







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Homestead, FL
We provide independent Dvele service across Homestead, FL – roof repair, impact window installation, and full kitchen remodeling on modular and panelized Dvele homes. The one thing that shapes our Dvele work here: Homestead sits inside the post-Hurricane Andrew high-velocity wind zone, so every joint, connection, and opening we touch has to answer to Dade County’s wind-mitigation paperwork, which is a stricter standard than most of South Florida builds to.
We’re an independent provider, not a Dvele dealer or authorized builder. We work from the as-built module drawings outward, using our own up to 19 years of technician experience. Call (844) 834-4248 to schedule your free written estimate.
Why Homestead Residents Choose Us for Dvele Service

Dvele builds factory-finished modules with a defined panelized shell and proprietary connections. That means the parts that fail aren’t the parts a CBS block-and-stucco contractor expects. We’ve spent time learning how those modules land, seal, and finish in a real subtropical climate – and how they hold up under Homestead’s specific conditions.
Our technicians have up to 19 years of experience working with modular assembly, sealant specification, and impact-rated opening upgrades. We source OEM or documented-equivalent connection hardware and sealants, because substituting generic brackets on a modular shell can void the assembly’s wind and water performance. Every visit includes a documented photo record as a standard deliverable – not an upgrade – so you have evidence of what we found and what we did.
Under Clause 1 of the Haven Standard, your price is written before any work starts. No change proceeds without a signed change order. That matters on a modular home, where an open joint can reveal hardware conditions that shift a scope once the finish comes off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Homestead
- Module-to-module joint sealant and gasket failure. The spline joints between Dvele modules are the first place UV and wind-driven rain attack in South Florida. Degraded sealant shows up as interior staining at ceiling lines and wall seams, not an obvious roof leak. Homestead’s June-through-November storm season finds those joints fast.
- Corroded connection hardware and structural screws. Fasteners that were fine at the factory weather differently after years of salt-laden air off Biscayne Bay, minutes away. They’re buried behind finishes, so they surface as squeaks, fastener pop, and hairline cracks at module corners.
- Wet-season moisture trapped in wall and roof assemblies. Dvele panels arrive largely finished. Any seam left open or trim-out delayed lets Homestead’s summer humidity and mold pressure into cavities that are hard to dry later. We inspect the envelope close-out, not just the visible leak.
- Factory roof edge and site-built tie-in on a modular shell. The roof-to-wall connection often needs re-work to meet post-Andrew wind-load and secondary water barrier expectations. On older Homestead homes rebuilt after Andrew, we also check whether an added structure loads the tie-in differently.
- Impact-rated opening upgrades at module openings. Swapping glass isn’t enough. Getting to wind-zone compliance usually means reframing at the module opening to carry the load rating, which is a different scope than a standard window replacement.
Dvele Service in Homestead: What Local Conditions Mean for Your Equipment
Homestead’s construction market is defined by rebuilding after Hurricane Andrew in 1992 and the Florida Building Code that followed – the strictest wind-load requirements in the country. That’s not background. It changes what we can and can’t do on a Dvele home. Dade County runs on product-approval and wind-mitigation documentation as a matter of routine, and any work on a Dvele module’s roof edge, openings, or connections usually has to be documented to that standard. A builder from outside the county often doesn’t have those forms at hand, and the homeowner ends up with a repair that can’t be shown to an insurer. Along the Redland edge, older storm-scarred housing and rebuilt slabs sit next to fast-built 2000s-to-2020s subdivisions, so the same Dvele scope looks different block to block. We open the joint, inspect the hardware and flashing, re-seal to the assembly’s specification, restore the finish, and hand you the tie-in paperwork with the photo record attached.
Dvele Models & Products We Service in Homestead
We cover the Dvele single-story modular residence (Q Series-style panelized and volumetric modules), the two-story stacked-module home, and the Dvele ADU module package. Each has its own joint geometry, connection hardware, and trim profiles, so we match parts by assembly rather than by what’s on hand. We claim no local stock – parts for a given scope are sourced to the exact model and documented before the crew arrives, with OEM or documented equivalents specified in the written scope. That applies across roof repair, impact window installation, and full kitchen remodeling, where cabinet runs and countertops have to work around module seams and MEP chases rather than a conventional stick-built wall.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Homestead

Here’s the pricing we quote in Homestead, in dollars:
| Service | Typical Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives cost: whether hardware and flashing are sound once the joint opens, how many openings need reframing for impact rating, and how much finish restoration the seam repair requires. A free estimate includes a joint-by-joint inspection, a written scope, a flat written price, and a written warranty – before anyone picks up a tool. Call (844) 834-4248 for your written number.
Serving Homestead, FL – Our Local Coverage Area
We serve Homestead and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Homestead
Is Rowan Construction Group Homestead a Dvele-authorized builder or dealer? No. We’re an independent provider, not a Dvele dealer or authorized builder. We work on Dvele homes from the as-built module drawings outward and never represent ourselves as manufacturer-affiliated.
My Dvele home has water staining along a ceiling seam after summer storms – is that a roof leak? Usually not. A common cause is the module-to-module gasket and sealant line letting wind-driven rain track inward, sometimes with corrosion or loosening at the connection hardware behind the finish. The right first step is opening the joint to inspect hardware and flashing, not re-roofing blind. Call (844) 834-4248 and we’ll take a look – estimates are free.
Can impact windows be added to a Dvele module opening without changing the factory frame? Sometimes, but not always. When the opening needs reframing to meet post-Andrew wind-load and secondary water barrier expectations, the frame has to come into the scope. We tell you which case you’re in after inspecting the opening itself.
Does a Dvele modular shell change how a kitchen or bathroom remodel is priced? Yes. Cabinet runs, countertops, and fixture placement have to work around module seams and MEP chases instead of a conventional stick-built wall, and that layout work is quoted up front. Call (844) 834-4248 for an exact range.
Will working on my Dvele home affect its wind-mitigation insurance credits? It can, for better or worse. Documented re-sealing, tie-in, and impact-rated openings can support credits; undocumented work can complicate them. We record the tie-in and hand you the photo record for that reason.
Service Areas Near Homestead
We serve Homestead and the surrounding corridor, including our Homestead service area coverage, Leisure City, Naranja, Princeton, Goulds, and South Miami Heights. Each has its own mix of rebuilt Andrew-era housing and newer subdivisions, so scopes get priced on what’s actually there. See our Dvele service page for the full picture.
Book Your Dvele Service in Homestead Today
Call (844) 834-4248 for a free written estimate on your Dvele home. We open the joint, inspect the hardware, and put the number in writing before any work starts. Estimates are free, and a live person answers every call. Homestead homeowners can also ask for a free second opinion on any written estimate you already have.
Written by the team at Rowan Construction Group Homestead.












