







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Homestead Owner’s Guide
A CWS driveway or paver installation that’s failing usually shows itself as shifting pavers, sunken joints, or a walkway that holds water after every summer storm. We install and repair CWS-compatible driveway and paver systems across Homestead, with paver driveway work typically running $7,000 – $18,000 installed and repairs we can often schedule within a few days. Rowan Construction Group Homestead is an independent contractor and is not affiliated with CWS. We quote a flat written price before anyone touches your drive, and you’ll get a photo record of what we found when the crew leaves.
Owners here tend to discover the problem the same way: a paver lifts slightly under a car tire, or a joint in the driveway suddenly holds a puddle. By the time the first paver rocks, the base layer underneath has usually been working loose for a season or two. Homestead’s flat lots and high water table mean that water has to go somewhere, and a CWS system that wasn’t built with drainage in mind will find the weak spot for you.
Key Takeaways
- Installed paver driveways in Homestead run $7,000 – $18,000 depending on square footage, base depth, and paver selection.
- Repairs are often possible before full replacement, and we’ll tell you which you actually need.
- Most CWS paver failures trace back to the base layer and drainage, not the surface stones.
- You get a written price and a photo record before work starts. Free second opinion on any written estimate you already have.
Which CWS Models This Applies To

CWS paver lines and driveway systems share the same core construction: a compacted aggregate base, a bedding sand layer, the pavers themselves, and a polymeric sand joint fill. The part that fails depends on which component you’re looking at. The surface pavers, the base course, the edge restraint, and the joint sand each wear differently, and each is separable on a CWS system rather than a single sealed slab.
To identify what you’re working with, look at the underside of a lifted paver. CWS pavers are typically stamped with a manufacturer mark and sometimes a series code. Measure the face dimensions, note the color and finish, and photograph from above and from the side. That measurement plus the code is what lets us match a replacement. If your paver has no visible mark, we can still match by thickness and face size, but the color lot matters more than anything else; a new batch of the same model can read a shade cooler or warmer than a two-year-old drive.
On the OEM-versus-aftermarket question for CWS specifically: the brand doesn’t have a broad aftermarket paver market the way some driveway brands do, so a match usually means the same CWS series or a compatible product from Belgard or Techo-Bloc at equal thickness. We carry neither brand on a truck; we source to order after we’ve measured your drive, and we’ll show you the spec before you sign a quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Rocking or loose pavers. A paver that moves underfoot has lost bedding sand, which means the base layer seated underneath it has shifted or settled. This is the earliest and most fixable sign in Homestead’s soil and high water table.
- Puddling that doesn’t drain. Standing water after a rain usually means the slope or the edge restraint has changed. On a CWS drive, the joint sand can wash out in heavy storms, and water then finds its way under the surface instead of running off.
- Joints that keep emptying. Polymeric sand that keeps washing out of the same joints tells you water is moving through the bed, not across it. Left alone, the base under those joints softens.
- Edge restraint movement. The concrete or plastic edge that holds the pavers in place can creep on a drive that sees heavy vehicle loads. Once it moves, the outermost row starts to widen and shift inward.
- Efflorescence or chalky bloom on the pavers. That white haze is mineral salt migrating to the surface, usually because there’s moisture trapped under and a trend of poor drainage. It’s cosmetic at first and a base problem by the time it recurs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Homestead, paver driveway installation runs $7,000 – $18,000 installed. A straight repair of a few lifted pavers typically sits well under that range. Concrete driveway installation, if you’re replacing rather than repairing, runs $4,500 – $12,000, and driveway replacement across the whole surface runs $5,000 – $14,000. Paver patio installation in the same market runs $3,500 – $11,000, and driveway sealing runs $250 – $700.
What drives the range: driveway square footage, base depth needed to handle your soil, paver product and thickness, edge restraint scope, and whether drainage has to be improved. A flat sand joint on a small drive is not the same job as a 20-foot-wide drive with a failing base, and we price them differently because they are different jobs.
Every quote is a flat written price with a written scope and a written warranty. The 365-Day Done Right Promise is printed on every page, not buried in fine print. If your price needs to change mid-job, nothing proceeds until the change order is signed. We also offer a Free Second Opinion on any written estimate you’ve already received; bring it and we’ll go through it line by line.
DIY or Call Us?
What you can safely check: whether pavers are rocking, whether joints are washing out, whether the edge restraint is holding, and where water pools after a rain. You can photograph all of that. Those photos are useful to us and to you.
What goes wrong with DIY: lifting and resetting a paver without correcting the base underneath just delays the same failure by a few months. Edge restraint repair, drainage corrections, and any work on a drive with subgrade movement of more than a small fraction of an inch are not jobs a homeowner should take on. Improper base prep on a paver driveway isn’t just cosmetic; it can create a trip hazard on a walkway, catch a vehicle tire wrong on a drive, and cost more to fix than the original install.
Call (844) 834-4248 to schedule your free estimate. We’ll look at the drive, tell you whether it’s repair or replacement, and put the number in writing.
FAQs

A properly installed paver driveway should hold up for 25 to 30 years or more, but Homestead’s wet season and high water table are hard on the base layer, not the pavers. We regularly see CWS drives here that fail at the base within 10 to 15 years while the pavers themselves still look fine. Base depth and drainage decisions made at install are the real lifespan variable. Call (844) 834-4248 for an assessment of your specific drive.
Often, yes. Lifted pavers, washed-out joints, and localized edge restraint movement are typically repairable without touching the whole drive. Full replacement becomes the honest answer when the base underneath has failed across a wide area, or when more than a small portion of the surface is rocking. We’ll tell you which category your drive is in before you spend anything. Call (844) 834-4248 to schedule a look.
A small repair, such as resetting a few pavers and refilling joints, is usually a few hours of work. A base correction over a larger section runs a day or more, and a full driveway replacement typically takes three to five days depending on square footage and weather. We give you an honest timeline in the written scope. Call (844) 834-4248 for a scheduling conversation.
We measure your existing pavers and identify the series from the stamp or underside when possible, then source the matching product to order. The color lot matters more than the model on an existing drive, and we tell you upfront when a new batch won’t be a perfect visual match. We don’t claim to stock CWS parts and we don’t carry pavers on a truck; we source what’s needed and show you the spec before we order. Call (844) 834-4248 for a free estimate.
Rowan Construction Group Homestead also works with KraftMaid, Cambria, and Silestone on interior projects, though this page stays on CWS driveway and pavers because that’s what you came here to solve.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












