives. Call (844) 834-4248 if you want us to verify the paperwork on a specific CGI Series 7000 or 9000 unit.
It adds a review step before installation can begin, and in The Crossings that step can run weeks depending on the HOA’s architectural committee schedule. A pro with HOA submittal experience will get the drawings and product specs filed early, so review runs in parallel with ordering rather than after it. Call (844) 834-4248 to talk timing before you sign anything.
Impact Window Installation in The Crossings runs $8,000 – $25,000. Multiple units, larger openings, and existing frames that need reframing push toward the top of that range. Call (844) 834-4248 for an exact quote – estimates are free.
Sometimes yes, sometimes no. Fogging means the glazing seal failed, and if the frame and hardware are still sound, a single glass replacement is usually the cost-effective call. When several units across the home have failed, full replacement is the more honest answer. Call (844) 834-4248 and we’ll tell you which case you’re in.
Yes. The subtropical UV and wind-driven rain here wear down sealant and weatherstripping faster than in drier climates, so annual inspection of the perimeter seal and hardware is the single most useful thing you can do. Re-caulking a failing seal early often avoids replacing the unit. Call (844) 834-4248 to schedule an inspection.
Service Areas Near The Crossings
We connect homeowners with vetted, licensed pros across west Miami-Dade: Homestead, Leisure City, Naranja, Princeton, Goulds, and South Miami Heights. If you’re near Three Lakes or Country Walk, the same HOA-governed, county-permitted approach applies. For more on our local coverage in this ZIP, see our The Crossings service area page and our dedicated CGI service overview.
Book Your CGI Service in The Crossings Today
Written price before any work starts. Background-checked, uniformed technicians. Documented photo record on every visit, included. The 365-Day Done Right Promise backs every job, and same-day availability is on the table for urgent water-intrusion calls. Call (844) 834-4248 to schedule your free estimate in The Crossings.
Written by the team at Rowan Construction Group.












